Hosted by IDTechEx
Printed Electronics World
Jun 30, 2022
Upcoming Webinar on Perovskite Photovoltaics

Upcoming Webinar on Perovskite Photovoltaics

Thursday 14 July 2022 - Perovskite Photovoltaics: The Solution to our Energy Needs? How perovskites can resolve technology gaps within the photovoltaics market; Discussion of difficulties facing the commercialisation; Overview of emerging applications and readiness levels; and roadmaps for the future of perovskite photovoltaics
Printed Electronics World
Jun 30, 2022
The Next Stage in Thermal Materials for 5G

The Next Stage in Thermal Materials for 5G

Whilst much of the "5G" infrastructure is a moderate upgrade on existing 4G technology, there is still plenty of scope for higher frequency deployment such as mmWave devices and very different station types such as small cells. Each of these new developments presents its own technological evolution and with it, thermal challenges.
Printed Electronics World
Jun 29, 2022
Automotive Autonomy: A New Opportunity for Thermal Materials

Automotive Autonomy: A New Opportunity for Thermal Materials

IDTechEx's new report, "Thermal Management for ADAS: 2023-2033" finds that the yearly market value for thermal interface materials (TIMs) in ADAS will increase 11-fold over the next 10 years.
Printed Electronics World
Jun 28, 2022
Carbon Nanotubes: Is Bigger Better?

Carbon Nanotubes: Is Bigger Better?

Nanomaterials remain a significant growth area with the potential to enable a wide range of next-generation technologies. This article will focus on CNT yarns and sheets before expanding on to high-aspect-ratio and hybrid materials; these are all at an earlier commercial stage than the main MWCNT market.
Printed Electronics World
Jun 22, 2022
IDTechEx Release New Report on Thermal Management for ADAS

IDTechEx Release New Report on Thermal Management for ADAS

Thermal Management for Advanced Driver-Assistance Systems (ADAS) 2023-2033 - Thermal management challenges, solutions, and trends for cameras, radars, LiDARs, and automotive computers. Thermal interface materials, die attach, radome materials and electromagnetic interference, analysis, players, and market forecasts
Printed Electronics World
Jun 20, 2022
3D Printing Materials: A $29.5 Billion Opportunity Ripe for Innovation

3D Printing Materials: A $29.5 Billion Opportunity Ripe for Innovation

The growth potential for AM materials differs from printing equipment, as operational legacy printers continue to consume materials. Therefore, this segment of the 3D printing value chain represents a tremendous opportunity.
Printed Electronics World
Jun 16, 2022
Unlocking the Power of Perovskite Photovoltaics

Unlocking the Power of Perovskite Photovoltaics

IDTechEx's new report, "Perovskite Photovoltaics 2023-2033", explores the diverse range of opportunities presented by perovskite PV, including gaps in demand, supply chain innovation, and emerging applications.
Printed Electronics World
Jun 13, 2022
Upcoming Free-to-Attend Webinar - New Opportunities for Gas Sensors

Upcoming Free-to-Attend Webinar - New Opportunities for Gas Sensors

Thursday 23 June 2022 - Mass-digitization trend is predicted to cause the gas sensor market to surpass $8 billion by 2032. The gas sensor market is a complex combination of multiple technologies and applications - and understanding where true opportunities for commercial success exist is challenging.
Printed Electronics World
Jun 9, 2022
Air Quality Monitoring: Not Just an Urban Concern?

Air Quality Monitoring: Not Just an Urban Concern?

Air quality concerns are on the rise globally, with urban pollution the dominant cause. However, radon accumulation and unpleasant aromas are often bigger problems in rural locations, creating opportunities for gas sensors that offer continuous monitoring and even odor categorization.
Printed Electronics World
Jun 2, 2022
Metal 3D Printing Technology Landscape - The Trends and the Whitespace

Metal 3D Printing Technology Landscape - The Trends and the Whitespace

Perfectly imperfect - that is the technology landscape in metal 3D printing boiled down. Through an extensive benchmarking study, IDTechEx has asked the question: where are metal additive manufacturing technologies going, and where are the whitespaces for advancement in the metal AM landscape?
Printed Electronics World
May 31, 2022
Still Waiting on a Commercial Need for Take-off: SWCNTs

