Hosted by IDTechEx
The source for global news on
printed, organic and flexible electronics,
interpreted by experts
HomeApplicationsTechnologyEventsReportsAdvertiseTVCareersAbout UsSign-up or LoginIDTechExTwitterFacebookLinkedInGoogle+YoutubeRSSForward To Friend

Printing the largest solar cells

Posted on May 20, 2013 with 1 Comment
Printed and Flexible Sensors 2015-2025
Scientists have produced the largest flexible, plastic solar cells in Australia - 10 times the size of what they were previously able to - thanks to a new solar cell printer that has been installed at CSIRO.
 
The printer has allowed researchers from the Victorian Organic Solar Cell Consortium (VICOSC) - a collaboration between CSIRO, The University of Melbourne, Monash University and industry partners - to print organic photovoltaic cells the size of an A3 sheet of paper. According to CSIRO materials scientist Dr Scott Watkins, printing cells on such a large scale opens up a huge range of possibilities for pilot applications. "There are so many things we can do with cells this size," he says. "We can set them into advertising signage, powering lights and other interactive elements. We can even embed them into laptop cases to provide backup power for the machine inside."
 
The new printer, worth A$200,000, is a big step up for the VICOSC team. In just three years they have gone from making cells the size of a fingernail to cells 10cm square. Now with the new printer they have jumped to cells that are 30cm wide. VICOSC project coordinator and University of Melbourne researcher Dr David Jones says that one of the great advantages of the group's approach is that they're using existing printing techniques, making it a very accessible technology.
 
PEE16 - Generic
"We're using the same techniques that you would use if you were screen printing an image on to a T-Shirt," he says. Using semiconducting inks, the researchers print the cells straight onto paper-thin flexible plastic or steel. With the ability to print at speeds of up to ten metres per minute, this means they can produce one cell every two seconds. As the researchers continue to scale up their equipment, the possibilities will become even greater.
 
"Eventually we see these being laminated to windows that line skyscrapers," Dr Jones says. "By printing directly to materials like steel, we'll also be able to embed cells onto roofing materials."
 
The organic photovoltaic cells, which produce 10-50 watts of power per square metre, could even be used to improve the efficiency of more traditional silicon solar panels. "The different types of cells capture light from different parts of the solar spectrum. So rather than being competing technologies, they are actually very complementary," Dr Watkins says.
 
The scientists predict that the future energy mix for the world, including Australia, will rely on many non-traditional energy sources. "We need to be at the forefront of developing new technologies that match our solar endowment, stimulate our science and support local, high-tech manufacturing. While the consortium is focused on developing applications with current industrial partners there are opportunities to work with other companies through training programs or pilot-scale production trials," he says.
 
Wearable Technology 2015-2025
As part of the consortium, a complementary screen printing line is also being installed at nearby Monash University. Combined, they will make the Clayton Manufacturing and Materials Precinct one of the largest organic solar cell printing facilities in the world.
 
The Victorian Organic Solar Cell Consortium is a research collaboration between CSIRO, The University of Melbourne, Monash University, BlueScope Steel, Robert Bosch SEA, Innovia Films and Innovia Security. It is supported by the Victorian State Government and the Australian Government through the Australian Renewable Energy Agency.
 
Source and top image of Dr Scott Watkins holding a sheet of flexible solar cells: CSIRO
 
 

There is a comment for this article

Nice Module. It might be the largest in Australia, but not the largest module overall. Please google for "It is all in the Pattern—High-Efficiency Power Extraction from Polymer Solar Cells through High-Voltage Serial Connection" as I cannot post the link to the journal paper. (80m x 30 cm OPV module with 16000 serial connected cells. Fully printed and ITO-free)

Related Posts

Related IDTechEx Events

Related Research Reports from IDTechEx

Leave a Comment

Your email address will not be published.
Please enter the numbers and/or letters in the image.
Required fields are marked *
  • Popular
  • Recent
  • Comments
Portal
Asia Forum 1