

Printed Electronics World
Dec 30, 2013

Scientists untangle nanotubes to release their potential in electronic
Researchers have demonstrated how to produce electronic inks for the development of new applications using the 'wonder material', carbon nanotubes.
Printed Electronics World
Dec 27, 2013

Graphene can host exotic new quantum electronic states at its edges
Under an extremely powerful magnetic field and at extremely low temperature, the researchers found, graphene can effectively filter electrons according to the direction of their spin, something that cannot be done by any conventional electronic system.
Printed Electronics World
Dec 26, 2013

Graphene sees the light
Researchers believe that graphene could be used as a transparent electrode in photovoltaic cells, replacing a layer of indium tin oxide (ITO) that is brittle and becoming increasingly expensive.
Printed Electronics World
Dec 24, 2013

World's first all-inkjet-printed OPVs
Scientists have produced the world's first organic photovoltaics (OPVs) to be made exclusively with inkjet printing processes.
Printed Electronics World
Dec 23, 2013

T-ink enables new Printed Electronics feature in WIRED Magazine
A print ad in the January issue of Wired provides interactivity thanks to printed electronics.
Printed Electronics World
Dec 20, 2013

Collaboration produces flexible silver nanowire film for touch screens
3M announces the launch of a new touch sensor film, 3M™ Patterned Silver Nanowire Film.
Printed Electronics World
Dec 20, 2013

Flexible li-ion battery revealed
A new ultra-thin, malleable lithium-ion variant with a high capacity.
Printed Electronics World
Dec 19, 2013

Cholesterol-tracking smartphone users take lifesaving selfies
With a new smartphone device, you can now take an accurate iPhone camera selfie that could save your life - it reads your cholesterol level in about a minute.
Printed Electronics World
Dec 18, 2013

Crystal film growth: nanosheets extend epitaxial growth applications
Molecularly thin two-dimensional crystals can alleviate the lattice matching restrictions of epitaxial crystalline thin film growth, as reported by researchers in Japan.
Printed Electronics World
Dec 17, 2013

Nanotubes can solder themselves, markedly improving device performance
Researchers have developed a way to heal gaps in wires too small for even the world's tiniest soldering iron.
IDTechEx Research Subscribers

The future of printed piezoresistive sensors
Sensing is an increasingly important application in printed electronics, partly because printed sensors can enable new ways to interact with machines and smart devices. In this article, IDTechEx takes a closer look at a well-established printed sensor technology: printed piezoresistive sensors.
Printed Electronics World
Dec 12, 2013

Ultrathin diagnostic skin allows continuous patient monitoring
An international multidisciplinary team has developed an entirely new approach: a sophisticated "electronic skin" that adheres non-invasively to human skin, conforms well to contours, and provides a detailed temperature map of any surface of the body.
Printed Electronics World
Dec 11, 2013

Feedback from Printed Electronics USA 2013
The IDTechEx Printed Electronics USA event in Santa Clara in November was attended by approximately 2,200 people and featured 160 exhibitors. The following is some of the feedback from the event, which will be held again in Santa Clara in 2014 on November 19 and 20. Exhibition space is being pre-booked now.
Printed Electronics World
Dec 11, 2013

Contract to advance fully printed transistor technology
Optomec has announced that the company was awarded a contract by the Air Force Research Lab to advance its Aerosol Jet technology for printed electronics.
IDTechEx Research Subscribers
International Display Workshop IDW Japan 2013: Conference Findings
IDTechEx has spent ten days in Japan this month in order to meet with companies to learn of the latest progress with printed electronics and related technologies. We also attended the IDW 2013 conference in Sapporo, Japan. This article summarises some of the relevant presentations given.
Printed Electronics World
Dec 10, 2013

SmartKem joint development agreement with Asian display manufacturer
SmartKem Ltd are pleased to announce the signing of a joint development agreement with a major Asian display original equipment manufacturer for the manufacture of advanced flexible displays.
Printed Electronics World
Dec 9, 2013

3D Printing Live!
Our new 3D Printing Live! conference, which took place in Santa Clara on November 20 & 21, was very well received.
Printed Electronics World
Dec 6, 2013

Findings at Supercapacitors USA 2013
This third edition of IDTechEx's Supercapacitors event was held in Santa Clara, California on 20-21 November.
Printed Electronics World
Dec 6, 2013

3-D printing of lithium-ion technology
Although the technology is still at an early stage, the ability to print batteries and other electronics could make it possible to manufacture new kinds of devices.
Printed Electronics World
Dec 30, 2013

