Hosted by IDTechEx
Printed Electronics World
Jun 25, 2018
Chip upgrade helps miniature drones navigate

Chip upgrade helps miniature drones navigate

Researchers at MIT, who last year designed a tiny computer chip tailored to help honeybee-sized drones navigate, have now shrunk their chip design even further, in both size and power consumption.
Printed Electronics World
Jun 23, 2018
Bridging the gap between traditional and printed electronics

Bridging the gap between traditional and printed electronics

The Voltera V-One is a PCB Printer for early circuit board prototyping and PE experimentation.
Printed Electronics World
Jun 22, 2018
Crumple up this keyboard and stick it in your pocket

Crumple up this keyboard and stick it in your pocket

Bendable portable keyboards for use with computers and other electronic devices are already on the market, but they have limited flexibility, and they're fairly sizable when rolled up for transport. Now researchers have crafted an inexpensive keyboard that is so tough, flexible and thin that it can be crumpled up and tucked in a pocket without damaging it.
IDTechEx Research Subscribers
QD display updates at SID 2018: Cd-free compositions and quantum rods

QD display updates at SID 2018: Cd-free compositions and quantum rods

In this article we provide a detailed review of the latest progress in quantum dot (QD) technology reported at the SID conference in California, USA.
Printed Electronics World
Jun 21, 2018
The Leading Edge Academic Poster Display: Present your work

The Leading Edge Academic Poster Display: Present your work

Printed Electronics USA 2018 is the largest gathering of industry executives who are involved in R&D, business development and product management, in addition to those seeking to use the technology. Held on November 14 & 15, 2018 in Santa Clara, CA, the event features limited poster space for leading academic research work to be displayed to all attendees.
Printed Electronics World
Jun 21, 2018
This is what a stretchy circuit looks like

This is what a stretchy circuit looks like

Researchers have made a new hybrid conductive material--part elastic polymer, part liquid metal--that can be bent and stretched at will. Circuits made with this material can take most two-dimensional shapes and are also non-toxic.
Printed Electronics World
Jun 20, 2018
In-mold electronics become commercial once again

In-mold electronics become commercial once again

Conductive inks are a wonderfully adaptive technology. This characteristic has enabled them to stay relevant and to rejuvenate themselves over the past several decades. This is because as old markets have struggled or declined the technology has managed to find and/or create new uses. Several years ago, a new frontier called in-mold electronics (or IME) started to emerge. This frontier, as reported in the IDTechEx Research report Conductive Ink Markets 2018-2028: Forecasts, Technologies, Players, is once again becoming commercial.
Printed Electronics World
Jun 20, 2018
Next generation equipment for additive manufacturing

Next generation equipment for additive manufacturing

The AMSYSTEMS Center is a joint innovation center of TNO and the High Tech Systems Center of Eindhoven University of Technology (TU/e HTSC) to accelerate (new ways of) additive manufacturing in diverse industries.
Printed Electronics World
Jun 20, 2018
Webinar Thursday 12 July - Gas Sensors for Internet of Things

Webinar Thursday 12 July - Gas Sensors for Internet of Things

IDTechEx will be hosting a free webinar on Thursday 12 July titled Gas Sensors for Internet of Things.
IDTechEx Research Subscribers
Transparent Conductive Films: major technology and commercial trends

Transparent Conductive Films: major technology and commercial trends

This article analyses the major technological and commercial trends that shape the past, present and future of transparent conductive film technology.
Printed Electronics World
Jun 19, 2018
Making quantum puddles

Making quantum puddles

A team of physicists have discovered a fundamentally new way surfaces can get wet. Their study may allow scientists to create the thinnest films of liquid ever made—and engineer a new class of surface coatings and lubricants just a few atoms thick.
External Company Press Release
Varitron joins intelliFLEX

Varitron joins intelliFLEX

The intelliFLEX Innovation Alliance announced that Varitron Technologies is joining its eco-system and making a substantial investment to develop its capabilities in flexible and hybrid electronics.
External Company Press Release
Directed Energy Deposition to be 10x faster and 5x less expensive

Directed Energy Deposition to be 10x faster and 5x less expensive

Optomec Report shows directed energy deposition to be 10x faster and 5x less expensive than power bed fusion for building mid-size metal parts.
Printed Electronics World
Jun 19, 2018
New sensors open door to wearable medical diagnostic device

