Hosted by IDTechEx
The source for global news on
printed, organic and flexible electronics,
interpreted by experts
HomeApplicationsTechnologyEventsReportsAdvertiseTVCareersAbout UsSign-up or LoginIDTechExTwitterFacebookLinkedInGoogle+YoutubeRSSForward To Friend
Posted on May 04, 2011

New pixel technology for next generation of consumer electronics

Printed, Organic & Flexible Electronics Forecasts,
The technology that makes your smart phone's display screen fast, bright and lightweight could be coming to your television or laptop, thanks to a new type of light emitting transistor created by University of Florida researchers.
The new transistor design resolves a key issue that has kept the organic light-emitting diode, or OLED, technology used in small screens from being viable for computer monitors or televisions.
"It's a very practical sort of development that could have big implications for consumers," said UF physics professor Andrew Rinzler, author of a paper about the development that appears in the April 29 issue of the journal Science. "Progress from LCD to OLED has been slow. This new design should remove some of the stumbling blocks that have prevented OLEDs from being implemented in larger displays."
OLED display pixels use less power, create a brighter picture and don't have the viewing-angle issues of LCD pixels, which consume power even when they are their dark state.
Despite these advantages, OLED displays have been largely limited to hand-held devices because of the difficulty of making transistors to drive the OLEDs. The new transistor design opens up possibilities to tackle that problem with a new transistor that uses organic semiconductors —man-made compounds that contain carbon. Though much researched and improved over the last several decades, these materials consume too much power when used in the conventional transistor design.
E-Textiles 2017-2027: Technologies, Markets, Playe
That's where the new design comes in. Making use of carbon nanotubes, it allows organic semiconductors to efficiently drive the high currents needed by OLED pixels, but at lower voltages.
In addition to redesigning the transistor that powers the OLED within each pixel, the team also combined the transistor and the OLED into a single device called a light emitting transistor. The resulting carbon nanotube enabled vertical organic light-emitting transistor, or CN-VOLET, is more than eight times more energy efficient than the closest competing devices.
That leads to another advantage, Rinzler said: "The light emitter can occupy more of the pixel area, giving the same light output at a lower current density through the light emitter. Since high current density degrades the lifetime of the light emitter, the change should make these devices last longer."
The integrated design should also reduce manufacturing complexity, which could lead to lower costs, Rinzler said.
In addition to its potential impact on consumer electronics, the development also could help pave the way for more affordable radio frequency identification tags, which are used in inventory tracking for retailers, Rinzler said.
Other members of Rinzler's research team were postdoctoral fellows Mitchell McCarthy and Bo Liu in cooperation with Doyoung Kim and professor Franky So of UF's Department of Materials Science and Engineering, with help from the Center for Nanophase Materials Sciences at Oak Ridge National Labs in Tennessee. The work was supported by Nanoholdings LLC and the National Science Foundation.
Printed and Flexible Sensors 2017-2027: Technologi
Source: University of Florida
Image: A blue test pixel generated by a carbon nanotube-enabled organic light-emitting transistor. CREDIT: Science/AAAS