Hosted by IDTechEx
Printed Electronics World
Nov 30, 2020
Virtual Reality: The Most Disruptive Technology of the Next Decade

Virtual Reality: The Most Disruptive Technology of the Next Decade

Virtual reality has already had a major impact in a range of different industries. IDTechEx predicts in its recent market research report that this technology will grow to $8Bn by 2030.
Printed Electronics World
Nov 27, 2020
Upcoming Webinar on Graphene, 2D Materials, Carbon Nanotubes

Upcoming Webinar on Graphene, 2D Materials, Carbon Nanotubes

Tuesday 8 December 2020 (3 sessions to choose from) - This webinar will provide a detailed assessment and outlook for these advanced materials. The talk will highlight key developments, the impact of the COVID-19 pandemic, company performances, geographic variations, and application areas.
Printed Electronics World
Nov 26, 2020
IDTechEx: The Graphene Market Will Reach $700m by 2031

IDTechEx: The Graphene Market Will Reach $700m by 2031

Graphene materials are progressing through their own hype curve. The commercialization has been making steady progress and IDTechEx expect the graphene market to significantly grow over the next decade.
Printed Electronics World
Nov 25, 2020
Webinar: Technical Innovations in Printed/Flexible Electronics

Webinar: Technical Innovations in Printed/Flexible Electronics

Thursday 3 December (includes Q&A session) - Printed/flexible electronics is a constantly evolving area with extensive scope for innovation. In this webinar, Dr Matthew Dyson will discuss four technical innovations learned about in 2020.
Printed Electronics World
Nov 25, 2020
Printed and Flexible Electronics: Key Technology Highlights in 2020

Printed and Flexible Electronics: Key Technology Highlights in 2020

Printed/flexible electronics is a constantly evolving area with extensive scope for innovation. Here, IDTechEx outlines three of the most exciting technological highlights in the sector.
Printed Electronics World
Nov 24, 2020
2020 Fluoropolymer Technology Highlights by IDTechEx

2020 Fluoropolymer Technology Highlights by IDTechEx

Fluoropolymers are typically available as liquids and solids, but new fluoroelastomers are getting interest.
Printed Electronics World
Nov 24, 2020
Thermoelectrics Get More Attention

Thermoelectrics Get More Attention

A newer approach of serving low power electronics by area more than efficiency is promising.
Printed Electronics World
Nov 23, 2020
Three Costly Common Misunderstandings About 5G

Three Costly Common Misunderstandings About 5G

This IDTechEx article will focus on three common misunderstandings around the 5G market which are extremely important for decision making.
Printed Electronics World
Nov 20, 2020
Agrivoltaics Becoming Multi-Billion Dollar Industry

Agrivoltaics Becoming Multi-Billion Dollar Industry

One day solar "power stations" as we know them will be banned.
Printed Electronics World
Nov 20, 2020
New IDTechEx Report - Fluoropolymer Markets in Electrics, Electronics

New IDTechEx Report - Fluoropolymer Markets in Electrics, Electronics

IDTechEx have released a new report - "Fluoropolymer Markets in Electrics, Electronics 2021-2041" - 5G, 6G, THz, EV, tribo, fuel cell, solar, battery, sensor. New applications and formulations power this market to over $14 billion in 2041.
Printed Electronics World
Nov 19, 2020
3D Electronics Market Is Forecast to Reach Around $3bn by 2030

3D Electronics Market Is Forecast to Reach Around $3bn by 2030

The 3D electronics market is diversifying and is forecast to reach around $3bn by 2030. Find out more in the IDTechEx report, "3D Electronics 2020-2030: Technologies, Forecasts, Players".
Printed Electronics World
Nov 19, 2020
Printed Electronic Materials Market Forecast to Reach $6.9Bn by 2031

Printed Electronic Materials Market Forecast to Reach $6.9Bn by 2031

In total, IDTechEx Research forecast that the market for specialized solution processable materials for printed/flexible electronics will reach $6.9Bn by 2031.
Printed Electronics World
Nov 18, 2020
Fuel Cell Cars: A Commercial Failure

Fuel Cell Cars: A Commercial Failure

The IDTechEx report "Advanced Electric Cars 2020 - 2040" forecasts fuel-cell cars globally through 2040, and finds they continue to be a commercial failure for the next two decades.
Printed Electronics World
Nov 18, 2020
Webinar: Requirements and Trends of Low-Loss Materials for mmWave 5G

Webinar: Requirements and Trends of Low-Loss Materials for mmWave 5G

Join the IDTechEx webinar on Wednesday 25 November. Where will we need low-loss materials? What are the requirements for low-loss materials for mmWave 5G applications? Can thermosets materials compete with thermoplastics in the 5G market? How big is the market for low-loss materials?
Printed Electronics World
Nov 17, 2020
Desirable Metals for 3D Printing Near Market Readiness

