Hosted by IDTechEx
HomeApplicationsTechnologyEventsReportsTVAdvertiseCareersAbout UsIDTechExTwitterFacebookLinkedInYoutubeRSSForward To Friend
Printed Electronics World
Nov 1, 2017
Who Wants Printed Electronics: Drivers by Industry

Who Wants Printed Electronics: Drivers by Industry

This article raises the problems faced in five industries, driving the organizations involved to look at printed electronics solutions.
Printed Electronics World
Nov 1, 2017
Spotlight on Graphene Solutions, LLC

Spotlight on Graphene Solutions, LLC

Commercializing research and development using graphene and carbon nanotube technologies
Printed Electronics World
Nov 1, 2017
Harness the Power of High Dispersion Technology - Cavitation

Harness the Power of High Dispersion Technology - Cavitation

ACI Materials offers high performance functional inks for Flexible Hybrid Electronics and Wearable applications.
Printed Electronics World
Oct 31, 2017
Research breaks new ground in memory technology

Research breaks new ground in memory technology

An international research team pioneered the development of a novel thin, organic film that supports a million more times read-write cycles and consumes 1,000 times less power than commercial flash memories.
Printed Electronics World
Oct 31, 2017
Piezoelectrics stretch their potential

Piezoelectrics stretch their potential

Thin-film piezoelectrics, with dimensions on the scale of micrometers or smaller, offer potential for new applications where smaller dimensions or a lower voltage operation are required.
Printed Electronics World
Oct 30, 2017
IDTechEx TVAn overview of the IDTechEx Show! USA

An overview of the IDTechEx Show! USA

Raghu Das, CEO and Chris Clare, Event Director, IDTechEx tells you what to expect at the upcoming IDTechEx Show! held at the Santa Clara Convention Center, November 15-16 2017.
Printed Electronics World
Oct 30, 2017
Research yields significant thermoelectric performance

Research yields significant thermoelectric performance

Scientists reported significant advances in the thermoelectric performance of organic semiconductors based on carbon nanotube thin films that could be integrated into fabrics to convert waste heat into electricity or serve as a small power source.
Printed Electronics World
Oct 30, 2017
Hybrid 3-D printing method for flexible electronics

Hybrid 3-D printing method for flexible electronics

A collaboration between scientists has resulted in a new method for digital design and printing of stretchable, flexible electronics. The process, called Hybrid 3-D printing, uses additive manufacturing to integrate soft, conductive inks with a material substrate to create stretchable, wearable electronic devices.
Printed Electronics World
Oct 27, 2017
IDTechEx TVBy 2027 the biosensor market worldwide will be worth 33 billion

By 2027 the biosensor market worldwide will be worth 33 billion

What is a point-of-care device? Dr David Pugh and Dr Laura Baers discuss how biosensors are changing the ways that diseases are diagnosed.
IDTechEx Research Subscribers
Key Takeaways from Composites in the Marine Sector Conference

Key Takeaways from Composites in the Marine Sector Conference

Fibre reinforced polymers (FRP), more often commonly referred to simply as composites, give excellent strength and stiffness to weight ratios along with other beneficial properties. The main reason for their exploitation is for lightweighting, which has resulted in them being used in nearly every sport and transportation industry. Marine is no exception to this trend
Printed Electronics World
Oct 27, 2017
Nanotube fiber antennas as capable as copper

Nanotube fiber antennas as capable as copper

Fibers made of carbon nanotubes configured as wireless antennas can be as good as copper antennas but 20 times lighter, according to researchers. The antennas may offer practical advantages for aerospace applications and wearable electronics where weight and flexibility are factors.
IDTechEx Research Subscribers
Printing Electronics: Highlights of Some New Manufacturing Advances

Printing Electronics: Highlights of Some New Manufacturing Advances

In this subscriber-only content IDTechEx highlights some of the latest developments in printing and manufacturing processes for electronics.
Printed Electronics World
Oct 26, 2017
NASCAR, JCDecaux, Galvani and Terrafugia to open the IDTechEx Show!

NASCAR, JCDecaux, Galvani and Terrafugia to open the IDTechEx Show!

