Hosted by IDTechEx
Printed Electronics World
Mar 13, 2013
Prospects of graphene transistors for high-frequency electronics

Prospects of graphene transistors for high-frequency electronics

In the end graphene transistors currently look extremely promising for revolutionize both, high-frequency electronics and plastic electronics, especially as the expected performance has been proven recently at least in single devices.
External Company Press Release
Efficiency breakthroughs in OLED and high brightness GaN LEDs

Efficiency breakthroughs in OLED and high brightness GaN LEDs

Verbatim has unveil groundbreaking technological advances in OLED and gallium nitride (GaN) LEDs that deliver unrivalled efficiency and brightness.
Printed Electronics World
Mar 12, 2013
Spray coating and spin coating of rGO thin film sheets

Spray coating and spin coating of rGO thin film sheets

GRAnPH® Nanotech, in collaboration with CENER (Spanish National Renewable Energy Center), have developed continuous graphene oxide (GO) and reduced graphene oxide (rGO) thin films over a variety of substrates by means of two different industrial deposition techniques: spin - coating and spray coating.
External Company Press Release
Partnership to make toys more interactive through printed electronics

Partnership to make toys more interactive through printed electronics

The FLEXeTOY project, totals € 981,687 and will end in 2015.
IDTechEx Research Subscribers
Display Trends: OLEDs, LCDs and E-Readers

Display Trends: OLEDs, LCDs and E-Readers

LCD panel makers in Taiwan, Japan and Korea have been suffering. Despite the growing demand for LCDs the high number of panel makers and new competition from China has resulted in severe price competition, to the point that many panel makers are no longer profitable.
Printed Electronics World
Mar 11, 2013
Cost is the main differentiator between graphene and other nanocarbons

Cost is the main differentiator between graphene and other nanocarbons

Graphene, an atom-thin layer of carbon, is transparent enough to see through yet can stretch up to 20 percent of its length.
Printed Electronics World
Mar 8, 2013
Argonne and CalBattery strike deal for silicon-graphene anode material

Argonne and CalBattery strike deal for silicon-graphene anode material

The U.S. Department of Energy's Argonne National Laboratory and California Lithium Battery, Inc. (CalBattery) have announced that they have signed a licensing agreement for an Argonne-developed, silicon-graphene composite anode material for high-energy lithium batteries.
Printed Electronics World
Mar 8, 2013
Integration challenges for graphene and carbon nanotubes

Integration challenges for graphene and carbon nanotubes

The world has experienced miraculous developments during the last decade harvested from fullerenes, carbon nanotubes (CNTs) and today graphene.
Printed Electronics World
Mar 7, 2013
Creating a healthy graphene industry

Creating a healthy graphene industry

Graphene Technologies (GT) is a Silicon Valley-based early commercial stage company that has patented and developed a synthesis technology for production of high quality bulk graphene.
Printed Electronics World
Mar 6, 2013
Xolve's graphene technology to change composite price/performance

Xolve's graphene technology to change composite price/performance

Nanotechnology has long offered the promise of wonderful new materials and vast improvements in the essentials of modern life. To date, however, this technology has been accused of falling short of such potential. In spite of billions invested in nanomaterials research, no life-changing nano products have made their way to market.
Printed Electronics World
Mar 6, 2013
Haptic feedback for touch screen devices

Haptic feedback for touch screen devices

More and more consumer electronics devices feature a touch screen, which is already considered a must have for new devices. The next big topic will be haptic feedback solutions outperforming the poor vibration-based feedback that is the standard today. Adding haptic and sound feedback to touch screens using electro active polymers (EAPs) will be a featured topic at TCF LIVE Europe 2013 .
Printed Electronics World
Mar 5, 2013
Graphene Special Edition - commercial potentials and challenges

Graphene Special Edition - commercial potentials and challenges

IDTechEx Research is launching a special edition dedicated to graphene on its Printed Electronics World online journal. For two consecutive weeks, you will read invited articles outlining the views of select industry and academic players about the commercial potential and challenges facing the emerging graphene industry.
External Company Press Release
Acquisition of PulseForge Photonic Curing Tool

Acquisition of PulseForge Photonic Curing Tool

The Center of Microelectronics of Provence, part of Ecole Nationale Superieure des Mines de Saint-Etienne, France, is pleased to announce it has acquired a PulseForge 3200 photonic curing tool from NovaCentrix as part of an ongoing collaboration with NovaCentrix (Austin, Texas), and CERADROP (Limoge, France).
Printed Electronics World
Mar 4, 2013
Air Force supports study on nanopaper for electronics, aircraft