Desirable Metals for 3D Printing Near Market Readiness

Despite a temporary setback owing to the COVID-19 pandemic, the market for 3D printing of metals is expected to see a significant rise over the next decade. Within that, it is anticipated that most of the revenue will be attributed to material sales.
Printed Electronics World
Nov 13, 2020
Join the Upcoming Webinar: Smart Cities Become Much More Ambitious

Join the Upcoming Webinar: Smart Cities Become Much More Ambitious

18 November 2020 - The expenditure on new technologies for emerging smart cities will pass one trillion dollars yearly. That is the subject of this webinar -sharing some of the research carried out by PhD level multilingual IDTechEx analysts worldwide for their new overview report on smart city technologies with 35 forecasts.
Printed Electronics World
Nov 13, 2020
New Report from IDTechEx on Materials for Printed/Flexible Electronics

New Report from IDTechEx on Materials for Printed/Flexible Electronics

IDTechEx have released a new market research report on materials for printed/flexible electronics - materials for OLEDs, photovoltaics (OPV), thin film transistors (OTFTs), photodetectors (OPDs). Also carbon nanotubes, perovskites, quantum dots, functional inorganic inks, component attachment materials, conductive inks.
Printed Electronics World
Nov 13, 2020
Micro-LED - Lighting the Way for Display Technologies?

Micro-LED - Lighting the Way for Display Technologies?

Micro-LED is exciting the markets and commentators, but the question of whether, and how, it will become the natural replacement for other LED technologies, including the currently dominant LCD and OLED, is somewhat complex.
Printed Electronics World
Nov 11, 2020
Smartphone Thermal Management Materials: What's New? What's Next?

Smartphone Thermal Management Materials: What's New? What's Next?

Thermal management is one of the most important considerations for all consumer electronics. The rise of 5G-enabled smartphones brings an increase in challenges.
Printed Electronics World
Nov 11, 2020
Join the IDTechEx Webinar on Printed/Flexible Electronics (With Q&A)

Join the IDTechEx Webinar on Printed/Flexible Electronics (With Q&A)

Thursday 12 November 2020 - Emerging Applications for Printed/Flexible Electronics. This webinar includes a Q&A session. Emerging applications that will be discussed in the webinar include: Electronic skin patches; Building integrated electronics; and Sticker electronics.
Printed Electronics World
Nov 30, 2020
Virtual Reality: The Most Disruptive Technology of the Next Decade

Virtual Reality: The Most Disruptive Technology of the Next Decade

Virtual reality has already had a major impact in a range of different industries. IDTechEx predicts in its recent market research report that this technology will grow to $8Bn by 2030.
Printed Electronics World
Nov 26, 2020
IDTechEx: The Graphene Market Will Reach $700m by 2031

IDTechEx: The Graphene Market Will Reach $700m by 2031

Graphene materials are progressing through their own hype curve. The commercialization has been making steady progress and IDTechEx expect the graphene market to significantly grow over the next decade.
Printed Electronics World
Nov 25, 2020
Printed and Flexible Electronics: Key Technology Highlights in 2020

Printed and Flexible Electronics: Key Technology Highlights in 2020

Printed/flexible electronics is a constantly evolving area with extensive scope for innovation. Here, IDTechEx outlines three of the most exciting technological highlights in the sector.
Printed Electronics World
Nov 24, 2020
Thermoelectrics Get More Attention

Thermoelectrics Get More Attention

A newer approach of serving low power electronics by area more than efficiency is promising.
Printed Electronics World
Nov 20, 2020
Agrivoltaics Becoming Multi-Billion Dollar Industry

Agrivoltaics Becoming Multi-Billion Dollar Industry

One day solar "power stations" as we know them will be banned.
Printed Electronics World
Nov 19, 2020
3D Electronics Market Is Forecast to Reach Around $3bn by 2030

3D Electronics Market Is Forecast to Reach Around $3bn by 2030

The 3D electronics market is diversifying and is forecast to reach around $3bn by 2030. Find out more in the IDTechEx report, "3D Electronics 2020-2030: Technologies, Forecasts, Players".
Printed Electronics World
Nov 18, 2020
Fuel Cell Cars: A Commercial Failure

Fuel Cell Cars: A Commercial Failure

The IDTechEx report "Advanced Electric Cars 2020 - 2040" forecasts fuel-cell cars globally through 2040, and finds they continue to be a commercial failure for the next two decades.
Printed Electronics World
Nov 17, 2020
Desirable Metals for 3D Printing Near Market Readiness

Desirable Metals for 3D Printing Near Market Readiness

Despite a temporary setback owing to the COVID-19 pandemic, the market for 3D printing of metals is expected to see a significant rise over the next decade. Within that, it is anticipated that most of the revenue will be attributed to material sales.
Printed Electronics World
Nov 13, 2020
New Report from IDTechEx on Materials for Printed/Flexible Electronics

New Report from IDTechEx on Materials for Printed/Flexible Electronics

IDTechEx have released a new market research report on materials for printed/flexible electronics - materials for OLEDs, photovoltaics (OPV), thin film transistors (OTFTs), photodetectors (OPDs). Also carbon nanotubes, perovskites, quantum dots, functional inorganic inks, component attachment materials, conductive inks.
Printed Electronics World
Nov 11, 2020
Smartphone Thermal Management Materials: What's New? What's Next?

