JournalArticle SearchList By TopicSubmit ArticleRegister
ResourcesWhite PapersGlossaryStock TrackerPresentations
24 May 2011
New technique could enable fiber-based electronic and photonic devices
Researchers at MIT have succeeded in making a fine thread that functions as a diode, a device at the heart of modern electronics. This feat — made possible by a new approach to a type of fiber manufacturing known as fiber drawing — could open up possibilities for fabricating a wide variety of electronic and photonic devices within composite fibers, using a variety of materials.
Fiber-drawing techniques are used to produce the optical fibers behind much of today's broadband communications, but these techniques have been limited to materials that can partially melt and stretch like taffy at the temperatures being used for drawing the fibers. The new work demonstrates a way of synthesizing new materials during the fiber-making process, including materials whose melting points are far higher than the temperatures used to process the fibers. The simple proof-of-concept demonstration carried out by the MIT researchers could open the door to a wide array of sophisticated devices based on composite fibers, they say.
The findings, part of a doctoral research project in materials science by Nicholas Orf, have been published in the journal Proceedings of the National Academy of Sciences.
All previous work on fiber-drawing ended up with the same materials that were there to begin with, just in a different shape, Orf says, adding: "In this method, new materials are formed during the drawing process."
Fiber drawing involves preparing a "preform" of materials, such as a large glass rod resembling an oversized model of the fiber to be produced. This preform is heated until it reaches a taffy-like consistency and then pulled into a thin fiber. The materials comprising the preform remain unchanged as its dimensions are drastically reduced.
In the current research, the preform contained selenium, sulfur, zinc and tin, arranged within a coating of polymer material. The drawing process, carried out at a temperature of just 260 degrees Celsius (500 degrees Fahrenheit), combined these materials to form fibers containing zinc selenide, even though that compound has a melting point of 1,530 degrees Celsius (2,786 degrees Fahrenheit).
The resulting fiber was a simple but functional semiconductor device called a diode — a sort of one-way valve for electrical current, allowing electrons to flow through it in only one direction. The diode, never before made by such a method, is a basic building block for electrical circuits.
"This shows that many more kinds of materials can be incorporated into fibers than ever before," Orf says. Because the physical arrangements placed in the preform are preserved in the drawn fiber, it should ultimately be possible to incorporate more complex electronic circuits within the structure of the fiber itself.
Such fibers might find uses as sensors for light, temperature or other environmental conditions, Orf says. Or the fibers could then be woven, such as to make a solar-cell fabric, he says.
Yoel Fink, associate professor says his research group has been working for more than a decade on expanding the kinds of materials and structures that can be incorporated into fibers. He says that despite the rapid progress made in the last few decades in various forms of electronics, "there has been little progress in advancing the overall functionality and sophistication of fibers and fabrics ... one of the earliest forms of human expression."
The group's research, he says, has stemmed from the basic question, "How sophisticated can a fiber be?" Over the years they have incorporated more and more materials, structures and functions into fibers. But one of the biggest limitations has been the set of materials that could be incorporated into the fibers; this new work has greatly expanded that list. The work shows that it is possible, Fink says, "to use the fiber draw as a way to synthesize new materials. It's the first time this has been demonstrated anywhere."
Zinc selenide, the specific compound formed in this drawing process, is an important material for both its electronic and its optical properties, Orf says. Such fibers might have uses in new photonic circuits, which use light beams to perform functions similar to those carried out by flowing electrons in electronic circuits.
While this experiment produced 15 individual diode devices in the fiber, each separate from the others, Fink says that through continuing research, "We think you could probably do hundreds" and even interconnect them to form electronic circuits.
Professor John Ballato, director of the Center for Optical Materials Science and Engineering Technologies at Clemson University, adds, "There has been growing international interest in semiconducting optical fibers over the past few years. Such fibers offer the potential to marry the optoelectronic benefits of semiconductors, which we know from the silicon photonics and integrated circuit worlds, with the light guidance and long path lengths of optical fibers." The new MIT work is particularly significant, he says, because of "the utilization of the fiber as a micro solid-state chemical reactor to realize materials that are not generally amenable to direct fiber fabrication."
Ballato, who was not involved in this research, adds that a similar technique has been used to produce reactions using gases, but that to the best of his knowledge, "this is the first ... to extend this concept to the solid state, where indeed a more bountiful opportunity exists to achieve a wider range of materials." The process is so flexible and has the potential to be used with such a range of materials, he says, that "it can be considered an important step to a 'fiber that does everything' — creates, propagates, senses and manipulates photons, electrons and phonons."
The work was supported by the U.S. Army through the MIT Institute for Soldier Nanotechnologies and by the Materials Research Science and Engineering Center Program of the National Science Foundation.