Still Waiting on a Commercial Need for Take-off: SWCNTs

Commercializing a new material is not easy. Single-walled carbon nanotubes (SWCNTs) are the higher-performance variants of the carbon nanotube family, but unlike their multi-walled counterpart, they are still hunting for their killer application.
Printed Electronics World
May 27, 2022
Join the Upcoming Webinar on Carbon Dioxide Utilization

Join the Upcoming Webinar on Carbon Dioxide Utilization

Thursday 9 June 2022 - What is CO2 utilization and how is CO2 converted into useful products? What is the current state of the CO2U market? What are the key drivers and hurdles for CO2U market growth? What is the CO2U market outlook for the next 20 years?
Printed Electronics World
May 26, 2022
The Waning COVID-19 Pandemic's Lasting Effect on Point-Of-Care

The Waning COVID-19 Pandemic's Lasting Effect on Point-Of-Care

COVID-19 testing at point of care peaked in Q1 2022. Is testing waning? What is COVID-19's lasting effect on point-of-care testing?
Printed Electronics World
May 23, 2022
How Will Walmart's RFID Mandate Impact RFID Adoption in Retail?

How Will Walmart's RFID Mandate Impact RFID Adoption in Retail?

The big news in the RFID industry at the start of 2022 was Walmart's announcement — the world's leading retailer revealed plans to expand RFID use from retail apparel to other retail departments. What effect will this have on RFID adoption in retail?
Printed Electronics World
May 19, 2022
Mass Digitization to Drive Gas Sensor Growth to $8.4 Billion

Mass Digitization to Drive Gas Sensor Growth to $8.4 Billion

Gas sensors are simultaneously an established and emerging industry, creating a complex web of technologies and applications for stakeholders to understand. Detection methods span a diverse technology landscape, ranging from semiconductor and optical to acoustic and photoionization.
Printed Electronics World
May 10, 2022
New IDTechEx Report Explores the Future of Carbon Utilization

New IDTechEx Report Explores the Future of Carbon Utilization

As mitigating the effects of climate change becomes one of the world's top priorities, carbon dioxide utilization (CO2U) technologies have been set forth as part of the solution.
Printed Electronics World
May 5, 2022
The Rise of the Carbon Nanotube Battery

The Rise of the Carbon Nanotube Battery

It is impossible to avoid headlines about the "graphene battery"; the concept of this Nobel Prize winning nanomaterial revolutionizing the energy storage market is naturally very enticing, but it is graphene's older sibling carbon nanotubes that have progressed beyond the hype and disillusionment phases of their commercial journey by finding a value-add high volume energy storage adoption.
Printed Electronics World
May 3, 2022
Metal Additive Manufacturing: Don't Tell Me, Show Me

Metal Additive Manufacturing: Don't Tell Me, Show Me

Since 3D Systems commercialized stereolithography 30 years ago, 3D printer manufacturers who invented their own proprietary technology predominantly followed the same business strategy: selling their printers to customers. Until recently, it was the norm for established and rising 3D printing players, both in metal and polymer additive manufacturing, to follow the same path.
Printed Electronics World
May 3, 2022
Upcoming Webinar - Point-of-Care Biosensors: COVID-19 and Beyond

Upcoming Webinar - Point-of-Care Biosensors: COVID-19 and Beyond

Thursday 5 May 2022 - What is driving the growing need for point-of-care? Is point-of-care too expensive? What's next for COVID-19 point-of-care? The webinar will discuss growth during the COVID-19 pandemic; the market beyond COVID-19; key trends; and emerging transduction methods at point-of-care
Printed Electronics World
Apr 27, 2022
Evaluating the Sustainability of 3D Electronics

Evaluating the Sustainability of 3D Electronics

As electronics being increasingly ubiquitous, there is a clear trend toward greater integration. Rather than simply making space for a rigid 2D circuit board (PCB) within the product, electronic functionality will be either mounted conformally onto surfaces or incorporated within the structural materials.
Printed Electronics World
Jun 30, 2022
Upcoming Webinar on Perovskite Photovoltaics

