Hosted by IDTechEx
Printed Electronics World
Jun 7, 2017
Tri-D-Innov adds electronics on plastics

Tri-D-Innov adds electronics on plastics

Startup company Tri-D-Innov provides additive metallization for plastic and composite materials electronic packaging.
Printed Electronics World
Jun 7, 2017
Stretchable electronics: near term commercial success stories

Stretchable electronics: near term commercial success stories

In this article we highlight one stretchable electronics technologies with potential to become near-term success stories: interconnects.
Printed Electronics World
Jun 7, 2017
Novel copper nanoparticles that are resistant to oxidation

Novel copper nanoparticles that are resistant to oxidation

Novel copper nanoparticles that are resistant to oxidation and fuse into a conductive line after sintering process at temperatures lower than 160 degrees Celsius.
Printed Electronics World
Jun 6, 2017
Miracle material discovery could end cracked smart devices

Miracle material discovery could end cracked smart devices

Currently, most parts of a smart phone are made of silicon and other compounds, which are expensive and break easily.
IDTechEx Research Subscribers
Display Week 2017: The display industry doesn't have a roadmap

Display Week 2017: The display industry doesn't have a roadmap

IDTechEx was at the annual Display Week in Los Angeles to report on the latest trends in displays.
Printed Electronics World
Jun 2, 2017
Possibilities of biosensors as a tattooed interface

Possibilities of biosensors as a tattooed interface

Can tattoos embrace technology in order to make the skin interactive?
Printed Electronics World
May 31, 2017
Webinar Thursday 15 June - New Innovations in Diabetes Technology

Webinar Thursday 15 June - New Innovations in Diabetes Technology

IDTechEx are hosting a free webinar on Thursday 15th June titled New Innovations in Diabetes Technology.
Printed Electronics World
May 30, 2017
Conductive inks: major innovation themes and trends

Conductive inks: major innovation themes and trends

An often overlooked fact about the conductive industry is that it has seen significant innovation over the past decade. Indeed, the industry has a long history of developing new materials and formulations in response to changing market needs and new applications.
IDTechEx Research Subscribers
Highlights from CPES 2017

Highlights from CPES 2017

On May 24-25th 2017, James Hayward from IDTechEx attended CPES 2017. The event brought together an excellent group of both Canadian and international speakers to discuss several key areas in the printed and flexible electronics space. This article will address each area in turn, including smart packaging, IoT, structural and 3D electronics and textile/wearable electronics.
Printed Electronics World
May 29, 2017
European collaboration include everyday items in Internet of Things

European collaboration include everyday items in Internet of Things

The Necomada consortium has announced that it will be addressing the material challenges associated with the Internet of Things, to allow for the integration of electronics into a wide range of everyday items.
Printed Electronics World
May 26, 2017
Using distinctive body locations to control mobile devices

Using distinctive body locations to control mobile devices

Researchers are placing ultra-thin, electronic tattoos on distinctive body locations. The user can touch, squeeze or pull them, and thereby intuitively control mobile devices such as a music player, or easily make indicators light up.
IDTechEx Research Subscribers
A report from Plastics Japan 2017

A report from Plastics Japan 2017

IDTechEx Technology analysts' Drs Richard Collins and Khasha Ghaffarzadeh attended Plastics 2017 at the Tokyo Big Sight, Japan. These slides give some highlights from the Plastics event and extends to composite material and adhesion-free metal-plastic joining solutions.
IDTechEx Research Subscribers
A report from the IDTechEx Show!

A report from the IDTechEx Show!

May 10th-11th saw the 2017 European-leg of the IDTechEx Show! In this article IDTechEx analysts share some of the most interesting innovations on offer at the show.
Printed Electronics World
May 24, 2017
Augmented, virtual, annotated, mixed... A "$37 Billion reality"

Augmented, virtual, annotated, mixed... A "$37 Billion reality"

Augmented and virtual reality headsets are by now a reality (pun intended), and they bring about a paradigm shift in form factor for portable electronics.
Printed Electronics World
May 24, 2017
ARM & PragmatIC

ARM & PragmatIC

Discuss pushing the boundaries in flexible electronics
Printed Electronics World
May 23, 2017
How scientists turned a flag into a loudspeaker

How scientists turned a flag into a loudspeaker

A paper-thin, flexible device created not only can generate energy from human motion, it can act as a loudspeaker and microphone as well.
Printed Electronics World
May 22, 2017
Webinar Thursday 1 June 2017 - AR & VR Headsets 2017-2027

Webinar Thursday 1 June 2017 - AR & VR Headsets 2017-2027

IDTechEx are hosting a free webinar on Thursday 1 June 2017.
Printed Electronics World
May 22, 2017
The clever electronic inks rewriting our energy future

The clever electronic inks rewriting our energy future

Australia's position in printed solar has surged, following the unveiling of its first printed solar demonstration.
Printed Electronics World
May 19, 2017
Report from the IDTechEx Show! Berlin, Germany 2017

Report from the IDTechEx Show! Berlin, Germany 2017

Strong positive feedback and growth at Europe's most important event on emerging technologies
Printed Electronics World
May 19, 2017
Plastic Logic flexible displays help create smart bracelet

Plastic Logic flexible displays help create smart bracelet

Controlled by a smartphone app, the bracelet's flexible E Ink display can be continually re-customised with different digital patterns.
Printed Electronics World
Jun 7, 2017
Tri-D-Innov adds electronics on plastics

