Hosted by IDTechEx
External Company Press Release
Advantech US, Inc: Bridging the chip to PCB gap

Advantech US, Inc: Bridging the chip to PCB gap

Advantech US has introduced a printing technology for the microelectronic industry to additively manufacture electronic sensors, devices, and circuits for fine features down to 5 µm in size.
Printed Electronics World
Nov 13, 2013
Meet adopters at Printed Electronics USA

Meet adopters at Printed Electronics USA

Next week the IDTechEx Printed Electronics USA 2013 event (www.PrintedElectronicsUSA.com ) will open in Santa Clara, CA, to more than 160 exhibitors and over 1,800 pre-registered attendees. The event, which is over 20% bigger than last year at this point - with several hundred more people expected, also features over 200 presentations.
External Company Press Release
The story behind the world's first large-scale R2R pulsed light sinter

The story behind the world's first large-scale R2R pulsed light sinter

At this year's Printed Electronics USA show in Santa Clara, XENON Corporation is featuring a breakthrough in PE technology: a live demonstration of the SINTERON™ 5000, the world's first large-scale R2R pulsed light sintering system.
External Company Press Release
Optically clear polyester films for touch sensors

Optically clear polyester films for touch sensors

DuPont Teijin Films (DTF) is introducing a new series of clear films for the flexible electronics market, designed to reduce haze and eliminate the iridescence commonly found with polymer films containing refractive index mismatched coating layers.
IDTechEx Research Subscribers
Supercapacitors II - market forecasts

Supercapacitors II - market forecasts

In a recent premium article, IDTechEx Research gave an initial assessment of the supercapacitor market globally. In the second part of this article series, IDTechEx Research offers its market projections for this fast-growing technology. As always, IDTechEx Research provides detailed reality checks on its forecasts.
Printed Electronics World
Nov 12, 2013
Plastic image sensor to be demonstrated at Printed Electronics USA

Plastic image sensor to be demonstrated at Printed Electronics USA

ISORG will demonstrate a working plastic image sensor at Printed Electronics USA next week in Santa Clara. The device was developed in collaboration with Plastic Logic, combining ISORG's organic photodetectors (OPD) with Plastic Logic's organic thin-film transistor (OTFT) backplane.
Printed Electronics World
Nov 12, 2013
Inkjet-based circuits at fraction of time and cost

Inkjet-based circuits at fraction of time and cost

Researchers from Georgia Tech, the University of Tokyo and Microsoft Research have developed a novel method to rapidly and cheaply make electrical circuits by printing them with commodity inkjet printers and off-the-shelf materials.
Printed Electronics World
Nov 7, 2013
Organic lights and solar cells straight from the printer

Organic lights and solar cells straight from the printer

Flickering façades, curved monitors, flashing clothing, fluorescent wallpaper, flexible solar cells - and all printable.
Printed Electronics World
Nov 6, 2013
The IDTechEx Market Intelligence Portal grows rapidly

The IDTechEx Market Intelligence Portal grows rapidly

Annual subscriptions to the IDTechEx Market Intelligence Portal provide online access to in-depth market intelligence and independent analysis throughout the year.
Printed Electronics World
Nov 6, 2013
A flexible battery made with carbon nanotubes

A flexible battery made with carbon nanotubes

Researchers have developed a flexible battery made with carbon nanotubes that could potentially power electronic devices with flexible displays.
IDTechEx Research Subscribers
The RFID Market and the Opportunity for Printed Electronics (2)

The RFID Market and the Opportunity for Printed Electronics (2)

In the previous article we looked at the size of the RFID market and how printed electronics was impacting the manufacturing of antennas for RFID tags. In this article, IDTechEx explores the latest progress in replacing the silicon chip in an RFID tag.
Printed Electronics World
Nov 5, 2013
ITRI and Komori announce new fine-line printing technology

ITRI and Komori announce new fine-line printing technology

ITRI and Komori International recently announced a completely new fine-line printing technology that replaces the need of seven different pieces of equipment with a single direct-printing station.
Printed Electronics World
Nov 4, 2013
Invesco funds invest additional $24 million in Thinfilm

Invesco funds invest additional $24 million in Thinfilm

Thin Film Electronics ASA has announced that funds managed by Invesco Asset Management Limited have agreed to acquire 46,666,666 shares in the Company at a subscription price of NOK 3.00 per share totaling NOK 140 million (USD $24 million).
Printed Electronics World
Nov 1, 2013
Collaboration to produce carbon nanotubes and graphene

