Published By
IDTechEx
Follow us:
follow us on twitter
subscrive to our rss feed
follow us on facebook
Email
Password
IDTechEx
Printed Electronics World

Printed Electronics-Predictions for 2011

ZoomPrinted Electronics-Predictions for 2011
In this article, we examine what to expect for 2011. To do that, we must understand the spectacular successes of the recent past as well as the failures. This has often been an industry with poor business planning and marketing.
 
For example, in e-readers, Plastic Logic belatedly realised it could not meet Apple and Amazon head on and it said it would create a professional sector but such a niche may never exist. It failed to launch a product anyway.
 
Those developing printed organic and inorganic flexible solar cells, most of which had life of no more than five years, obsessed about replacing power stations by meeting "grid parity" efficiency when the potential lay in consumer goods, military, healthcare and media.
Lessons from failure
Frequently, participants tried to run before they could walk or at least chose objectives that were too ambitious for the level of investment available.
 
For example, Microemissive Displays, OLED-T and many other Organic Light Emitting Display companies are no more. Those making printed antennas and keyboards prospered.
 
Some have simply failed to meet the price- performance points necessary for market entry. For example, no one has taken a meaningful order for the long promised printed organic transistors, despite transistors being the engine of most electronics. That has had a severe knock on effect.
 
For example, the printed organic memory of Thin Film Electronics AB and many printed sensors cannot fulfil their primary market potential without them.
Lessons from success
There are important lessons from the recent successes too. The Amazon Kindle™ e-reader is the antidote to phones and computers we cannot read in sunshine. It is partly printed with an excellent route to further weight and cost reduction using more printing. It replaces books.
 
The Apple i-Pad™ is not killing the Kindle because it is not simply an e-reader and it is in color. You need a spectacularly better product in the eyes of potential users to compete effectively with either of these powerful global brands with their unsurpassed routes to market. An example would be a color e-readers tightly rolled into your mobile phone but no such product is in prospect for 2011.
Historical event - replacing silicon chips
Certain small orders for printed and partly printed electronics in 2010 were of deep significance. For example, the Kovio order for disposable electronic train tickets in Los Angeles saw formidable printed nano silicon electronics in the form of over 1000 transistors printed by ink jet and screen printing onto stainless steel foil.
 
Being compatible with the world's most popular RFID specification ISO 14443 which was designed for silicon chips, this analog-digital circuit was a tour de force announcing to the world that a huge variety of the simpler integrated circuits can now be replaced by lower cost, more flexible and more robust printing albeit on stainless steel foil because of the high temperature anneal currently required.
Promotional
Equally significant was Dai Nippon Printing in Japan taking its first orders for multifunctional posters on the Tokyo Metro incorporating printed animated OLED and ac electroluminescent technology powered by printed organic photovoltaics.
 
In addition, trials by Toppan Forms in Japan of interactive posters have been successful. These involved sound, activated by touching, printed ac electroluminescent and electrophoretic displays and printed organic photovoltaics for power.
 
At a stroke, the world's existing posters, packaging and point of display material are rendered boring, relatively ineffective and an embarrassment. It is equivalent to the arrival of television: if you just make radios watch out.
Military
2010 also saw the US Air Force committing very serious money to vehicles made possible by flexible photovoltaics, notably unmanned upper atmosphere surveillance aircraft and dirigibles covered with the stuff. One order exceeded $500 million. The benefits include light weight and flexibility. You do not put glass sheets on a balloon.
Healthcare
Much smaller sums were committed to buying printed electronic products for healthcare, with ongoing business in electronic tamper evidence and entirely printed electric skin patches. However, in the background, a great deal of work was going on to develop electronic healthcare disposables for testing and drug administration.
Forecasts
All of which brings us to 2011. Many companies that have got the message of starting with the easier printed electronics will launch simple devices based on printed diodes and conductive patterns etc. The old idea of printing a transparent conductive layer not with expensive, clever chemicals but with fine metal patterns will re-emerge and gain first major orders.
 
Simple ink stripe RFID using low cost printed metals will gain market share. Printable copper inks will start to sell well. NovacentrixPulseforge ™ which anneals high temperature electronic inks on low temperature substrates will be widely deployed.
 
Expect one of the new electric cars to incorporate largely printed ceiling and dashboard control clusters saving 10 to 40% of cost, weight and space in 2011 and improving reliability and weather proofing. Less certain is whether the lowest cost printed displays, the electrochromic ones, will overcome barriers to major market entry. Some of our clients cite unappealing appearance and lack of low cost drive circuits. The limited life is not a problem for most envisaged applications.
 
Of course, life is of great importance in many potential applications of printed electronics and the 2-3 years of printed organic photovoltaics and five years for DSSC photovoltaics will be inadequate in some cases. For example car companies and the military demand 15 years and 20 years is needed for photovoltaics on houses or ships.
 