Tri-D-Innov adds electronics on plastics

Startup company Tri-D-Innov provides additive metallization for plastic and composite materials electronic packaging.
Printed Electronics World
Jun 7, 2017
Novel copper nanoparticles that are resistant to oxidation

Novel copper nanoparticles that are resistant to oxidation

Novel copper nanoparticles that are resistant to oxidation and fuse into a conductive line after sintering process at temperatures lower than 160 degrees Celsius.
IDTechEx Research Subscribers
Display Week 2017: The display industry doesn't have a roadmap

Display Week 2017: The display industry doesn't have a roadmap

IDTechEx was at the annual Display Week in Los Angeles to report on the latest trends in displays.
Printed Electronics World
May 31, 2017
Webinar Thursday 15 June - New Innovations in Diabetes Technology

Webinar Thursday 15 June - New Innovations in Diabetes Technology

IDTechEx are hosting a free webinar on Thursday 15th June titled New Innovations in Diabetes Technology.
IDTechEx Research Subscribers
Highlights from CPES 2017

Highlights from CPES 2017

On May 24-25th 2017, James Hayward from IDTechEx attended CPES 2017. The event brought together an excellent group of both Canadian and international speakers to discuss several key areas in the printed and flexible electronics space. This article will address each area in turn, including smart packaging, IoT, structural and 3D electronics and textile/wearable electronics.
Printed Electronics World
May 26, 2017
Using distinctive body locations to control mobile devices

Using distinctive body locations to control mobile devices

Researchers are placing ultra-thin, electronic tattoos on distinctive body locations. The user can touch, squeeze or pull them, and thereby intuitively control mobile devices such as a music player, or easily make indicators light up.
IDTechEx Research Subscribers
A report from the IDTechEx Show!

A report from the IDTechEx Show!

May 10th-11th saw the 2017 European-leg of the IDTechEx Show! In this article IDTechEx analysts share some of the most interesting innovations on offer at the show.
Printed Electronics World
May 24, 2017
ARM & PragmatIC

ARM & PragmatIC

Discuss pushing the boundaries in flexible electronics
Printed Electronics World
May 22, 2017
Webinar Thursday 1 June 2017 - AR & VR Headsets 2017-2027

Webinar Thursday 1 June 2017 - AR & VR Headsets 2017-2027

IDTechEx are hosting a free webinar on Thursday 1 June 2017.
Printed Electronics World
May 19, 2017
Report from the IDTechEx Show! Berlin, Germany 2017

Report from the IDTechEx Show! Berlin, Germany 2017

Strong positive feedback and growth at Europe's most important event on emerging technologies
Printed Electronics World
Jun 7, 2017
Stretchable electronics: near term commercial success stories

Stretchable electronics: near term commercial success stories

In this article we highlight one stretchable electronics technologies with potential to become near-term success stories: interconnects.
Printed Electronics World
Jun 6, 2017
Miracle material discovery could end cracked smart devices

Miracle material discovery could end cracked smart devices

Currently, most parts of a smart phone are made of silicon and other compounds, which are expensive and break easily.
Printed Electronics World
Jun 2, 2017
Possibilities of biosensors as a tattooed interface

Possibilities of biosensors as a tattooed interface

Can tattoos embrace technology in order to make the skin interactive?
Printed Electronics World
May 30, 2017
Conductive inks: major innovation themes and trends

Conductive inks: major innovation themes and trends

An often overlooked fact about the conductive industry is that it has seen significant innovation over the past decade. Indeed, the industry has a long history of developing new materials and formulations in response to changing market needs and new applications.
Printed Electronics World
May 29, 2017
European collaboration include everyday items in Internet of Things

European collaboration include everyday items in Internet of Things

The Necomada consortium has announced that it will be addressing the material challenges associated with the Internet of Things, to allow for the integration of electronics into a wide range of everyday items.
IDTechEx Research Subscribers
A report from Plastics Japan 2017

A report from Plastics Japan 2017

IDTechEx Technology analysts' Drs Richard Collins and Khasha Ghaffarzadeh attended Plastics 2017 at the Tokyo Big Sight, Japan. These slides give some highlights from the Plastics event and extends to composite material and adhesion-free metal-plastic joining solutions.
Printed Electronics World
May 24, 2017
Augmented, virtual, annotated, mixed... A "$37 Billion reality"

Augmented, virtual, annotated, mixed... A "$37 Billion reality"

Augmented and virtual reality headsets are by now a reality (pun intended), and they bring about a paradigm shift in form factor for portable electronics.
Printed Electronics World
May 23, 2017
How scientists turned a flag into a loudspeaker

How scientists turned a flag into a loudspeaker

A paper-thin, flexible device created not only can generate energy from human motion, it can act as a loudspeaker and microphone as well.
Printed Electronics World
May 22, 2017
The clever electronic inks rewriting our energy future

The clever electronic inks rewriting our energy future

Australia's position in printed solar has surged, following the unveiling of its first printed solar demonstration.
Printed Electronics World
May 19, 2017
Plastic Logic flexible displays help create smart bracelet

Plastic Logic flexible displays help create smart bracelet

Controlled by a smartphone app, the bracelet's flexible E Ink display can be continually re-customised with different digital patterns.
More IDTechEx Journals