Hosted by IDTechEx
HomeApplicationsTechnologyEventsReportsTVAdvertiseCareersAbout UsIDTechExTwitterFacebookLinkedInYoutubeRSSForward To Friend
Press Release
3D Printer for electronics purchased by NTU Singapore

3D Printer for electronics purchased by NTU Singapore

Nano Dimension Ltd announced that Nanyang Technological University, Singapore has purchased the company's DragonFly 2020 Pro 3D Printer for electronics development.
Press Release
Printed solar cell workshop at infinityPV

Printed solar cell workshop at infinityPV

infinityPV are opening the doors for printed solar cells through a series of workshops.
Printed Electronics World
Jan 30, 2018
Key Themes at CES 2018

Key Themes at CES 2018

A number of IDTechEx analysts attended CES 2018, exploring the key themes prevalent in a variety of sectors, including: healthcare, neuroscience, 3D printing, e-textiles, haptics and electric vehicles.
IDTechEx Research Subscribers
Neuroscience Themes from CES 2018

Neuroscience Themes from CES 2018

At CES this year there were multiple examples of products that had incorporated aspects of neuroscience that were central to their development or use, IDTechEx analysts Dr Alexis Karandrea and Mr James Hayward report on their findings.
Printed Electronics World
Jan 30, 2018
Graphene girders could double the life of lithium batteries

Graphene girders could double the life of lithium batteries

New research has found an effective approach to replacing graphite in the anodes of lithium-ion batteries using silicon, by reinforcing the anode's structure with graphene girders. This could more than double the life of rechargeable lithium-ion based batteries and also increase the capacity delivered by those batteries.
Printed Electronics World
Jan 30, 2018
Proton transport in graphene shows promise for renewable energy

Proton transport in graphene shows promise for renewable energy

Researchers have discovered another new and unexpected physical effect in graphene - membranes that could be used in devices to artificially mimic photosynthesis.
IDTechEx Research Subscribers
Emerging Technology at CES 2018

Emerging Technology at CES 2018

IDTechEx has attended CES 2018. This article will show the highlights in various emerging technologies.
Printed Electronics World
Jan 29, 2018
Flexible, water-repellent graphene circuits for washable electronics

Flexible, water-repellent graphene circuits for washable electronics

New graphene printing technology can produce electronic circuits that are low-cost, flexible, highly conductive and water repellent.
IDTechEx Research Subscribers
Haptics at CES 2018

Haptics at CES 2018

Major themes from the show illustrated through 11 company interviews with leading players.
Printed Electronics World
Jan 26, 2018
Research team develops electronic skin

Research team develops electronic skin

At first glance, the shiny little gold elements look like a modern tattoo. But on this extremely thin, almost invisible foil that sticks to the palm of the hand like a second skin, there are sensors which provide people with a "sixth sense" for magnetic fields.
IDTechEx Research Subscribers
3D Printing at CES 2018

3D Printing at CES 2018

IDTechEx analyst Dr Bryony Core reports on her findings on 3D Printing at CES 2018.
Printed Electronics World
Jan 25, 2018
Using crumpled graphene balls to make better batteries

Using crumpled graphene balls to make better batteries

Lithium metal-based batteries have the potential to turn the battery industry upside down. With the theoretically ultra-high capacity of lithium metal used by itself, this new type of battery could power everything from personal devices to cars.
Printed Electronics World
Jan 24, 2018
ITO and its alternatives: major decisions loom large

ITO and its alternatives: major decisions loom large

These coming quarters are crucial decision times for many transparent conductive film (TCF) companies. Some are losing patience with their programmes, questioning if and when their efforts will turn into notable revenues.
Printed Electronics World
Jan 24, 2018
Ynvisible's reverse takeover completed

Ynvisible's reverse takeover completed

Ynvisible Interactive Inc is pleased to announce the completion of its previously announced transaction with YD Ynvisible SA whereby the Company has acquired 94.19% of the issued and outstanding common shares of Ynvisible, which acquisition constitutes a reverse takeover transaction.
Printed Electronics World
Jan 24, 2018
Innovative heat technology for Team USA 2018 Olympic parade uniforms