Opening the IDTechEx Show! in Santa Clara, Nov 15-16, are four select Cornerstone presentations which will showcase how new technologies are coming to market which solve big problems created by changing demographics and global megatrends, from mobility to healthcare to enabling the ubiquity of electronics.
Printed Electronics World
Oct 26, 2017
IDTechEx TVInnovative material for soft sensor could bring new tactile tech

Innovative material for soft sensor could bring new tactile tech

A new type of soft and stretchable sensor could find uses in applications ranging from athletics and health monitoring to prosthetics and virtual reality.
Printed Electronics World
Oct 26, 2017
Drone delivery: publicity stunt or game changer in instant fulfilment?

Drone delivery: publicity stunt or game changer in instant fulfilment?

The idea of drone delivery sharply divides commentator opinion: some dismiss it as a mere publicity stunt whilst others consider it a game changer that will bring near instant product fulfilment to e-commerce, stripping traditional shops of their last major differentiator.
Printed Electronics World
Oct 26, 2017
ITO and its alternatives: the next major growth phase will come?

ITO and its alternatives: the next major growth phase will come?

ITO and ITO alternative have, in recent years, faced challenging market conditions. Sluggish growth, together with increased supply and the threat of substitutes, led to price falls, even price wars, forcing an industry consolidation.
Printed Electronics World
Oct 26, 2017
Passive RFID Sensors Overtake Battery Assisted RFID Sensors

Passive RFID Sensors Overtake Battery Assisted RFID Sensors

IDTechEx Research assesses that the entire RFID market will be worth $11.76 Billion in 2018, up a steady 5% from 2017. A small sub sector of that entire market, but one which will grow at a faster rate of 12% from 2017 to 2018, is the market for RFID sensors.
Printed Electronics World
Oct 26, 2017
IDTechEx TVTransparent solar technology represents wave of the future

Transparent solar technology represents wave of the future

See-through solar materials that can be applied to windows represent a massive source of untapped energy and could harvest as much power as bigger, bulkier rooftop solar units, scientists report.
Printed Electronics World
Oct 25, 2017
More Money Raised for Printed and Organic Electronics: The Rationale

More Money Raised for Printed and Organic Electronics: The Rationale

Excitement is building in the printed and organic electronics sector as demand grows and investors focus in on the opportunities.
Printed Electronics World
Oct 25, 2017
Spotlight on First Graphite

Spotlight on First Graphite

First Graphite has clearly demonstrated it is now one of the lowest cost, highest quality, jumbo platelet size graphene producers in the world with feedstock carbon grades four times higher than the nearest competitor.
Printed Electronics World
Nov 1, 2017
Who Wants Printed Electronics: Drivers by Industry

Who Wants Printed Electronics: Drivers by Industry

This article raises the problems faced in five industries, driving the organizations involved to look at printed electronics solutions.
Printed Electronics World
Nov 1, 2017
Harness the Power of High Dispersion Technology - Cavitation

Harness the Power of High Dispersion Technology - Cavitation

ACI Materials offers high performance functional inks for Flexible Hybrid Electronics and Wearable applications.
Printed Electronics World
Oct 31, 2017
Piezoelectrics stretch their potential

Piezoelectrics stretch their potential

Thin-film piezoelectrics, with dimensions on the scale of micrometers or smaller, offer potential for new applications where smaller dimensions or a lower voltage operation are required.
Printed Electronics World
Oct 30, 2017
Research yields significant thermoelectric performance

Research yields significant thermoelectric performance

Scientists reported significant advances in the thermoelectric performance of organic semiconductors based on carbon nanotube thin films that could be integrated into fabrics to convert waste heat into electricity or serve as a small power source.
Printed Electronics World
Oct 27, 2017
IDTechEx TVBy 2027 the biosensor market worldwide will be worth 33 billion

By 2027 the biosensor market worldwide will be worth 33 billion

What is a point-of-care device? Dr David Pugh and Dr Laura Baers discuss how biosensors are changing the ways that diseases are diagnosed.
Printed Electronics World
Oct 27, 2017
Nanotube fiber antennas as capable as copper

Nanotube fiber antennas as capable as copper

Fibers made of carbon nanotubes configured as wireless antennas can be as good as copper antennas but 20 times lighter, according to researchers. The antennas may offer practical advantages for aerospace applications and wearable electronics where weight and flexibility are factors.
Printed Electronics World
Oct 26, 2017
NASCAR, JCDecaux, Galvani and Terrafugia to open the IDTechEx Show!

NASCAR, JCDecaux, Galvani and Terrafugia to open the IDTechEx Show!