Collaboration to produce carbon nanotubes and graphene

Felda Global Ventures Holdings Bhd (FGV) has collaborated with UK's Cambridge University scientists to to produce the world's first high-grade carbon nanotubes and graphene.
Printed Electronics World
Oct 31, 2013
Seamless integrated circuits etched on graphene

Seamless integrated circuits etched on graphene

Researchers have introduced and modeled an integrated circuit design scheme in which transistors and interconnects are monolithically patterned seamlessly on a sheet of graphene, a 2-dimensional plane of carbon atoms.
Printed Electronics World
Oct 30, 2013
See How to Print Electronics - Live at Printed Electronics USA

See How to Print Electronics - Live at Printed Electronics USA

The world's biggest event on Printed Electronics - the IDTechEx Printed Electronics USA 2013 show held in Santa Clara, Ca on Nov 20-21 - will feature "Manufacturing Street" - a live, multi-technology, printed electronics demonstration www.PrintedElectronicsUSA.com.
Printed Electronics World
Oct 30, 2013
The problem with 3D printing

The problem with 3D printing

DTechEx forecasts, in its new report "3D Printing Materials 2014-2025: Status, Opportunities, Market Forecasts", a market value of $615m in 2025.
IDTechEx Research Subscribers
The RFID Market and the Opportunity for Printed Electronics (I)

The RFID Market and the Opportunity for Printed Electronics (I)

The market for RFID has grown steadily despite the economic meltdown due to the diverse nature of its applications from tagging retail apparel to transport ticketing to animals.
Printed Electronics World
Oct 29, 2013
Industrial Institute of Printed Electronics

Industrial Institute of Printed Electronics

hina is making progress in the development of Printed Electronics by establishing an Industrial Institute of Printed Electronics in September 2013.
Printed Electronics World
Oct 28, 2013
Transparent conductive films, ultra-low reflection, record flexibility

Transparent conductive films, ultra-low reflection, record flexibility

Canatu recently launched its new Generation 5 product family of CNB™ transparent conductive films for touch sensors, paving the way for high-contrast touch displays and revolutionary printed, flexible, foldable and 3D-shaped touch-enabled electronics products.
External Company Press Release
Advantech US, Inc: Bridging the chip to PCB gap

Advantech US, Inc: Bridging the chip to PCB gap

Advantech US has introduced a printing technology for the microelectronic industry to additively manufacture electronic sensors, devices, and circuits for fine features down to 5 µm in size.
External Company Press Release
The story behind the world's first large-scale R2R pulsed light sinter

The story behind the world's first large-scale R2R pulsed light sinter

At this year's Printed Electronics USA show in Santa Clara, XENON Corporation is featuring a breakthrough in PE technology: a live demonstration of the SINTERON™ 5000, the world's first large-scale R2R pulsed light sintering system.
IDTechEx Research Subscribers
Supercapacitors II - market forecasts

Supercapacitors II - market forecasts

In a recent premium article, IDTechEx Research gave an initial assessment of the supercapacitor market globally. In the second part of this article series, IDTechEx Research offers its market projections for this fast-growing technology. As always, IDTechEx Research provides detailed reality checks on its forecasts.
Printed Electronics World
Nov 12, 2013
Inkjet-based circuits at fraction of time and cost

Inkjet-based circuits at fraction of time and cost

Researchers from Georgia Tech, the University of Tokyo and Microsoft Research have developed a novel method to rapidly and cheaply make electrical circuits by printing them with commodity inkjet printers and off-the-shelf materials.
Printed Electronics World
Nov 6, 2013
The IDTechEx Market Intelligence Portal grows rapidly

The IDTechEx Market Intelligence Portal grows rapidly

Annual subscriptions to the IDTechEx Market Intelligence Portal provide online access to in-depth market intelligence and independent analysis throughout the year.
IDTechEx Research Subscribers
The RFID Market and the Opportunity for Printed Electronics (2)

The RFID Market and the Opportunity for Printed Electronics (2)

In the previous article we looked at the size of the RFID market and how printed electronics was impacting the manufacturing of antennas for RFID tags. In this article, IDTechEx explores the latest progress in replacing the silicon chip in an RFID tag.
Printed Electronics World
Nov 4, 2013
Invesco funds invest additional $24 million in Thinfilm