New sensors open door to wearable medical diagnostic device

Scientists from ANU have designed tiny optical sensors that open the door to developing a wearable device that allows doctors to medically diagnose people's health in real time.
Printed Electronics World
Jun 18, 2018
Stratasys spin outs come out of stealth mode

Stratasys spin outs come out of stealth mode

2018 has been the year of major new announcements at Stratasys. Not only have they announced that they are developing two new technologies, but they are doing so through the launch of two start-ups and are venturing into the lucrative metal 3D printing ecosystem in the process
Printed Electronics World
Jun 18, 2018
E-textiles control home appliances with the swipe of a finger

E-textiles control home appliances with the swipe of a finger

Electronic textiles could allow a person to control household appliances or computers from a distance simply by touching a wristband or other item of clothing — something that could be particularly helpful for those with limited mobility. Now researchers have developed a new type of e-textile that is self-powered, highly sensitive and washable.
Printed Electronics World
Jun 15, 2018
Versarien agrees deal for graphene inks

Versarien agrees deal for graphene inks

Shares in materials engineer Versarien have jumped after a wide-ranging agreement was made over graphene-based inks and a new 'Graphinks' product range was launched.
IDTechEx Research Subscribers
Flexible and/or printed OLED displays: updates from SID 2018

Flexible and/or printed OLED displays: updates from SID 2018

In this article, we will discuss the latest prototypes and developments showcased during the event. We will focus on two trends: flexible and rollable OLED displays, and printed OLED displays.
Printed Electronics World
Jun 14, 2018
Fiber Lasers Outshine Competing Laser and Non-Laser Technologies

Fiber Lasers Outshine Competing Laser and Non-Laser Technologies

In the recently published IDTechEx market report titled Fiber Lasers 2018-2028: Technologies, Opportunities, Markets & Forecasts, Dr Nilushi Wijeyasinghe explores how recent fiber laser technology developments affect the growth of key market segments.
Printed Electronics World
Jun 14, 2018
Organic light-emitting diodes become brighter and more durable

Organic light-emitting diodes become brighter and more durable

Researchers demonstrate the possibility of using ultrastable film formation to improve the performance of state-of-the-art OLEDs.
Printed Electronics World
Jun 25, 2018
Chip upgrade helps miniature drones navigate

Chip upgrade helps miniature drones navigate

Researchers at MIT, who last year designed a tiny computer chip tailored to help honeybee-sized drones navigate, have now shrunk their chip design even further, in both size and power consumption.
Printed Electronics World
Jun 22, 2018
Crumple up this keyboard and stick it in your pocket

Crumple up this keyboard and stick it in your pocket

Bendable portable keyboards for use with computers and other electronic devices are already on the market, but they have limited flexibility, and they're fairly sizable when rolled up for transport. Now researchers have crafted an inexpensive keyboard that is so tough, flexible and thin that it can be crumpled up and tucked in a pocket without damaging it.
Printed Electronics World
Jun 21, 2018
The Leading Edge Academic Poster Display: Present your work

The Leading Edge Academic Poster Display: Present your work

Printed Electronics USA 2018 is the largest gathering of industry executives who are involved in R&D, business development and product management, in addition to those seeking to use the technology. Held on November 14 & 15, 2018 in Santa Clara, CA, the event features limited poster space for leading academic research work to be displayed to all attendees.
Printed Electronics World
Jun 20, 2018
In-mold electronics become commercial once again

In-mold electronics become commercial once again

Conductive inks are a wonderfully adaptive technology. This characteristic has enabled them to stay relevant and to rejuvenate themselves over the past several decades. This is because as old markets have struggled or declined the technology has managed to find and/or create new uses. Several years ago, a new frontier called in-mold electronics (or IME) started to emerge. This frontier, as reported in the IDTechEx Research report Conductive Ink Markets 2018-2028: Forecasts, Technologies, Players, is once again becoming commercial.
Printed Electronics World
Jun 20, 2018
Webinar Thursday 12 July - Gas Sensors for Internet of Things

Webinar Thursday 12 July - Gas Sensors for Internet of Things

IDTechEx will be hosting a free webinar on Thursday 12 July titled Gas Sensors for Internet of Things.
Printed Electronics World
Jun 19, 2018
Making quantum puddles

