Hosted by IDTechEx
Printed Electronics World
Dec 17, 2013
Nanotubes can solder themselves, markedly improving device performance

Nanotubes can solder themselves, markedly improving device performance

Researchers have developed a way to heal gaps in wires too small for even the world's tiniest soldering iron.
IDTechEx Research Subscribers
The future of printed piezoresistive sensors

The future of printed piezoresistive sensors

Sensing is an increasingly important application in printed electronics, partly because printed sensors can enable new ways to interact with machines and smart devices. In this article, IDTechEx takes a closer look at a well-established printed sensor technology: printed piezoresistive sensors.
Printed Electronics World
Dec 12, 2013
Ultrathin diagnostic skin allows continuous patient monitoring

Ultrathin diagnostic skin allows continuous patient monitoring

An international multidisciplinary team has developed an entirely new approach: a sophisticated "electronic skin" that adheres non-invasively to human skin, conforms well to contours, and provides a detailed temperature map of any surface of the body.
Printed Electronics World
Dec 11, 2013
Feedback from Printed Electronics USA 2013

Feedback from Printed Electronics USA 2013

The IDTechEx Printed Electronics USA event in Santa Clara in November was attended by approximately 2,200 people and featured 160 exhibitors. The following is some of the feedback from the event, which will be held again in Santa Clara in 2014 on November 19 and 20. Exhibition space is being pre-booked now.
Printed Electronics World
Dec 11, 2013
Contract to advance fully printed transistor technology

Contract to advance fully printed transistor technology

Optomec has announced that the company was awarded a contract by the Air Force Research Lab to advance its Aerosol Jet technology for printed electronics.
IDTechEx Research Subscribers
International Display Workshop IDW Japan 2013: Conference Findings

International Display Workshop IDW Japan 2013: Conference Findings

IDTechEx has spent ten days in Japan this month in order to meet with companies to learn of the latest progress with printed electronics and related technologies. We also attended the IDW 2013 conference in Sapporo, Japan. This article summarises some of the relevant presentations given.
Printed Electronics World
Dec 10, 2013
SmartKem joint development agreement with Asian display manufacturer

SmartKem joint development agreement with Asian display manufacturer

SmartKem Ltd are pleased to announce the signing of a joint development agreement with a major Asian display original equipment manufacturer for the manufacture of advanced flexible displays.
Printed Electronics World
Dec 9, 2013
3D Printing Live!

3D Printing Live!

Our new 3D Printing Live! conference, which took place in Santa Clara on November 20 & 21, was very well received.
Printed Electronics World
Dec 6, 2013
Findings at Supercapacitors USA 2013

Findings at Supercapacitors USA 2013

This third edition of IDTechEx's Supercapacitors event was held in Santa Clara, California on 20-21 November.
Printed Electronics World
Dec 6, 2013
3-D printing of lithium-ion technology

3-D printing of lithium-ion technology

Although the technology is still at an early stage, the ability to print batteries and other electronics could make it possible to manufacture new kinds of devices.
Printed Electronics World
Dec 5, 2013
'Clean-on-Demand' film for roll-to-roll flexible electronics

'Clean-on-Demand' film for roll-to-roll flexible electronics

As part of the EU-funded, Holst Centre-coordinated Clean4Yield project, DuPont Teijin Films (DTF) is developing a new 'Clean-on-Demand' PET polyester film that could boost yields and cut costs for roll-to-roll (R2R) production of flexible electronics.
Printed Electronics World
Dec 4, 2013
End-user perspectives on the future of 3D printing

End-user perspectives on the future of 3D printing

A recent aerospace-led event presented some of the current thinking of European companies on the subject of 3D printing.
Printed Electronics World
Dec 4, 2013
Graphene LIVE USA 2013

Graphene LIVE USA 2013

Graphene LIVE! USA was a huge success. It brought together 30 top-class speakers and 16 graphene exhibitors, giving them access to a pool of more than 2,000 business-oriented attendees and 160+ exhibiting companies.
Printed Electronics World
Dec 3, 2013
IDTechEx Webinar- 3D Printing Materials: Status, Applications, Markets

IDTechEx Webinar- 3D Printing Materials: Status, Applications, Markets

IDTechEx will be hosting a free webinar '3D printing materials: status, applications and markets' on Wednesday 11 December and we would be delighted if you could join us.
Printed Electronics World
Dec 3, 2013
Printed electronics process could support wafer-thin paper keyboards