Scientists untangle nanotubes to release their potential in electronic
Researchers have demonstrated how to produce electronic inks for the development of new applications using the 'wonder material', carbon nanotubes.
Printed Electronics World
Dec 26, 2013

Graphene sees the light
Researchers believe that graphene could be used as a transparent electrode in photovoltaic cells, replacing a layer of indium tin oxide (ITO) that is brittle and becoming increasingly expensive.
Printed Electronics World
Dec 23, 2013

T-ink enables new Printed Electronics feature in WIRED Magazine
A print ad in the January issue of Wired provides interactivity thanks to printed electronics.
Printed Electronics World
Dec 20, 2013

Flexible li-ion battery revealed
A new ultra-thin, malleable lithium-ion variant with a high capacity.
Printed Electronics World
Dec 18, 2013

Crystal film growth: nanosheets extend epitaxial growth applications
Molecularly thin two-dimensional crystals can alleviate the lattice matching restrictions of epitaxial crystalline thin film growth, as reported by researchers in Japan.
IDTechEx Research Subscribers

The future of printed piezoresistive sensors
Sensing is an increasingly important application in printed electronics, partly because printed sensors can enable new ways to interact with machines and smart devices. In this article, IDTechEx takes a closer look at a well-established printed sensor technology: printed piezoresistive sensors.
Printed Electronics World
Dec 11, 2013

Feedback from Printed Electronics USA 2013
The IDTechEx Printed Electronics USA event in Santa Clara in November was attended by approximately 2,200 people and featured 160 exhibitors. The following is some of the feedback from the event, which will be held again in Santa Clara in 2014 on November 19 and 20. Exhibition space is being pre-booked now.
IDTechEx Research Subscribers
International Display Workshop IDW Japan 2013: Conference Findings
IDTechEx has spent ten days in Japan this month in order to meet with companies to learn of the latest progress with printed electronics and related technologies. We also attended the IDW 2013 conference in Sapporo, Japan. This article summarises some of the relevant presentations given.
Printed Electronics World
Dec 9, 2013

3D Printing Live!
Our new 3D Printing Live! conference, which took place in Santa Clara on November 20 & 21, was very well received.
Printed Electronics World
Dec 6, 2013

3-D printing of lithium-ion technology
Although the technology is still at an early stage, the ability to print batteries and other electronics could make it possible to manufacture new kinds of devices.
Printed Electronics World
Dec 27, 2013

Graphene can host exotic new quantum electronic states at its edges
Under an extremely powerful magnetic field and at extremely low temperature, the researchers found, graphene can effectively filter electrons according to the direction of their spin, something that cannot be done by any conventional electronic system.
Printed Electronics World
Dec 24, 2013

World's first all-inkjet-printed OPVs
Scientists have produced the world's first organic photovoltaics (OPVs) to be made exclusively with inkjet printing processes.
Printed Electronics World
Dec 20, 2013

Collaboration produces flexible silver nanowire film for touch screens
3M announces the launch of a new touch sensor film, 3M™ Patterned Silver Nanowire Film.
Printed Electronics World
Dec 19, 2013

Cholesterol-tracking smartphone users take lifesaving selfies
With a new smartphone device, you can now take an accurate iPhone camera selfie that could save your life - it reads your cholesterol level in about a minute.
Printed Electronics World
Dec 17, 2013

Nanotubes can solder themselves, markedly improving device performance
Researchers have developed a way to heal gaps in wires too small for even the world's tiniest soldering iron.
Printed Electronics World
Dec 12, 2013

Ultrathin diagnostic skin allows continuous patient monitoring
An international multidisciplinary team has developed an entirely new approach: a sophisticated "electronic skin" that adheres non-invasively to human skin, conforms well to contours, and provides a detailed temperature map of any surface of the body.
Printed Electronics World
Dec 11, 2013

Contract to advance fully printed transistor technology
Optomec has announced that the company was awarded a contract by the Air Force Research Lab to advance its Aerosol Jet technology for printed electronics.
Printed Electronics World
Dec 10, 2013

SmartKem joint development agreement with Asian display manufacturer
SmartKem Ltd are pleased to announce the signing of a joint development agreement with a major Asian display original equipment manufacturer for the manufacture of advanced flexible displays.
Printed Electronics World
Dec 6, 2013

Findings at Supercapacitors USA 2013
This third edition of IDTechEx's Supercapacitors event was held in Santa Clara, California on 20-21 November.