Smartphone Thermal Management Materials: What's New? What's Next?

Thermal management is one of the most important considerations for all consumer electronics. The rise of 5G-enabled smartphones brings an increase in challenges.
Printed Electronics World
Nov 27, 2020
Upcoming Webinar on Graphene, 2D Materials, Carbon Nanotubes

Upcoming Webinar on Graphene, 2D Materials, Carbon Nanotubes

Tuesday 8 December 2020 (3 sessions to choose from) - This webinar will provide a detailed assessment and outlook for these advanced materials. The talk will highlight key developments, the impact of the COVID-19 pandemic, company performances, geographic variations, and application areas.
Printed Electronics World
Nov 25, 2020
Webinar: Technical Innovations in Printed/Flexible Electronics

Webinar: Technical Innovations in Printed/Flexible Electronics

Thursday 3 December (includes Q&A session) - Printed/flexible electronics is a constantly evolving area with extensive scope for innovation. In this webinar, Dr Matthew Dyson will discuss four technical innovations learned about in 2020.
Printed Electronics World
Nov 24, 2020
2020 Fluoropolymer Technology Highlights by IDTechEx

2020 Fluoropolymer Technology Highlights by IDTechEx

Fluoropolymers are typically available as liquids and solids, but new fluoroelastomers are getting interest.
Printed Electronics World
Nov 23, 2020
Three Costly Common Misunderstandings About 5G

Three Costly Common Misunderstandings About 5G

This IDTechEx article will focus on three common misunderstandings around the 5G market which are extremely important for decision making.
Printed Electronics World
Nov 20, 2020
New IDTechEx Report - Fluoropolymer Markets in Electrics, Electronics

New IDTechEx Report - Fluoropolymer Markets in Electrics, Electronics

IDTechEx have released a new report - "Fluoropolymer Markets in Electrics, Electronics 2021-2041" - 5G, 6G, THz, EV, tribo, fuel cell, solar, battery, sensor. New applications and formulations power this market to over $14 billion in 2041.
Printed Electronics World
Nov 19, 2020
Printed Electronic Materials Market Forecast to Reach $6.9Bn by 2031

Printed Electronic Materials Market Forecast to Reach $6.9Bn by 2031

In total, IDTechEx Research forecast that the market for specialized solution processable materials for printed/flexible electronics will reach $6.9Bn by 2031.
Printed Electronics World
Nov 18, 2020
Webinar: Requirements and Trends of Low-Loss Materials for mmWave 5G

Webinar: Requirements and Trends of Low-Loss Materials for mmWave 5G

Join the IDTechEx webinar on Wednesday 25 November. Where will we need low-loss materials? What are the requirements for low-loss materials for mmWave 5G applications? Can thermosets materials compete with thermoplastics in the 5G market? How big is the market for low-loss materials?
Printed Electronics World
Nov 13, 2020
Join the Upcoming Webinar: Smart Cities Become Much More Ambitious

Join the Upcoming Webinar: Smart Cities Become Much More Ambitious

18 November 2020 - The expenditure on new technologies for emerging smart cities will pass one trillion dollars yearly. That is the subject of this webinar -sharing some of the research carried out by PhD level multilingual IDTechEx analysts worldwide for their new overview report on smart city technologies with 35 forecasts.
Printed Electronics World
Nov 13, 2020
Micro-LED - Lighting the Way for Display Technologies?

Micro-LED - Lighting the Way for Display Technologies?

Micro-LED is exciting the markets and commentators, but the question of whether, and how, it will become the natural replacement for other LED technologies, including the currently dominant LCD and OLED, is somewhat complex.
Printed Electronics World
Nov 11, 2020
Join the IDTechEx Webinar on Printed/Flexible Electronics (With Q&A)

Join the IDTechEx Webinar on Printed/Flexible Electronics (With Q&A)

Thursday 12 November 2020 - Emerging Applications for Printed/Flexible Electronics. This webinar includes a Q&A session. Emerging applications that will be discussed in the webinar include: Electronic skin patches; Building integrated electronics; and Sticker electronics.
More IDTechEx Journals