Invesco funds invest additional $24 million in Thinfilm

Thin Film Electronics ASA has announced that funds managed by Invesco Asset Management Limited have agreed to acquire 46,666,666 shares in the Company at a subscription price of NOK 3.00 per share totaling NOK 140 million (USD $24 million).
Printed Electronics World
Oct 31, 2013
Seamless integrated circuits etched on graphene

Seamless integrated circuits etched on graphene

Researchers have introduced and modeled an integrated circuit design scheme in which transistors and interconnects are monolithically patterned seamlessly on a sheet of graphene, a 2-dimensional plane of carbon atoms.
Printed Electronics World
Oct 30, 2013
The problem with 3D printing

The problem with 3D printing

DTechEx forecasts, in its new report "3D Printing Materials 2014-2025: Status, Opportunities, Market Forecasts", a market value of $615m in 2025.
Printed Electronics World
Oct 29, 2013
Industrial Institute of Printed Electronics

Industrial Institute of Printed Electronics

hina is making progress in the development of Printed Electronics by establishing an Industrial Institute of Printed Electronics in September 2013.
Printed Electronics World
Nov 13, 2013
Meet adopters at Printed Electronics USA

Meet adopters at Printed Electronics USA

Next week the IDTechEx Printed Electronics USA 2013 event (www.PrintedElectronicsUSA.com ) will open in Santa Clara, CA, to more than 160 exhibitors and over 1,800 pre-registered attendees. The event, which is over 20% bigger than last year at this point - with several hundred more people expected, also features over 200 presentations.
External Company Press Release
Optically clear polyester films for touch sensors

Optically clear polyester films for touch sensors

DuPont Teijin Films (DTF) is introducing a new series of clear films for the flexible electronics market, designed to reduce haze and eliminate the iridescence commonly found with polymer films containing refractive index mismatched coating layers.
Printed Electronics World
Nov 12, 2013
Plastic image sensor to be demonstrated at Printed Electronics USA

Plastic image sensor to be demonstrated at Printed Electronics USA

ISORG will demonstrate a working plastic image sensor at Printed Electronics USA next week in Santa Clara. The device was developed in collaboration with Plastic Logic, combining ISORG's organic photodetectors (OPD) with Plastic Logic's organic thin-film transistor (OTFT) backplane.
Printed Electronics World
Nov 7, 2013
Organic lights and solar cells straight from the printer

Organic lights and solar cells straight from the printer

Flickering façades, curved monitors, flashing clothing, fluorescent wallpaper, flexible solar cells - and all printable.
Printed Electronics World
Nov 6, 2013
A flexible battery made with carbon nanotubes

A flexible battery made with carbon nanotubes

Researchers have developed a flexible battery made with carbon nanotubes that could potentially power electronic devices with flexible displays.
Printed Electronics World
Nov 5, 2013
ITRI and Komori announce new fine-line printing technology

ITRI and Komori announce new fine-line printing technology

ITRI and Komori International recently announced a completely new fine-line printing technology that replaces the need of seven different pieces of equipment with a single direct-printing station.
Printed Electronics World
Nov 1, 2013
Collaboration to produce carbon nanotubes and graphene

Collaboration to produce carbon nanotubes and graphene

Felda Global Ventures Holdings Bhd (FGV) has collaborated with UK's Cambridge University scientists to to produce the world's first high-grade carbon nanotubes and graphene.
Printed Electronics World
Oct 30, 2013
See How to Print Electronics - Live at Printed Electronics USA

See How to Print Electronics - Live at Printed Electronics USA

The world's biggest event on Printed Electronics - the IDTechEx Printed Electronics USA 2013 show held in Santa Clara, Ca on Nov 20-21 - will feature "Manufacturing Street" - a live, multi-technology, printed electronics demonstration www.PrintedElectronicsUSA.com.
IDTechEx Research Subscribers
The RFID Market and the Opportunity for Printed Electronics (I)

The RFID Market and the Opportunity for Printed Electronics (I)

The market for RFID has grown steadily despite the economic meltdown due to the diverse nature of its applications from tagging retail apparel to transport ticketing to animals.
Printed Electronics World
Oct 28, 2013
Transparent conductive films, ultra-low reflection, record flexibility

Transparent conductive films, ultra-low reflection, record flexibility

Canatu recently launched its new Generation 5 product family of CNB™ transparent conductive films for touch sensors, paving the way for high-contrast touch displays and revolutionary printed, flexible, foldable and 3D-shaped touch-enabled electronics products.
More IDTechEx Journals