Hosted by IDTechEx
External Company Press Release
New coatings product launch

New coatings product launch

Applied Graphene Materials, the producer of specialty graphene materials, is pleased to announce that Alltimes Coatings Ltd is launching its ground-breaking Advantage Graphene liquid coating roofing system, with significantly enhanced anti-corrosion performance delivered by the incorporation of AGM's graphene.
Printed Electronics World
Aug 28, 2019
Quantum dots: changing and expanding application landscape

Quantum dots: changing and expanding application landscape

Quantum dots (QD) are a success story in displays. The current incumbent mode of integration is film type (enhancement film). The value chain for this is well-established. The technology can be integrated in large displays (TVs) from 27" to 98". This article provides a brief look at multiple key applications.
Printed Electronics World
Aug 28, 2019
Laser printing tech produces waterproof e-textiles in minutes

Laser printing tech produces waterproof e-textiles in minutes

The next generation of waterproof smart fabrics will be laser printed and made in minutes. That's the future imagined by the researchers behind new e-textile technology.
Printed Electronics World
Aug 27, 2019
Organ-on-chip technology to advance drug development

Organ-on-chip technology to advance drug development

Researchers have developed an organ-on-an-electronic-chip platform, which uses bioelectrical sensors to measure the electrophysiology of the heart cells in three dimensions. These 3D, self-rolling biosensor arrays coil up over heart cell spheroid tissues to form an "organ-on-e-chip," thus enabling the researchers to study how cells communicate with each other in multicellular systems such as the heart.
Printed Electronics World
Aug 26, 2019
Graphene sensors that measure air quality a step closer to mass market

Graphene sensors that measure air quality a step closer to mass market

Graphene-based sensors that can measure the quality of air using the 2D Material could soon enter mass production thanks to a new partnership between a University of Manchester spin-out company and Chinese corporation, Tunghsu Optoelectronics.
Printed Electronics World
Aug 23, 2019
In-Mold Electronics: challenges in every step?

In-Mold Electronics: challenges in every step?

Our report, In-Mold Electronics 2019-2029: Technology, Market Forecasts, Players, suggests that in-mold electronics can become a market larger than $750m by 2028. The market take-off will however occur only around 2023 or 2024, if not later. This is despite the fact that the technology has been in the making for many years. Indeed, first near-success in the automotive sector came as early as 2013/2014.
Printed Electronics World
Aug 23, 2019
Smell Sensor Aroma Bit SDK-1Q, Aroma Coder 35Q Desktop Smell Sensor

Smell Sensor Aroma Bit SDK-1Q, Aroma Coder 35Q Desktop Smell Sensor

Aroma Bit is a developer of leading-edge olfactory aroma sensors​ that can digitize the sense of smell.
Printed Electronics World
Aug 23, 2019
Dycotec: A Growth Story

Dycotec: A Growth Story

IDTechEx recently interviewed Dycotec, a provider of printed electronics materials. Dycotec is an advanced materials company developing and manufacturing electrically and thermally conductive, insulator, adhesives and overcoat products. It sells over 50 standard products globally from low to high volume. It sells both directly via its on-line website or through global distribution channels in the US, Far East and India.
Printed Electronics World
Aug 22, 2019
Heat shield just 10 atoms thick to protect electronic devices

Heat shield just 10 atoms thick to protect electronic devices

Excess heat given off by smartphones, laptops and other electronic devices can be annoying, but beyond that it contributes to malfunctions and, in extreme cases, can even cause lithium batteries to explode.
External Company Press Release
ULVAC launches PZT piezoelectric thin-film process technology

ULVAC launches PZT piezoelectric thin-film process technology

ULVAC Launches Revolutionary PZT Piezoelectric Thin-film Process Technology and HVM Solution for MEMS Sensors /Actuators: Enabling Reliable, High-quality Film Production for Next Generation Devices,ULVAC: Advancing technologies to achieve smart societies.
Printed Electronics World
Aug 21, 2019
Nylon as a building block for transparent electronic devices?

Nylon as a building block for transparent electronic devices?

As the microelectronic industry is now shifting toward wearable electronic gadgets and electronic textiles, the comprising electronic materials, such as ferroelectrics, should be integrated with our clothes.
Printed Electronics World
Aug 21, 2019
Damaged hearts rewired with nanotube fibers

Damaged hearts rewired with nanotube fibers

Thin, flexible fibers made of carbon nanotubes have now proven able to bridge damaged heart tissues and deliver the electrical signals needed to keep those hearts beating.
External Company Press Release
Breakthrough in glass-free OLCD technology enables bezel-less displays

Breakthrough in glass-free OLCD technology enables bezel-less displays

FlexEnable, the leader in the development and industrialisation of flexible organic electronics, has revealed an ultra-narrow border organic LCD (OLCD).
Printed Electronics World
Aug 20, 2019
Tiny biodegradable circuits for releasing painkillers inside the body