Innovative heat technology for Team USA 2018 Olympic parade uniforms

Ralph Lauren and the United States Olympic Committee have unveiled the opening ceremony parade uniforms for the 2018 US Olympic and Paralympic Teams, introducing a unique wearable heat concept, seamlessly integrating fashion and the latest in apparel innovation.
Printed Electronics World
Jan 23, 2018
Perovskite solar cell application in office buildings

Perovskite solar cell application in office buildings

Skanska's commercial development business unit in Central Eastern Europe will be the first developer worldwide to cover office buildings with semi-transparent perovskite solar cells on a commercial scale.
Printed Electronics World
Jan 22, 2018
Biodegradable sensor monitors pressure in the body then disappears

Biodegradable sensor monitors pressure in the body then disappears

Engineers have created a biodegradable pressure sensor that could help doctors monitor chronic lung disease, swelling of the brain, and other medical conditions before dissolving harmlessly in a patient's body.
Press Release
Asian Nanotechnology Breakthrough

Asian Nanotechnology Breakthrough

CERADROP, a MGI Group company, has supplied the Institute for Nanotechnology (INT), Vietnam National University - Ho Chi Minh City (VNUHCM) with one of its TurnKey Materials Deposition Inkjet Platform - CeraPrinter X-Serie.
Printed Electronics World
Jan 19, 2018
The biocomposite market cannot grow fast enough

The biocomposite market cannot grow fast enough

Fibre reinforced polymers (FRPs) are predominantly made of synthetic fibres, such as glass or carbon, and a petrochemically sourced thermosetting resin or thermoplastic matrix. However, natural fibres and resins are on the rise because of their beneficial properties, competitive cost, legislative drivers, and consumer preferences.
Printed Electronics World
Jan 19, 2018
Potentially life-saving health monitor

Potentially life-saving health monitor

Sick babies in remote parts of the world could be monitored from afar, thanks to new wearable technology.
Press Release
3D Printer for electronics purchased by NTU Singapore

3D Printer for electronics purchased by NTU Singapore

Nano Dimension Ltd announced that Nanyang Technological University, Singapore has purchased the company's DragonFly 2020 Pro 3D Printer for electronics development.
Printed Electronics World
Jan 30, 2018
Key Themes at CES 2018

Key Themes at CES 2018

A number of IDTechEx analysts attended CES 2018, exploring the key themes prevalent in a variety of sectors, including: healthcare, neuroscience, 3D printing, e-textiles, haptics and electric vehicles.
Printed Electronics World
Jan 30, 2018
Graphene girders could double the life of lithium batteries

Graphene girders could double the life of lithium batteries

New research has found an effective approach to replacing graphite in the anodes of lithium-ion batteries using silicon, by reinforcing the anode's structure with graphene girders. This could more than double the life of rechargeable lithium-ion based batteries and also increase the capacity delivered by those batteries.
IDTechEx Research Subscribers
Emerging Technology at CES 2018

Emerging Technology at CES 2018

IDTechEx has attended CES 2018. This article will show the highlights in various emerging technologies.
IDTechEx Research Subscribers
Haptics at CES 2018

Haptics at CES 2018

Major themes from the show illustrated through 11 company interviews with leading players.
IDTechEx Research Subscribers
3D Printing at CES 2018

3D Printing at CES 2018

IDTechEx analyst Dr Bryony Core reports on her findings on 3D Printing at CES 2018.
Printed Electronics World
Jan 24, 2018
ITO and its alternatives: major decisions loom large

ITO and its alternatives: major decisions loom large

These coming quarters are crucial decision times for many transparent conductive film (TCF) companies. Some are losing patience with their programmes, questioning if and when their efforts will turn into notable revenues.
Printed Electronics World
Jan 24, 2018
Innovative heat technology for Team USA 2018 Olympic parade uniforms