Upcoming Webinar on Perovskite Photovoltaics

Thursday 14 July 2022 - Perovskite Photovoltaics: The Solution to our Energy Needs? How perovskites can resolve technology gaps within the photovoltaics market; Discussion of difficulties facing the commercialisation; Overview of emerging applications and readiness levels; and roadmaps for the future of perovskite photovoltaics
Printed Electronics World
Jun 29, 2022
Automotive Autonomy: A New Opportunity for Thermal Materials

Automotive Autonomy: A New Opportunity for Thermal Materials

IDTechEx's new report, "Thermal Management for ADAS: 2023-2033" finds that the yearly market value for thermal interface materials (TIMs) in ADAS will increase 11-fold over the next 10 years.
Printed Electronics World
Jun 22, 2022
IDTechEx Release New Report on Thermal Management for ADAS

IDTechEx Release New Report on Thermal Management for ADAS

Thermal Management for Advanced Driver-Assistance Systems (ADAS) 2023-2033 - Thermal management challenges, solutions, and trends for cameras, radars, LiDARs, and automotive computers. Thermal interface materials, die attach, radome materials and electromagnetic interference, analysis, players, and market forecasts
Printed Electronics World
Jun 16, 2022
Unlocking the Power of Perovskite Photovoltaics

Unlocking the Power of Perovskite Photovoltaics

IDTechEx's new report, "Perovskite Photovoltaics 2023-2033", explores the diverse range of opportunities presented by perovskite PV, including gaps in demand, supply chain innovation, and emerging applications.
Printed Electronics World
Jun 9, 2022
Air Quality Monitoring: Not Just an Urban Concern?

Air Quality Monitoring: Not Just an Urban Concern?

Air quality concerns are on the rise globally, with urban pollution the dominant cause. However, radon accumulation and unpleasant aromas are often bigger problems in rural locations, creating opportunities for gas sensors that offer continuous monitoring and even odor categorization.
Printed Electronics World
May 31, 2022
Still Waiting on a Commercial Need for Take-off: SWCNTs

Still Waiting on a Commercial Need for Take-off: SWCNTs

Commercializing a new material is not easy. Single-walled carbon nanotubes (SWCNTs) are the higher-performance variants of the carbon nanotube family, but unlike their multi-walled counterpart, they are still hunting for their killer application.
Printed Electronics World
May 26, 2022
The Waning COVID-19 Pandemic's Lasting Effect on Point-Of-Care

The Waning COVID-19 Pandemic's Lasting Effect on Point-Of-Care

COVID-19 testing at point of care peaked in Q1 2022. Is testing waning? What is COVID-19's lasting effect on point-of-care testing?
Printed Electronics World
May 19, 2022
Mass Digitization to Drive Gas Sensor Growth to $8.4 Billion

Mass Digitization to Drive Gas Sensor Growth to $8.4 Billion

Gas sensors are simultaneously an established and emerging industry, creating a complex web of technologies and applications for stakeholders to understand. Detection methods span a diverse technology landscape, ranging from semiconductor and optical to acoustic and photoionization.
Printed Electronics World
May 5, 2022
The Rise of the Carbon Nanotube Battery

The Rise of the Carbon Nanotube Battery

It is impossible to avoid headlines about the "graphene battery"; the concept of this Nobel Prize winning nanomaterial revolutionizing the energy storage market is naturally very enticing, but it is graphene's older sibling carbon nanotubes that have progressed beyond the hype and disillusionment phases of their commercial journey by finding a value-add high volume energy storage adoption.
Printed Electronics World
May 3, 2022
Upcoming Webinar - Point-of-Care Biosensors: COVID-19 and Beyond

Upcoming Webinar - Point-of-Care Biosensors: COVID-19 and Beyond

Thursday 5 May 2022 - What is driving the growing need for point-of-care? Is point-of-care too expensive? What's next for COVID-19 point-of-care? The webinar will discuss growth during the COVID-19 pandemic; the market beyond COVID-19; key trends; and emerging transduction methods at point-of-care
Printed Electronics World
Jun 30, 2022
The Next Stage in Thermal Materials for 5G

The Next Stage in Thermal Materials for 5G

Whilst much of the "5G" infrastructure is a moderate upgrade on existing 4G technology, there is still plenty of scope for higher frequency deployment such as mmWave devices and very different station types such as small cells. Each of these new developments presents its own technological evolution and with it, thermal challenges.
Printed Electronics World
Jun 28, 2022
Carbon Nanotubes: Is Bigger Better?