Tiny biodegradable circuits for releasing painkillers inside the body

Researchers have developed biodegradable microresonators that can be heated locally with a wireless system. Doctors could soon be using them in implants to control the release of painkillers within tissue.
Printed Electronics World
Aug 19, 2019
Electronic paper patient and room information displays

Electronic paper patient and room information displays

The e-paper displays offer hospitals enhanced communication with staff and patients by replacing handwritten whiteboards with low power, highly readable E Ink based displays that pull essential information from the Electronic Health Record to clinical staff and patients areas, ensuring accurate communication and information exchange.
Printed Electronics World
Aug 19, 2019
Wireless sensors that stick to the skin

Wireless sensors that stick to the skin

Stanford engineers have developed experimental stickers that pick up physiological signals emanating from the skin, then wirelessly beam these health readings to a receiver clipped onto clothing. It's all part of a system called BodyNet.
Printed Electronics World
Aug 16, 2019
Towards smart packaging that detects the presence of salmonella

Towards smart packaging that detects the presence of salmonella

When food is recalled due to contamination from bacteria such as salmonella, one may wonder how a tainted product ended up on store shelves. New technology being developed could give retailers and regulators an earlier warning on dangers in food, improving public health and giving consumers peace of mind.
Printed Electronics World
Aug 15, 2019
Neural networks will help manufacture carbon nanotubes

Neural networks will help manufacture carbon nanotubes

Thin films made of carbon nanotubes hold a lot of promise for advanced optoelectronics, energy and medicine, however with their manufacturing process subject to close supervision and stringent standardization requirements, they are unlikely to become ubiquitous anytime soon.
Printed Electronics World
Aug 14, 2019
End User Presentations at World's Largest Event on Printed Electronics

End User Presentations at World's Largest Event on Printed Electronics

On November 20th and 21st, the 16th annual Printed Electronics USA event will take place in Santa Clara, California - the heart of silicon valley. Record bookings to date include 178 exhibiting companies, hailing from 25 countries, and a total of 250 speakers. The event is expected to exceed 3,500 attendees. Attendees registering by August 16, 2019 can save 30%.
External Company Press Release
SAFI-Tech's No-Heat SAC305 Receives Investment

SAFI-Tech's No-Heat SAC305 Receives Investment

The electronics manufacturing world has long been searching for a low-heat or no-heat solder solution. Advanced electronics designs with lightweight flexible substrates or sensitive miniaturized components require a dramatic reduction in processing heat while still meeting high operating temperature requirements.
External Company Press Release
New coatings product launch

New coatings product launch

Applied Graphene Materials, the producer of specialty graphene materials, is pleased to announce that Alltimes Coatings Ltd is launching its ground-breaking Advantage Graphene liquid coating roofing system, with significantly enhanced anti-corrosion performance delivered by the incorporation of AGM's graphene.
Printed Electronics World
Aug 28, 2019
Laser printing tech produces waterproof e-textiles in minutes

Laser printing tech produces waterproof e-textiles in minutes

The next generation of waterproof smart fabrics will be laser printed and made in minutes. That's the future imagined by the researchers behind new e-textile technology.
Printed Electronics World
Aug 26, 2019
Graphene sensors that measure air quality a step closer to mass market

Graphene sensors that measure air quality a step closer to mass market

Graphene-based sensors that can measure the quality of air using the 2D Material could soon enter mass production thanks to a new partnership between a University of Manchester spin-out company and Chinese corporation, Tunghsu Optoelectronics.
Printed Electronics World
Aug 23, 2019
Smell Sensor Aroma Bit SDK-1Q, Aroma Coder 35Q Desktop Smell Sensor

Smell Sensor Aroma Bit SDK-1Q, Aroma Coder 35Q Desktop Smell Sensor

Aroma Bit is a developer of leading-edge olfactory aroma sensors​ that can digitize the sense of smell.
Printed Electronics World
Aug 22, 2019
Heat shield just 10 atoms thick to protect electronic devices

Heat shield just 10 atoms thick to protect electronic devices

Excess heat given off by smartphones, laptops and other electronic devices can be annoying, but beyond that it contributes to malfunctions and, in extreme cases, can even cause lithium batteries to explode.
Printed Electronics World
Aug 21, 2019
Nylon as a building block for transparent electronic devices?

Nylon as a building block for transparent electronic devices?

