Hosted by IDTechEx
HomeApplicationsTechnologyWebinarsEventsReportsTVAdvertiseCareersAbout UsIDTechExTwitterFacebookLinkedInYoutubeRSSForward To Friend
Printed Electronics World
Feb 28, 2019
Thin-film solar application for the oil industry

Thin-film solar application for the oil industry

The thin-film panels, unique in that they can be directly applied to flat surfaces, are significantly more flexible and lighter in weight than traditional panels, which also require the additional weight of racks and bolts for installation.
Press Release
LasX invests in growth with Mike Riley joining as COO

LasX invests in growth with Mike Riley joining as COO

Mike Riley, a seasoned leader in manufacturing and distribution, joins LasX as the new COO.
Printed Electronics World
Feb 28, 2019
IDTechEx TVAerosol-based additive manufacturing technology

Aerosol-based additive manufacturing technology

Integrated Deposition Solutions discuss their aerosol-based technology: Nanojet
Printed Electronics World
Feb 27, 2019
Printing OLED displays: has its time finally come?

Printing OLED displays: has its time finally come?

Solution processed light emitting organic materials were demonstrated in 1989 with a tiny 0.1 EQE (external quantum efficiency). Since then there has been tremendous progress on material synthesis/production as well as on display processing. However, thus far, commercialization has remained elusive. In this article we will argue that the page may be about to turn.
Press Release
CLEARink And Tianma Announce MoU

CLEARink And Tianma Announce MoU

Tianma, the leader in electronic display manufacturing, and CLEARink Displays, the leader in next generation ePaper, announced today that the companies have signed a Memorandum of Understanding to establish a partnership framework for developing CLEARink's patented ePaper 2.0 displays.
Printed Electronics World
Feb 27, 2019
IDTechEx TVStructural health monitoring using piezoelectric sensors

Structural health monitoring using piezoelectric sensors

Acellent provides real-time data from around the world, which makes for smarter structures and a safer world.
Printed Electronics World
Feb 26, 2019
Why isn't the aerogel industry booming?

Why isn't the aerogel industry booming?

Aerogels are a class of advanced porous materials with a huge amount of potential. However, despite being discovered back in the 1930s, this potential has never turned to a booming commercial reality. Since the turn of the century there has been significant growth, but the industry has once again stalled before greater growth.
Printed Electronics World
Feb 26, 2019
Improving stability and optical properties of perovskite films

Improving stability and optical properties of perovskite films

Metal halide perovskites are regarded as next generation materials for light emitting devices. A recent joint-research has developed a new and efficient fabrication approach to produce all-inorganic perovskite films with better optical properties and stability, enabling the development of high colour-purity and low-cost perovskite LEDs with a high operational lifetime.
IDTechEx Research Subscribers

Quantum computing: from the qubit to a commercial reality

Quantum computers have been a dream for over 40 years, which comes from harnessing the laws of quantum physics to process information. IDTechEx technology analyst Dr Luyun Jiang explores the future possibilities of this technology, based on her findings at CES 2019.
Printed Electronics World
Feb 25, 2019
Breakthrough in the search for graphene-based electronics

Breakthrough in the search for graphene-based electronics

For 15 years, scientists have tried to exploit the "miracle material" graphene to produce nanoscale electronics. On paper, graphene should be great for just that: it is ultra-thin - only one atom thick in fact and therefore two-dimensional, it is excellent for conducting electrical current and should be ideal for future forms of electronics that are faster and more energy efficient.
Printed Electronics World
Feb 25, 2019
Solar powered super capacitors for flexible wearables

Solar powered super capacitors for flexible wearables

A breakthrough in energy storage technology could bring a new generation of flexible electronic devices to life, including solar-powered prosthetics for amputees.
Printed Electronics World
Feb 25, 2019
IDTechEx TVNano-carbon material technology for energy storage applications

Nano-carbon material technology for energy storage applications

Nano-carbons have exceptional electrical, thermal and mechanical properties at the nano-scale level.
Printed Electronics World
Feb 22, 2019
IDTechEx TVGraphene thermal conductive film for electronic devices

Graphene thermal conductive film for electronic devices

Topsen Technology represents the Sixth Element Material Technology and Toppen Technology, a world leading graphene manufacturer and pioneer in graphene's applications, in North America.
Printed Electronics World
Feb 22, 2019
'GO dough' makes graphene easy to shape and mold