Air Force supports study on nanopaper for electronics, aircraft

Like ordinary paper, nanopaper is made of wood pulp, but reconstructed at the nanoscale to enhance its properties.
Printed Electronics World
Mar 4, 2013
First graphene-based additive for lithium-ion batteries

First graphene-based additive for lithium-ion batteries

Cabot Corp has announced the launch of LITX™ G700, the company's first graphene-based additive for high energy density lithium-ion battery applications.
External Company Press Release
Fully integrated JetXpert print station now available from ImageXpert

Fully integrated JetXpert print station now available from ImageXpert

Building on the market-leading success of the JetXpert platform for analysis of drops-in-flight, ImageXpert is now offering a JetXpert system with integrated print station.
Printed Electronics World
Mar 1, 2013
Researchers strain to improve electrical material and it's worth it

Researchers strain to improve electrical material and it's worth it

University of Illinois at Urbana-Champaign researchers have devised a method of making ferroelectric thin films with twice the strain, resulting in exceptional performance.
Printed Electronics World
Mar 1, 2013
INTRASME Electric Vehicle Opportunity Workshop

INTRASME Electric Vehicle Opportunity Workshop

IDTechEx is delighted to host the first INTRASME Electric Vehicle Opportunity Workshop 2013 which will now be a free session for a full day.
IDTechEx Research Subscribers
Ubiquity or obsolescence: how is E Ink's success story going to end?

Ubiquity or obsolescence: how is E Ink's success story going to end?

Looking back at last year, it looks like 2012 was a tipping point for the e-reader market. Kindles and the likes were overshadowed by new models of tablet computers, resulting in a shift in consumer spending towards the tablets. But e-readers are still hugely popular, not least because of their long battery life and their low price. Since the holiday season, the must-have new feature has been the frontlight that enables reading in the dark, such as in the new Amazon Kindle Paperwhite. But take a closer look at this new generation of e-readers and you will find something striking: all of them use the same E Ink Pearl display, a technology that was released more than two years ago.
Printed Electronics World
Feb 26, 2013
Graphene could lead to faster-charging batteries for electric vehicles

Graphene could lead to faster-charging batteries for electric vehicles

An agreement will allow Vorbeck to bring lithium batteries incorporating Vor-x graphene technology to market for use in consumer portable electronic and medical devices, tools and electric vehicles.
Printed Electronics World
Mar 13, 2013
Prospects of graphene transistors for high-frequency electronics

Prospects of graphene transistors for high-frequency electronics

In the end graphene transistors currently look extremely promising for revolutionize both, high-frequency electronics and plastic electronics, especially as the expected performance has been proven recently at least in single devices.
Printed Electronics World
Mar 12, 2013
Spray coating and spin coating of rGO thin film sheets

Spray coating and spin coating of rGO thin film sheets

GRAnPH® Nanotech, in collaboration with CENER (Spanish National Renewable Energy Center), have developed continuous graphene oxide (GO) and reduced graphene oxide (rGO) thin films over a variety of substrates by means of two different industrial deposition techniques: spin - coating and spray coating.
IDTechEx Research Subscribers
Display Trends: OLEDs, LCDs and E-Readers

Display Trends: OLEDs, LCDs and E-Readers

LCD panel makers in Taiwan, Japan and Korea have been suffering. Despite the growing demand for LCDs the high number of panel makers and new competition from China has resulted in severe price competition, to the point that many panel makers are no longer profitable.
Printed Electronics World
Mar 8, 2013
Argonne and CalBattery strike deal for silicon-graphene anode material

Argonne and CalBattery strike deal for silicon-graphene anode material

The U.S. Department of Energy's Argonne National Laboratory and California Lithium Battery, Inc. (CalBattery) have announced that they have signed a licensing agreement for an Argonne-developed, silicon-graphene composite anode material for high-energy lithium batteries.
Printed Electronics World
Mar 7, 2013
Creating a healthy graphene industry

Creating a healthy graphene industry

Graphene Technologies (GT) is a Silicon Valley-based early commercial stage company that has patented and developed a synthesis technology for production of high quality bulk graphene.
Printed Electronics World
Mar 6, 2013
Haptic feedback for touch screen devices

Haptic feedback for touch screen devices

More and more consumer electronics devices feature a touch screen, which is already considered a must have for new devices. The next big topic will be haptic feedback solutions outperforming the poor vibration-based feedback that is the standard today. Adding haptic and sound feedback to touch screens using electro active polymers (EAPs) will be a featured topic at TCF LIVE Europe 2013 .
External Company Press Release
Acquisition of PulseForge Photonic Curing Tool