As the microelectronic industry is now shifting toward wearable electronic gadgets and electronic textiles, the comprising electronic materials, such as ferroelectrics, should be integrated with our clothes.
External Company Press Release
Breakthrough in glass-free OLCD technology enables bezel-less displays

Breakthrough in glass-free OLCD technology enables bezel-less displays

FlexEnable, the leader in the development and industrialisation of flexible organic electronics, has revealed an ultra-narrow border organic LCD (OLCD).
Printed Electronics World
Aug 19, 2019
Electronic paper patient and room information displays

Electronic paper patient and room information displays

The e-paper displays offer hospitals enhanced communication with staff and patients by replacing handwritten whiteboards with low power, highly readable E Ink based displays that pull essential information from the Electronic Health Record to clinical staff and patients areas, ensuring accurate communication and information exchange.
Printed Electronics World
Aug 16, 2019
Towards smart packaging that detects the presence of salmonella

Towards smart packaging that detects the presence of salmonella

When food is recalled due to contamination from bacteria such as salmonella, one may wonder how a tainted product ended up on store shelves. New technology being developed could give retailers and regulators an earlier warning on dangers in food, improving public health and giving consumers peace of mind.
Printed Electronics World
Aug 14, 2019
End User Presentations at World's Largest Event on Printed Electronics

End User Presentations at World's Largest Event on Printed Electronics

On November 20th and 21st, the 16th annual Printed Electronics USA event will take place in Santa Clara, California - the heart of silicon valley. Record bookings to date include 178 exhibiting companies, hailing from 25 countries, and a total of 250 speakers. The event is expected to exceed 3,500 attendees. Attendees registering by August 16, 2019 can save 30%.
Printed Electronics World
Aug 28, 2019
Quantum dots: changing and expanding application landscape

Quantum dots: changing and expanding application landscape

Quantum dots (QD) are a success story in displays. The current incumbent mode of integration is film type (enhancement film). The value chain for this is well-established. The technology can be integrated in large displays (TVs) from 27" to 98". This article provides a brief look at multiple key applications.
Printed Electronics World
Aug 27, 2019
Organ-on-chip technology to advance drug development

Organ-on-chip technology to advance drug development

Researchers have developed an organ-on-an-electronic-chip platform, which uses bioelectrical sensors to measure the electrophysiology of the heart cells in three dimensions. These 3D, self-rolling biosensor arrays coil up over heart cell spheroid tissues to form an "organ-on-e-chip," thus enabling the researchers to study how cells communicate with each other in multicellular systems such as the heart.
Printed Electronics World
Aug 23, 2019
In-Mold Electronics: challenges in every step?

In-Mold Electronics: challenges in every step?

Our report, In-Mold Electronics 2019-2029: Technology, Market Forecasts, Players, suggests that in-mold electronics can become a market larger than $750m by 2028. The market take-off will however occur only around 2023 or 2024, if not later. This is despite the fact that the technology has been in the making for many years. Indeed, first near-success in the automotive sector came as early as 2013/2014.
Printed Electronics World
Aug 23, 2019
Dycotec: A Growth Story

Dycotec: A Growth Story

IDTechEx recently interviewed Dycotec, a provider of printed electronics materials. Dycotec is an advanced materials company developing and manufacturing electrically and thermally conductive, insulator, adhesives and overcoat products. It sells over 50 standard products globally from low to high volume. It sells both directly via its on-line website or through global distribution channels in the US, Far East and India.
External Company Press Release
ULVAC launches PZT piezoelectric thin-film process technology

ULVAC launches PZT piezoelectric thin-film process technology

ULVAC Launches Revolutionary PZT Piezoelectric Thin-film Process Technology and HVM Solution for MEMS Sensors /Actuators: Enabling Reliable, High-quality Film Production for Next Generation Devices,ULVAC: Advancing technologies to achieve smart societies.
Printed Electronics World
Aug 21, 2019
Damaged hearts rewired with nanotube fibers

Damaged hearts rewired with nanotube fibers

Thin, flexible fibers made of carbon nanotubes have now proven able to bridge damaged heart tissues and deliver the electrical signals needed to keep those hearts beating.
Printed Electronics World
Aug 20, 2019
Tiny biodegradable circuits for releasing painkillers inside the body

Tiny biodegradable circuits for releasing painkillers inside the body

Researchers have developed biodegradable microresonators that can be heated locally with a wireless system. Doctors could soon be using them in implants to control the release of painkillers within tissue.
Printed Electronics World
Aug 19, 2019
Wireless sensors that stick to the skin

Wireless sensors that stick to the skin

Stanford engineers have developed experimental stickers that pick up physiological signals emanating from the skin, then wirelessly beam these health readings to a receiver clipped onto clothing. It's all part of a system called BodyNet.
Printed Electronics World
Aug 15, 2019
Neural networks will help manufacture carbon nanotubes

Neural networks will help manufacture carbon nanotubes

Thin films made of carbon nanotubes hold a lot of promise for advanced optoelectronics, energy and medicine, however with their manufacturing process subject to close supervision and stringent standardization requirements, they are unlikely to become ubiquitous anytime soon.
External Company Press Release
SAFI-Tech's No-Heat SAC305 Receives Investment

SAFI-Tech's No-Heat SAC305 Receives Investment

The electronics manufacturing world has long been searching for a low-heat or no-heat solder solution. Advanced electronics designs with lightweight flexible substrates or sensitive miniaturized components require a dramatic reduction in processing heat while still meeting high operating temperature requirements.
More IDTechEx Journals