Printed electronics process could support wafer-thin paper keyboards

Nordic Semiconductor ASA has announced that Novalia has developed a low-cost, patented manufacturing technology using standard print processes combined with capacitive touch technology, that would allow Bluetooth low energy wireless control to be added to everyday low cost materials such as paper, card, and plastic, for potentially just a few dollars in high volume.
Printed Electronics World
Nov 29, 2013
Peptide-based nanotechnology applied to smartphones and tablets

Peptide-based nanotechnology applied to smartphones and tablets

StoreDot Ltd., a nanotechnology startup company which has discovered the first bio-organic Nanodots, has announced that it has received $6 million from several strategic and private investors.
Printed Electronics World
Nov 28, 2013
Major development programs for organic imaging

Major development programs for organic imaging

NikkoIA SAS announces the grant of several collaborative development programs in 2013, totaling more than 1.5 million Euros of cumulated subsidies over the next 2 years to sustain its development roadmap.
Printed Electronics World
Nov 28, 2013
$1.4m grant for large-scale production of carbon nanotube materials

$1.4m grant for large-scale production of carbon nanotube materials

Florida State researchers have been awarded more than $1.4 million from the National Science Foundation to develop a system that will produce large amounts of a state-of-the-art material made from carbon nanotubes that researchers believe could transform everything from the way airplanes are built to how prosthetic limbs fit the human body.
Printed Electronics World
Nov 27, 2013
Success of Printed Electronics USA

Success of Printed Electronics USA

Last week the annual IDTechEx Printed Electronics USA event featured 160 exhibiting companies, over 200 presentations and approximately 2,200 attendees. Exhibitor attendance grew by over 50% and attendees grew by over 35% compared to the previous year.
External Company Press Release
Rolith, Inc. wins the 2013 Best Manufacturing Technology Award

Rolith, Inc. wins the 2013 Best Manufacturing Technology Award

Rolith, Inc. is pleased to announce that Printed Electronics Industry selected Rolith for the Best Manufacturing Technology award based on its production of transparent metal mesh conductors for large touch screen displays, OLED lighting and photovoltaics.
Printed Electronics World
Dec 17, 2013
Nanotubes can solder themselves, markedly improving device performance

Nanotubes can solder themselves, markedly improving device performance

Researchers have developed a way to heal gaps in wires too small for even the world's tiniest soldering iron.
Printed Electronics World
Dec 12, 2013
Ultrathin diagnostic skin allows continuous patient monitoring

Ultrathin diagnostic skin allows continuous patient monitoring

An international multidisciplinary team has developed an entirely new approach: a sophisticated "electronic skin" that adheres non-invasively to human skin, conforms well to contours, and provides a detailed temperature map of any surface of the body.
Printed Electronics World
Dec 11, 2013
Contract to advance fully printed transistor technology

Contract to advance fully printed transistor technology

Optomec has announced that the company was awarded a contract by the Air Force Research Lab to advance its Aerosol Jet technology for printed electronics.
Printed Electronics World
Dec 10, 2013
SmartKem joint development agreement with Asian display manufacturer

SmartKem joint development agreement with Asian display manufacturer

SmartKem Ltd are pleased to announce the signing of a joint development agreement with a major Asian display original equipment manufacturer for the manufacture of advanced flexible displays.
Printed Electronics World
Dec 6, 2013
Findings at Supercapacitors USA 2013

Findings at Supercapacitors USA 2013

This third edition of IDTechEx's Supercapacitors event was held in Santa Clara, California on 20-21 November.
Printed Electronics World
Dec 5, 2013
'Clean-on-Demand' film for roll-to-roll flexible electronics

'Clean-on-Demand' film for roll-to-roll flexible electronics

As part of the EU-funded, Holst Centre-coordinated Clean4Yield project, DuPont Teijin Films (DTF) is developing a new 'Clean-on-Demand' PET polyester film that could boost yields and cut costs for roll-to-roll (R2R) production of flexible electronics.
Printed Electronics World
Dec 4, 2013
Graphene LIVE USA 2013

Graphene LIVE USA 2013

Graphene LIVE! USA was a huge success. It brought together 30 top-class speakers and 16 graphene exhibitors, giving them access to a pool of more than 2,000 business-oriented attendees and 160+ exhibiting companies.
Printed Electronics World
Dec 3, 2013
Printed electronics process could support wafer-thin paper keyboards