Carbon Nanotubes: Is Bigger Better?

Nanomaterials remain a significant growth area with the potential to enable a wide range of next-generation technologies. This article will focus on CNT yarns and sheets before expanding on to high-aspect-ratio and hybrid materials; these are all at an earlier commercial stage than the main MWCNT market.
Printed Electronics World
Jun 20, 2022
3D Printing Materials: A $29.5 Billion Opportunity Ripe for Innovation

3D Printing Materials: A $29.5 Billion Opportunity Ripe for Innovation

The growth potential for AM materials differs from printing equipment, as operational legacy printers continue to consume materials. Therefore, this segment of the 3D printing value chain represents a tremendous opportunity.
Printed Electronics World
Jun 13, 2022
Upcoming Free-to-Attend Webinar - New Opportunities for Gas Sensors

Upcoming Free-to-Attend Webinar - New Opportunities for Gas Sensors

Thursday 23 June 2022 - Mass-digitization trend is predicted to cause the gas sensor market to surpass $8 billion by 2032. The gas sensor market is a complex combination of multiple technologies and applications - and understanding where true opportunities for commercial success exist is challenging.
Printed Electronics World
Jun 2, 2022
Metal 3D Printing Technology Landscape - The Trends and the Whitespace

Metal 3D Printing Technology Landscape - The Trends and the Whitespace

Perfectly imperfect - that is the technology landscape in metal 3D printing boiled down. Through an extensive benchmarking study, IDTechEx has asked the question: where are metal additive manufacturing technologies going, and where are the whitespaces for advancement in the metal AM landscape?
Printed Electronics World
May 27, 2022
Join the Upcoming Webinar on Carbon Dioxide Utilization

Join the Upcoming Webinar on Carbon Dioxide Utilization

Thursday 9 June 2022 - What is CO2 utilization and how is CO2 converted into useful products? What is the current state of the CO2U market? What are the key drivers and hurdles for CO2U market growth? What is the CO2U market outlook for the next 20 years?
Printed Electronics World
May 23, 2022
How Will Walmart's RFID Mandate Impact RFID Adoption in Retail?

How Will Walmart's RFID Mandate Impact RFID Adoption in Retail?

The big news in the RFID industry at the start of 2022 was Walmart's announcement — the world's leading retailer revealed plans to expand RFID use from retail apparel to other retail departments. What effect will this have on RFID adoption in retail?
Printed Electronics World
May 10, 2022
New IDTechEx Report Explores the Future of Carbon Utilization

New IDTechEx Report Explores the Future of Carbon Utilization

As mitigating the effects of climate change becomes one of the world's top priorities, carbon dioxide utilization (CO2U) technologies have been set forth as part of the solution.
Printed Electronics World
May 3, 2022
Metal Additive Manufacturing: Don't Tell Me, Show Me

Metal Additive Manufacturing: Don't Tell Me, Show Me

Since 3D Systems commercialized stereolithography 30 years ago, 3D printer manufacturers who invented their own proprietary technology predominantly followed the same business strategy: selling their printers to customers. Until recently, it was the norm for established and rising 3D printing players, both in metal and polymer additive manufacturing, to follow the same path.
Printed Electronics World
Apr 27, 2022
Evaluating the Sustainability of 3D Electronics

Evaluating the Sustainability of 3D Electronics

As electronics being increasingly ubiquitous, there is a clear trend toward greater integration. Rather than simply making space for a rigid 2D circuit board (PCB) within the product, electronic functionality will be either mounted conformally onto surfaces or incorporated within the structural materials.
More IDTechEx Journals