Innovative heat technology for Team USA 2018 Olympic parade uniforms

Ralph Lauren and the United States Olympic Committee have unveiled the opening ceremony parade uniforms for the 2018 US Olympic and Paralympic Teams, introducing a unique wearable heat concept, seamlessly integrating fashion and the latest in apparel innovation.
Printed Electronics World
Jan 22, 2018
Biodegradable sensor monitors pressure in the body then disappears

Biodegradable sensor monitors pressure in the body then disappears

Engineers have created a biodegradable pressure sensor that could help doctors monitor chronic lung disease, swelling of the brain, and other medical conditions before dissolving harmlessly in a patient's body.
Printed Electronics World
Jan 19, 2018
The biocomposite market cannot grow fast enough

The biocomposite market cannot grow fast enough

Fibre reinforced polymers (FRPs) are predominantly made of synthetic fibres, such as glass or carbon, and a petrochemically sourced thermosetting resin or thermoplastic matrix. However, natural fibres and resins are on the rise because of their beneficial properties, competitive cost, legislative drivers, and consumer preferences.
Press Release
Printed solar cell workshop at infinityPV

Printed solar cell workshop at infinityPV

infinityPV are opening the doors for printed solar cells through a series of workshops.
IDTechEx Research Subscribers
Neuroscience Themes from CES 2018

Neuroscience Themes from CES 2018

At CES this year there were multiple examples of products that had incorporated aspects of neuroscience that were central to their development or use, IDTechEx analysts Dr Alexis Karandrea and Mr James Hayward report on their findings.
Printed Electronics World
Jan 30, 2018
Proton transport in graphene shows promise for renewable energy

Proton transport in graphene shows promise for renewable energy

Researchers have discovered another new and unexpected physical effect in graphene - membranes that could be used in devices to artificially mimic photosynthesis.
Printed Electronics World
Jan 29, 2018
Flexible, water-repellent graphene circuits for washable electronics

Flexible, water-repellent graphene circuits for washable electronics

New graphene printing technology can produce electronic circuits that are low-cost, flexible, highly conductive and water repellent.
Printed Electronics World
Jan 26, 2018
Research team develops electronic skin

Research team develops electronic skin

At first glance, the shiny little gold elements look like a modern tattoo. But on this extremely thin, almost invisible foil that sticks to the palm of the hand like a second skin, there are sensors which provide people with a "sixth sense" for magnetic fields.
Printed Electronics World
Jan 25, 2018
Using crumpled graphene balls to make better batteries

Using crumpled graphene balls to make better batteries

Lithium metal-based batteries have the potential to turn the battery industry upside down. With the theoretically ultra-high capacity of lithium metal used by itself, this new type of battery could power everything from personal devices to cars.
Printed Electronics World
Jan 24, 2018
Ynvisible's reverse takeover completed

Ynvisible's reverse takeover completed

Ynvisible Interactive Inc is pleased to announce the completion of its previously announced transaction with YD Ynvisible SA whereby the Company has acquired 94.19% of the issued and outstanding common shares of Ynvisible, which acquisition constitutes a reverse takeover transaction.
Printed Electronics World
Jan 23, 2018
Perovskite solar cell application in office buildings

Perovskite solar cell application in office buildings

Skanska's commercial development business unit in Central Eastern Europe will be the first developer worldwide to cover office buildings with semi-transparent perovskite solar cells on a commercial scale.
Press Release
Asian Nanotechnology Breakthrough

Asian Nanotechnology Breakthrough

CERADROP, a MGI Group company, has supplied the Institute for Nanotechnology (INT), Vietnam National University - Ho Chi Minh City (VNUHCM) with one of its TurnKey Materials Deposition Inkjet Platform - CeraPrinter X-Serie.
Printed Electronics World
Jan 19, 2018
Potentially life-saving health monitor

Potentially life-saving health monitor

Sick babies in remote parts of the world could be monitored from afar, thanks to new wearable technology.