Printed electronics process could support wafer-thin paper keyboards

Nordic Semiconductor ASA has announced that Novalia has developed a low-cost, patented manufacturing technology using standard print processes combined with capacitive touch technology, that would allow Bluetooth low energy wireless control to be added to everyday low cost materials such as paper, card, and plastic, for potentially just a few dollars in high volume.
Printed Electronics World
Nov 28, 2013
Major development programs for organic imaging

Major development programs for organic imaging

NikkoIA SAS announces the grant of several collaborative development programs in 2013, totaling more than 1.5 million Euros of cumulated subsidies over the next 2 years to sustain its development roadmap.
Printed Electronics World
Nov 27, 2013
Success of Printed Electronics USA

Success of Printed Electronics USA

Last week the annual IDTechEx Printed Electronics USA event featured 160 exhibiting companies, over 200 presentations and approximately 2,200 attendees. Exhibitor attendance grew by over 50% and attendees grew by over 35% compared to the previous year.
IDTechEx Research Subscribers
The future of printed piezoresistive sensors

The future of printed piezoresistive sensors

Sensing is an increasingly important application in printed electronics, partly because printed sensors can enable new ways to interact with machines and smart devices. In this article, IDTechEx takes a closer look at a well-established printed sensor technology: printed piezoresistive sensors.
Printed Electronics World
Dec 11, 2013
Feedback from Printed Electronics USA 2013

Feedback from Printed Electronics USA 2013

The IDTechEx Printed Electronics USA event in Santa Clara in November was attended by approximately 2,200 people and featured 160 exhibitors. The following is some of the feedback from the event, which will be held again in Santa Clara in 2014 on November 19 and 20. Exhibition space is being pre-booked now.
IDTechEx Research Subscribers
International Display Workshop IDW Japan 2013: Conference Findings

International Display Workshop IDW Japan 2013: Conference Findings

IDTechEx has spent ten days in Japan this month in order to meet with companies to learn of the latest progress with printed electronics and related technologies. We also attended the IDW 2013 conference in Sapporo, Japan. This article summarises some of the relevant presentations given.
Printed Electronics World
Dec 9, 2013
3D Printing Live!

3D Printing Live!

Our new 3D Printing Live! conference, which took place in Santa Clara on November 20 & 21, was very well received.
Printed Electronics World
Dec 6, 2013
3-D printing of lithium-ion technology

3-D printing of lithium-ion technology

Although the technology is still at an early stage, the ability to print batteries and other electronics could make it possible to manufacture new kinds of devices.
Printed Electronics World
Dec 4, 2013
End-user perspectives on the future of 3D printing

End-user perspectives on the future of 3D printing

A recent aerospace-led event presented some of the current thinking of European companies on the subject of 3D printing.
Printed Electronics World
Dec 3, 2013
IDTechEx Webinar- 3D Printing Materials: Status, Applications, Markets

IDTechEx Webinar- 3D Printing Materials: Status, Applications, Markets

IDTechEx will be hosting a free webinar '3D printing materials: status, applications and markets' on Wednesday 11 December and we would be delighted if you could join us.
Printed Electronics World
Nov 29, 2013
Peptide-based nanotechnology applied to smartphones and tablets

Peptide-based nanotechnology applied to smartphones and tablets

StoreDot Ltd., a nanotechnology startup company which has discovered the first bio-organic Nanodots, has announced that it has received $6 million from several strategic and private investors.
Printed Electronics World
Nov 28, 2013
$1.4m grant for large-scale production of carbon nanotube materials

$1.4m grant for large-scale production of carbon nanotube materials

Florida State researchers have been awarded more than $1.4 million from the National Science Foundation to develop a system that will produce large amounts of a state-of-the-art material made from carbon nanotubes that researchers believe could transform everything from the way airplanes are built to how prosthetic limbs fit the human body.
External Company Press Release
Rolith, Inc. wins the 2013 Best Manufacturing Technology Award

Rolith, Inc. wins the 2013 Best Manufacturing Technology Award

Rolith, Inc. is pleased to announce that Printed Electronics Industry selected Rolith for the Best Manufacturing Technology award based on its production of transparent metal mesh conductors for large touch screen displays, OLED lighting and photovoltaics.
More IDTechEx Journals