Acquisition of PulseForge Photonic Curing Tool

The Center of Microelectronics of Provence, part of Ecole Nationale Superieure des Mines de Saint-Etienne, France, is pleased to announce it has acquired a PulseForge 3200 photonic curing tool from NovaCentrix as part of an ongoing collaboration with NovaCentrix (Austin, Texas), and CERADROP (Limoge, France).
Printed Electronics World
Mar 4, 2013
First graphene-based additive for lithium-ion batteries

First graphene-based additive for lithium-ion batteries

Cabot Corp has announced the launch of LITX™ G700, the company's first graphene-based additive for high energy density lithium-ion battery applications.
Printed Electronics World
Mar 1, 2013
Researchers strain to improve electrical material and it's worth it

Researchers strain to improve electrical material and it's worth it

University of Illinois at Urbana-Champaign researchers have devised a method of making ferroelectric thin films with twice the strain, resulting in exceptional performance.
IDTechEx Research Subscribers
Ubiquity or obsolescence: how is E Ink's success story going to end?

Ubiquity or obsolescence: how is E Ink's success story going to end?

Looking back at last year, it looks like 2012 was a tipping point for the e-reader market. Kindles and the likes were overshadowed by new models of tablet computers, resulting in a shift in consumer spending towards the tablets. But e-readers are still hugely popular, not least because of their long battery life and their low price. Since the holiday season, the must-have new feature has been the frontlight that enables reading in the dark, such as in the new Amazon Kindle Paperwhite. But take a closer look at this new generation of e-readers and you will find something striking: all of them use the same E Ink Pearl display, a technology that was released more than two years ago.
External Company Press Release
Efficiency breakthroughs in OLED and high brightness GaN LEDs

Efficiency breakthroughs in OLED and high brightness GaN LEDs

Verbatim has unveil groundbreaking technological advances in OLED and gallium nitride (GaN) LEDs that deliver unrivalled efficiency and brightness.
External Company Press Release
Partnership to make toys more interactive through printed electronics

Partnership to make toys more interactive through printed electronics

The FLEXeTOY project, totals € 981,687 and will end in 2015.
Printed Electronics World
Mar 11, 2013
Cost is the main differentiator between graphene and other nanocarbons

Cost is the main differentiator between graphene and other nanocarbons

Graphene, an atom-thin layer of carbon, is transparent enough to see through yet can stretch up to 20 percent of its length.
Printed Electronics World
Mar 8, 2013
Integration challenges for graphene and carbon nanotubes

Integration challenges for graphene and carbon nanotubes

The world has experienced miraculous developments during the last decade harvested from fullerenes, carbon nanotubes (CNTs) and today graphene.
Printed Electronics World
Mar 6, 2013
Xolve's graphene technology to change composite price/performance

Xolve's graphene technology to change composite price/performance

Nanotechnology has long offered the promise of wonderful new materials and vast improvements in the essentials of modern life. To date, however, this technology has been accused of falling short of such potential. In spite of billions invested in nanomaterials research, no life-changing nano products have made their way to market.
Printed Electronics World
Mar 5, 2013
Graphene Special Edition - commercial potentials and challenges

Graphene Special Edition - commercial potentials and challenges

IDTechEx Research is launching a special edition dedicated to graphene on its Printed Electronics World online journal. For two consecutive weeks, you will read invited articles outlining the views of select industry and academic players about the commercial potential and challenges facing the emerging graphene industry.
Printed Electronics World
Mar 4, 2013
Air Force supports study on nanopaper for electronics, aircraft

Air Force supports study on nanopaper for electronics, aircraft

Like ordinary paper, nanopaper is made of wood pulp, but reconstructed at the nanoscale to enhance its properties.
External Company Press Release
Fully integrated JetXpert print station now available from ImageXpert

Fully integrated JetXpert print station now available from ImageXpert

Building on the market-leading success of the JetXpert platform for analysis of drops-in-flight, ImageXpert is now offering a JetXpert system with integrated print station.
Printed Electronics World
Mar 1, 2013
INTRASME Electric Vehicle Opportunity Workshop

INTRASME Electric Vehicle Opportunity Workshop

IDTechEx is delighted to host the first INTRASME Electric Vehicle Opportunity Workshop 2013 which will now be a free session for a full day.
Printed Electronics World
Feb 26, 2013
Graphene could lead to faster-charging batteries for electric vehicles

Graphene could lead to faster-charging batteries for electric vehicles

An agreement will allow Vorbeck to bring lithium batteries incorporating Vor-x graphene technology to market for use in consumer portable electronic and medical devices, tools and electric vehicles.
More IDTechEx Journals