Top image: Samples of materials that have been made into fibers in the lab of MIT's Yoel Fink. The initial material is made into a 'preform,' in the lower portion, which is then heated and drawn out like taffy into a fiber from the top, preserving the arrangement of materials within the structure. Photo: Greg Hren/RLE
For more attend:Printed Electronics USA 2011 .
Thin film, printed/vacuum processed, flexible/rigid: costs and rival analysisFrom dyads to flexible glass: encapsulation solutions for displays and photovoltaics
- Organic Photovoltaics (OPV) 2013-2023: Technologies, Markets, Players
- Barrier Films for Flexible Electronics 2013-2023: Needs, Players, Opportunities
- Dye Sensitized Solar Cells (DSSC/DSC) 2013-2023: Technologies, Markets, Players
- Graphene Markets, Technologies and Opportunities 2013-2018
- Thin Film Photovoltaics 2012-2022: Forecasts, Technologies, Analysis
- Conductive Ink Markets 2014-2024: Forecasts, Technologies, Players
- Transparent Conductive Films (TCF) 2014-2024: Forecasts, Markets, Technologies
- Printed, Organic & Flexible Electronics: Forecasts, Players & Opportunities 2013-2023
- Electroactive Polymers and Devices 2013-2018: Forecasts, Technologies, Players
- Inorganic and Composite Printed Electronics 2012-2022: Needs, Opportunities, Forecasts
- Printed and Flexible Sensors 2014-2024: Technologies, Players, Forecasts
- Energy Harvesting and Storage for Electronic Devices 2014-2024: Forecasts, Technologies, Players
- New Opportunities for Gold: Conductive Inks for the Electronics Industry 2013-2019
- Functional Materials for Future Electronics: Metals, Inorganic & Organic Compounds, Graphene, CNT
- Stretchable Electronics Comes to Market
- Touch Screen Modules: Technologies, Markets, Forecasts 2012-2022
- Electrochemical Double Layer Capacitors: Supercapacitors 2014-2024
- RFID Forecasts, Players and Opportunities 2014-2024
- Metal Oxide TFT Backplanes for Displays 2013-2018: Analysis, Trends, Forecasts
- Introduction to Printed, Organic and Flexible Electronics
- Printed Electronics - Customer Sourcebook & Routes to Profit
- Printed, Flexible and Organic Electronics » Applications & Markets » Consumer Goods/Electronics
- Printed, Flexible and Organic Electronics » Sensors, Sound & Actuators » Sensors
- Printed, Flexible and Organic Electronics » Power
- Printed, Flexible and Organic Electronics » Applications & Markets » Transport & Military
- Photovoltaics ~
- Printed, Flexible and Organic Electronics » Materials ~
Organic Photovoltaics (OPV) 2013-2023: Technologies, Markets, Players
Barrier Films for Flexible Electronics 2013-2023: Needs, Players, Opportunities
Dye Sensitized Solar Cells (DSSC/DSC) 2013-2023: Technologies, Markets, Players
Graphene Markets, Technologies and Opportunities 2013-2018
Thin Film Photovoltaics 2012-2022: Forecasts, Technologies, Analysis
Conductive Ink Markets 2014-2024: Forecasts, Technologies, Players
Transparent Conductive Films (TCF) 2014-2024: Forecasts, Markets, Technologies
Printed, Organic & Flexible Electronics: Forecasts, Players & Opportunities 2013-2023
Electroactive Polymers and Devices 2013-2018: Forecasts, Technologies, Players
Inorganic and Composite Printed Electronics 2012-2022: Needs, Opportunities, Forecasts
Printed and Flexible Sensors 2014-2024: Technologies, Players, Forecasts
Energy Harvesting and Storage for Electronic Devices 2014-2024: Forecasts, Technologies, Players
New Opportunities for Gold: Conductive Inks for the Electronics Industry 2013-2019
Functional Materials for Future Electronics: Metals, Inorganic & Organic Compounds, Graphene, CNT
Stretchable Electronics Comes to Market
Touch Screen Modules: Technologies, Markets, Forecasts 2012-2022
Electrochemical Double Layer Capacitors: Supercapacitors 2014-2024
RFID Forecasts, Players and Opportunities 2014-2024
Metal Oxide TFT Backplanes for Displays 2013-2018: Analysis, Trends, Forecasts
Introduction to Printed, Organic and Flexible Electronics
Printed Electronics - Customer Sourcebook & Routes to Profit
Financing for invisible energy harvesting coatings
Excitons observed in action for the first time
Smartphone battery fully charges in thirty seconds
The automotive sector strengthens adoption of supercapacitors
US Navy sends Bluefin Robotics' AUV in search of Malaysian airliner
Danish company produces high-tech lightweight-chassis