Making quantum puddles

A team of physicists have discovered a fundamentally new way surfaces can get wet. Their study may allow scientists to create the thinnest films of liquid ever made—and engineer a new class of surface coatings and lubricants just a few atoms thick.
External Company Press Release
Directed Energy Deposition to be 10x faster and 5x less expensive

Directed Energy Deposition to be 10x faster and 5x less expensive

Optomec Report shows directed energy deposition to be 10x faster and 5x less expensive than power bed fusion for building mid-size metal parts.
Printed Electronics World
Jun 18, 2018
Stratasys spin outs come out of stealth mode

Stratasys spin outs come out of stealth mode

2018 has been the year of major new announcements at Stratasys. Not only have they announced that they are developing two new technologies, but they are doing so through the launch of two start-ups and are venturing into the lucrative metal 3D printing ecosystem in the process
Printed Electronics World
Jun 15, 2018
Versarien agrees deal for graphene inks

Versarien agrees deal for graphene inks

Shares in materials engineer Versarien have jumped after a wide-ranging agreement was made over graphene-based inks and a new 'Graphinks' product range was launched.
Printed Electronics World
Jun 14, 2018
Fiber Lasers Outshine Competing Laser and Non-Laser Technologies

Fiber Lasers Outshine Competing Laser and Non-Laser Technologies

In the recently published IDTechEx market report titled Fiber Lasers 2018-2028: Technologies, Opportunities, Markets & Forecasts, Dr Nilushi Wijeyasinghe explores how recent fiber laser technology developments affect the growth of key market segments.
Printed Electronics World
Jun 23, 2018
Bridging the gap between traditional and printed electronics

Bridging the gap between traditional and printed electronics

The Voltera V-One is a PCB Printer for early circuit board prototyping and PE experimentation.
IDTechEx Research Subscribers
QD display updates at SID 2018: Cd-free compositions and quantum rods

QD display updates at SID 2018: Cd-free compositions and quantum rods

In this article we provide a detailed review of the latest progress in quantum dot (QD) technology reported at the SID conference in California, USA.
Printed Electronics World
Jun 21, 2018
This is what a stretchy circuit looks like

This is what a stretchy circuit looks like

Researchers have made a new hybrid conductive material--part elastic polymer, part liquid metal--that can be bent and stretched at will. Circuits made with this material can take most two-dimensional shapes and are also non-toxic.
Printed Electronics World
Jun 20, 2018
Next generation equipment for additive manufacturing

Next generation equipment for additive manufacturing

The AMSYSTEMS Center is a joint innovation center of TNO and the High Tech Systems Center of Eindhoven University of Technology (TU/e HTSC) to accelerate (new ways of) additive manufacturing in diverse industries.
IDTechEx Research Subscribers
Transparent Conductive Films: major technology and commercial trends

Transparent Conductive Films: major technology and commercial trends

This article analyses the major technological and commercial trends that shape the past, present and future of transparent conductive film technology.
External Company Press Release
Varitron joins intelliFLEX

Varitron joins intelliFLEX

The intelliFLEX Innovation Alliance announced that Varitron Technologies is joining its eco-system and making a substantial investment to develop its capabilities in flexible and hybrid electronics.
Printed Electronics World
Jun 19, 2018
New sensors open door to wearable medical diagnostic device

New sensors open door to wearable medical diagnostic device

Scientists from ANU have designed tiny optical sensors that open the door to developing a wearable device that allows doctors to medically diagnose people's health in real time.
Printed Electronics World
Jun 18, 2018
E-textiles control home appliances with the swipe of a finger

E-textiles control home appliances with the swipe of a finger

Electronic textiles could allow a person to control household appliances or computers from a distance simply by touching a wristband or other item of clothing — something that could be particularly helpful for those with limited mobility. Now researchers have developed a new type of e-textile that is self-powered, highly sensitive and washable.
IDTechEx Research Subscribers
Flexible and/or printed OLED displays: updates from SID 2018

Flexible and/or printed OLED displays: updates from SID 2018

In this article, we will discuss the latest prototypes and developments showcased during the event. We will focus on two trends: flexible and rollable OLED displays, and printed OLED displays.
Printed Electronics World
Jun 14, 2018
Organic light-emitting diodes become brighter and more durable

Organic light-emitting diodes become brighter and more durable

Researchers demonstrate the possibility of using ultrastable film formation to improve the performance of state-of-the-art OLEDs.
More IDTechEx Journals