Opening the IDTechEx Show! in Santa Clara, Nov 15-16, are four select Cornerstone presentations which will showcase how new technologies are coming to market which solve big problems created by changing demographics and global megatrends, from mobility to healthcare to enabling the ubiquity of electronics.
Printed Electronics World
Oct 26, 2017
Drone delivery: publicity stunt or game changer in instant fulfilment?

Drone delivery: publicity stunt or game changer in instant fulfilment?

The idea of drone delivery sharply divides commentator opinion: some dismiss it as a mere publicity stunt whilst others consider it a game changer that will bring near instant product fulfilment to e-commerce, stripping traditional shops of their last major differentiator.
Printed Electronics World
Oct 26, 2017
Passive RFID Sensors Overtake Battery Assisted RFID Sensors

Passive RFID Sensors Overtake Battery Assisted RFID Sensors

IDTechEx Research assesses that the entire RFID market will be worth $11.76 Billion in 2018, up a steady 5% from 2017. A small sub sector of that entire market, but one which will grow at a faster rate of 12% from 2017 to 2018, is the market for RFID sensors.
Printed Electronics World
Oct 25, 2017
More Money Raised for Printed and Organic Electronics: The Rationale

More Money Raised for Printed and Organic Electronics: The Rationale

Excitement is building in the printed and organic electronics sector as demand grows and investors focus in on the opportunities.
Printed Electronics World
Nov 1, 2017
Spotlight on Graphene Solutions, LLC

Spotlight on Graphene Solutions, LLC

Commercializing research and development using graphene and carbon nanotube technologies
Printed Electronics World
Oct 31, 2017
Research breaks new ground in memory technology

Research breaks new ground in memory technology

An international research team pioneered the development of a novel thin, organic film that supports a million more times read-write cycles and consumes 1,000 times less power than commercial flash memories.
Printed Electronics World
Oct 30, 2017
IDTechEx TVAn overview of the IDTechEx Show! USA

An overview of the IDTechEx Show! USA

Raghu Das, CEO and Chris Clare, Event Director, IDTechEx tells you what to expect at the upcoming IDTechEx Show! held at the Santa Clara Convention Center, November 15-16 2017.
Printed Electronics World
Oct 30, 2017
Hybrid 3-D printing method for flexible electronics

Hybrid 3-D printing method for flexible electronics

A collaboration between scientists has resulted in a new method for digital design and printing of stretchable, flexible electronics. The process, called Hybrid 3-D printing, uses additive manufacturing to integrate soft, conductive inks with a material substrate to create stretchable, wearable electronic devices.
IDTechEx Research Subscribers
Key Takeaways from Composites in the Marine Sector Conference

Key Takeaways from Composites in the Marine Sector Conference

Fibre reinforced polymers (FRP), more often commonly referred to simply as composites, give excellent strength and stiffness to weight ratios along with other beneficial properties. The main reason for their exploitation is for lightweighting, which has resulted in them being used in nearly every sport and transportation industry. Marine is no exception to this trend
IDTechEx Research Subscribers
Printing Electronics: Highlights of Some New Manufacturing Advances

Printing Electronics: Highlights of Some New Manufacturing Advances

In this subscriber-only content IDTechEx highlights some of the latest developments in printing and manufacturing processes for electronics.
Printed Electronics World
Oct 26, 2017
IDTechEx TVInnovative material for soft sensor could bring new tactile tech

Innovative material for soft sensor could bring new tactile tech

A new type of soft and stretchable sensor could find uses in applications ranging from athletics and health monitoring to prosthetics and virtual reality.
Printed Electronics World
Oct 26, 2017
ITO and its alternatives: the next major growth phase will come?

ITO and its alternatives: the next major growth phase will come?

ITO and ITO alternative have, in recent years, faced challenging market conditions. Sluggish growth, together with increased supply and the threat of substitutes, led to price falls, even price wars, forcing an industry consolidation.
Printed Electronics World
Oct 26, 2017
IDTechEx TVTransparent solar technology represents wave of the future

Transparent solar technology represents wave of the future

See-through solar materials that can be applied to windows represent a massive source of untapped energy and could harvest as much power as bigger, bulkier rooftop solar units, scientists report.
Printed Electronics World
Oct 25, 2017
Spotlight on First Graphite

Spotlight on First Graphite

First Graphite has clearly demonstrated it is now one of the lowest cost, highest quality, jumbo platelet size graphene producers in the world with feedstock carbon grades four times higher than the nearest competitor.