Enter flexible printed copper indium gallium diselenide CIGS photovoltaics where Nanosolarand maybe others will make first major deliveries in 2011. Lifetime of these initial products are unclear as yet but long life is in prospect.
 
Equally desirable is transparent flexible printed electronics demanded by all market sectors. The kingpins here will be the commercialisation of transparent photovoltaics, transistor circuits and batteries but, unfortunately, these are unlikely to be in major production by the end of 2011.
 
The tiny number of imaginative product designers familiar with printed electronics will continue to spring surprises. Expect yet more animated and interactive paper magazines in the tradition of the E-ink Esquire edition in 2008 and the color LCD with sound in an edition of Entertainment Age in 2009.
 
We shall certainly see printed electronics in more toys, novelties, apparel and healthcare disposables.
 
The annual IDTechEx event Printed Electronics Europe - which will be held in Dusseldorf, Germany on April 5-6, will cover all these topics. In particular, the event features Demonstration Street - where you can see working printed electronics products in action. Register now and save with the early bird rate - see www.IDTechEx.com/peEurope External Link.

Author

Raghu Das

Raghu Das

Raghu Das is the CEO of IDTechEx. He has authored many reports on the topic and conducts global consulting projects.
Telephone
+44 (0)1223 812300
Email
 
 

Research

Printed Electronics for Healthcare, Cosmetics and Pharmaceuticals 2014-2024

IDTechEx:logo404Opportunities for premium pricing, safer and lower cost products: case studies, technologies, players and forecasts
 

Stretchable Electronics and Electrics 2015-2025: Technologies, Markets, Forecasts

IDTechEx:logo483Elastically/Inelastically stretchable electronics and electrics, e-textiles, e-fibers
 
 
 

Learn More

 
Portal
 
Printed, Organic & Flexible Electronics
Webinars Generic Banner
Conductive Ink Markets 2014-2024
Display Week

IDTechEx Reports

Printed Electronics for Healthcare, Cosmetics and Pharmaceuticals 2014-2024
Printed Electronics for Healthcare, Cosmetics and Pharmaceuticals 2014-2024
Stretchable Electronics and Electrics 2015-2025: Technologies, Markets, Forecasts
Stretchable Electronics and Electrics 2015-2025: Technologies, Markets, Forecasts
Internet of Things (IoT): Business Opportunities 2015-2025
Internet of Things (IoT): Business Opportunities 2015-2025
Smart Packaging Comes To Market: Brand Enhancement with Electronics 2014-2024
Smart Packaging Comes To Market: Brand Enhancement with Electronics 2014-2024
Wearable Technology 2014-2024: Technologies, Markets, Forecasts
Wearable Technology 2014-2024: Technologies, Markets, Forecasts
Electric Vehicle Forecasts, Trends and Opportunities 2015-2025
Electric Vehicle Forecasts, Trends and Opportunities 2015-2025
Printed, Organic & Flexible Electronics Forecasts, Players & Opportunities 2014-2024
Printed, Organic & Flexible Electronics Forecasts, Players & Opportunities 2014-2024
Electric Aircraft 2014-2024: Trends, Projects, Forecasts
Electric Aircraft 2014-2024: Trends, Projects, Forecasts
RFID Forecasts, Players and Opportunities  2014-2024
RFID Forecasts, Players and Opportunities 2014-2024
Printed and Flexible Sensors 2014-2024: Technologies, Players, Forecasts
Printed and Flexible Sensors 2014-2024: Technologies, Players, Forecasts
Hybrid and Electric Vehicles for Military, Police & Security 2012-2022
Hybrid and Electric Vehicles for Military, Police & Security 2012-2022
OLED Lighting Opportunities 2015-2025: Forecasts, Technologies, Players
OLED Lighting Opportunities 2015-2025: Forecasts, Technologies, Players
Wireless Sensor Networks (WSN) 2014-2024: Forecasts, Technologies, Players
Wireless Sensor Networks (WSN) 2014-2024: Forecasts, Technologies, Players
Wireless Power Transmission for Consumer Electronics and Electric Vehicles 2014-2024
Wireless Power Transmission for Consumer Electronics and Electric Vehicles 2014-2024
Touch Screen Modules: Technologies, Markets, Forecasts 2012-2022
Touch Screen Modules: Technologies, Markets, Forecasts 2012-2022
Printed and Chipless RFID Forecasts, Technologies & Players 2011-2021
Printed and Chipless RFID Forecasts, Technologies & Players 2011-2021
Introduction to Printed, Organic and Flexible Electronics
Introduction to Printed, Organic and Flexible Electronics
 
Energy Harvesting JournalElectric Vehicles Research