'GO dough' makes graphene easy to shape and mold

A university team has turned graphene oxide into a soft, moldable and kneadable play dough that can be shaped and reshaped into free-standing, three-dimensional structures. The malleable material solves several long-standing — and sometimes explosive — problems in the graphene manufacturing industry.
Printed Electronics World
Feb 21, 2019
Charting a path to cheaper flexible solar cells

Charting a path to cheaper flexible solar cells

There's a lot to like about perovskite-based solar cells. They are simple and cheap to produce, offer flexibility that could unlock a wide new range of installation methods and places, and in recent years have reached energy efficiencies approaching those of traditional silicon-based cells. But figuring out how to produce perovskite-based energy devices that last longer than a couple of months has been a challenge.
Press Release
Automotive Interiors Project in Printed, In-Mold Electronics

Automotive Interiors Project in Printed, In-Mold Electronics

Today, Geely Design, CEVT and TactoTek® jointly announced that they have initiated projects to develop smart surfaces for multiple automotive brands owned by CEVT's parent company, Zhejiang Geely Holding Group. The current interiors project is the first of several anticipated by the framework agreement between the companies.
Printed Electronics World
Feb 20, 2019
13th Edition of Graphene B2B Conference Approaches

13th Edition of Graphene B2B Conference Approaches

Like many advanced materials, there is a significant learning curve to progress promising lab results to real commercial products. This includes a learning experience from the manufacturer, for cost-effective high-volume production, and a learning experience for the end-user, to establish the value and utilisation of this market entry. IDTechEx have been following this market throughout this learning experience, and the 13th edition of their…
Printed Electronics World
Feb 20, 2019
Quantum dots: technology evolution display, lighting, sensor material

Quantum dots: technology evolution display, lighting, sensor material

Quantum dots are a commercial success for nanotechnology. They are already used in display applications. In this article, we discuss multiple innovation and commercialization frontiers of this technology.
Press Release
CPI collaborates on smart filter project

CPI collaborates on smart filter project

The Centre for Process Innovation has collaborated on a project to advance the development of a low-cost, self-cleaning coating technology for industrial filter membranes. The Smart Filter project used graphene and its derivatives to create a coated filter membrane that offers increased resistance to fouling for industrial waste water treatment.
Printed Electronics World
Feb 20, 2019
Sustainable electronics manufacturing breakthrough

Sustainable electronics manufacturing breakthrough

Researchers are developing an eco-friendly, 3D printable solution for producing wireless Internet-of-Things (IoT) sensors that can be used and disposed of without contaminating the environment.
Printed Electronics World
Feb 28, 2019
Thin-film solar application for the oil industry

Thin-film solar application for the oil industry

The thin-film panels, unique in that they can be directly applied to flat surfaces, are significantly more flexible and lighter in weight than traditional panels, which also require the additional weight of racks and bolts for installation.
Printed Electronics World
Feb 28, 2019
IDTechEx TVAerosol-based additive manufacturing technology

Aerosol-based additive manufacturing technology

Integrated Deposition Solutions discuss their aerosol-based technology: Nanojet
Press Release
CLEARink And Tianma Announce MoU

CLEARink And Tianma Announce MoU

Tianma, the leader in electronic display manufacturing, and CLEARink Displays, the leader in next generation ePaper, announced today that the companies have signed a Memorandum of Understanding to establish a partnership framework for developing CLEARink's patented ePaper 2.0 displays.
Printed Electronics World
Feb 26, 2019
Why isn't the aerogel industry booming?

Why isn't the aerogel industry booming?

Aerogels are a class of advanced porous materials with a huge amount of potential. However, despite being discovered back in the 1930s, this potential has never turned to a booming commercial reality. Since the turn of the century there has been significant growth, but the industry has once again stalled before greater growth.
IDTechEx Research Subscribers

Quantum computing: from the qubit to a commercial reality

Quantum computers have been a dream for over 40 years, which comes from harnessing the laws of quantum physics to process information. IDTechEx technology analyst Dr Luyun Jiang explores the future possibilities of this technology, based on her findings at CES 2019.
Printed Electronics World
Feb 25, 2019
Solar powered super capacitors for flexible wearables

Solar powered super capacitors for flexible wearables

A breakthrough in energy storage technology could bring a new generation of flexible electronic devices to life, including solar-powered prosthetics for amputees.
Printed Electronics World
Feb 22, 2019
IDTechEx TVGraphene thermal conductive film for electronic devices

Graphene thermal conductive film for electronic devices

Topsen Technology represents the Sixth Element Material Technology and Toppen Technology, a world leading graphene manufacturer and pioneer in graphene's applications, in North America.
Printed Electronics World
Feb 21, 2019
Charting a path to cheaper flexible solar cells

Charting a path to cheaper flexible solar cells

There's a lot to like about perovskite-based solar cells. They are simple and cheap to produce, offer flexibility that could unlock a wide new range of installation methods and places, and in recent years have reached energy efficiencies approaching those of traditional silicon-based cells. But figuring out how to produce perovskite-based energy devices that last longer than a couple of months has been a challenge.
Printed Electronics World
Feb 20, 2019
13th Edition of Graphene B2B Conference Approaches

13th Edition of Graphene B2B Conference Approaches

Like many advanced materials, there is a significant learning curve to progress promising lab results to real commercial products. This includes a learning experience from the manufacturer, for cost-effective high-volume production, and a learning experience for the end-user, to establish the value and utilisation of this market entry. IDTechEx have been following this market throughout this learning experience, and the 13th edition of their…
Press Release
CPI collaborates on smart filter project

CPI collaborates on smart filter project

The Centre for Process Innovation has collaborated on a project to advance the development of a low-cost, self-cleaning coating technology for industrial filter membranes. The Smart Filter project used graphene and its derivatives to create a coated filter membrane that offers increased resistance to fouling for industrial waste water treatment.
Press Release
LasX invests in growth with Mike Riley joining as COO

LasX invests in growth with Mike Riley joining as COO

Mike Riley, a seasoned leader in manufacturing and distribution, joins LasX as the new COO.
Printed Electronics World
Feb 27, 2019
Printing OLED displays: has its time finally come?

Printing OLED displays: has its time finally come?

Solution processed light emitting organic materials were demonstrated in 1989 with a tiny 0.1 EQE (external quantum efficiency). Since then there has been tremendous progress on material synthesis/production as well as on display processing. However, thus far, commercialization has remained elusive. In this article we will argue that the page may be about to turn.
Printed Electronics World
Feb 27, 2019
IDTechEx TVStructural health monitoring using piezoelectric sensors

Structural health monitoring using piezoelectric sensors

Acellent provides real-time data from around the world, which makes for smarter structures and a safer world.
Printed Electronics World
Feb 26, 2019
Improving stability and optical properties of perovskite films

Improving stability and optical properties of perovskite films

Metal halide perovskites are regarded as next generation materials for light emitting devices. A recent joint-research has developed a new and efficient fabrication approach to produce all-inorganic perovskite films with better optical properties and stability, enabling the development of high colour-purity and low-cost perovskite LEDs with a high operational lifetime.
Printed Electronics World
Feb 25, 2019
Breakthrough in the search for graphene-based electronics

Breakthrough in the search for graphene-based electronics

For 15 years, scientists have tried to exploit the "miracle material" graphene to produce nanoscale electronics. On paper, graphene should be great for just that: it is ultra-thin - only one atom thick in fact and therefore two-dimensional, it is excellent for conducting electrical current and should be ideal for future forms of electronics that are faster and more energy efficient.
Printed Electronics World
Feb 25, 2019
IDTechEx TVNano-carbon material technology for energy storage applications

Nano-carbon material technology for energy storage applications

Nano-carbons have exceptional electrical, thermal and mechanical properties at the nano-scale level.
Printed Electronics World
Feb 22, 2019
'GO dough' makes graphene easy to shape and mold

'GO dough' makes graphene easy to shape and mold

A university team has turned graphene oxide into a soft, moldable and kneadable play dough that can be shaped and reshaped into free-standing, three-dimensional structures. The malleable material solves several long-standing — and sometimes explosive — problems in the graphene manufacturing industry.
Press Release
Automotive Interiors Project in Printed, In-Mold Electronics

Automotive Interiors Project in Printed, In-Mold Electronics

Today, Geely Design, CEVT and TactoTek® jointly announced that they have initiated projects to develop smart surfaces for multiple automotive brands owned by CEVT's parent company, Zhejiang Geely Holding Group. The current interiors project is the first of several anticipated by the framework agreement between the companies.
Printed Electronics World
Feb 20, 2019
Quantum dots: technology evolution display, lighting, sensor material

Quantum dots: technology evolution display, lighting, sensor material

Quantum dots are a commercial success for nanotechnology. They are already used in display applications. In this article, we discuss multiple innovation and commercialization frontiers of this technology.
Printed Electronics World
Feb 20, 2019
Sustainable electronics manufacturing breakthrough

Sustainable electronics manufacturing breakthrough

Researchers are developing an eco-friendly, 3D printable solution for producing wireless Internet-of-Things (IoT) sensors that can be used and disposed of without contaminating the environment.