Hosted by IDTechEx
Evonik and Holst Centre enter next phase of joint partnership

Evonik and Holst Centre enter next phase of joint partnership

Printed Electronics World
Sep 30, 2014
Graphene flaws key to creating hypersensitive electronic nose

Graphene flaws key to creating hypersensitive electronic nose

Researchers have discovered a way to create a highly sensitive chemical sensor based on the crystalline flaws in graphene sheets.
IDTechEx Research Subscribers
The technology roadmap for flexible displays

The technology roadmap for flexible displays

In July IDTechEx released its market forecasts for OLED displays, predicting a rapid rise of plastic and flexible displays. Recent announcements from major consumer electronics companies have just confirmed this trend.
Printed Electronics World
Sep 26, 2014
Greener low-cost transistor heralds advance in flexible electronics

Greener low-cost transistor heralds advance in flexible electronics

Researchers report a new, inexpensive and simple way to make transparent, flexible transistors that could help bring roll-up smartphones with see-through displays and other bendable gadgets to consumers in just a few years.
Printed Electronics World
Sep 25, 2014
Innovative touch display solutions with enhanced outdoor readability

Innovative touch display solutions with enhanced outdoor readability

Canatu has announced that it is partnering with Display Solution to collaborate on innovative and disruptive touchscreen technology.
Printed Electronics World
Sep 24, 2014
The Apple Watch is a sign that flexible displays are finally coming

The Apple Watch is a sign that flexible displays are finally coming

The Apple Watch was officially announced earlier this month, with the promise that it will come with a flexible display. However, there is some confusion about what the term means and what the benefits are for consumers. Dr Guillaume Chansin, co-author of the IDTechEx report "OLED Display Forecasts 2014-2024: the rise of plastic and flexible displays" gives his view on flexible displays.
Printed Electronics World
Sep 23, 2014
Greater than 99% semiconducting single-wall carbon nanotubes

Greater than 99% semiconducting single-wall carbon nanotubes

SouthWest NanoTechnologies has received an SBIR Phase 1 Award from the National Institute of Standards and Technology.
Printed Electronics World
Sep 23, 2014
Webinar: Structural Electronics 2015-2025

Webinar: Structural Electronics 2015-2025

IDTechEx are hosting a free webinar on Tuesday 30 September.
Printed Electronics World
Sep 22, 2014
A more efficient, lightweight and low-cost organic solar cell

A more efficient, lightweight and low-cost organic solar cell

Researchers have developed a more efficient, easily processable and lightweight solar cell that can use virtually any metal for the electrode, effectively breaking the "electrode barrier."
Printed Electronics World
Sep 19, 2014
Former Broadcom executive joins MC10 as CEO & President

Former Broadcom executive joins MC10 as CEO & President

MC10 has announced that it has hired former Broadcom executive, Scott Pomerantz as its new Chief Executive Officer and President.
Printed Electronics World
Sep 18, 2014
Structural electronics: a potential $60bn market by 2025

Structural electronics: a potential $60bn market by 2025

Electronics embedded within the structure of bridges, walkways, EVs, aircraft and more, have the potential to be a $60 billion market by 2025.
Printed Electronics World
Sep 17, 2014
Kateeva closes series D round with $38 million in financing

Kateeva closes series D round with $38 million in financing

Kateeva has announced that it has closed its Series D round with $38 million in financing.
IDTechEx Research Subscribers
Wearable Technology: Lessons of History

Wearable Technology: Lessons of History

Many new wearable technologies will appear in luxury designer products and fashion following the modest beginning with non-electronic technology such as artificial diamonds and Swarovsky selling base metal linking glass that is coated with interference layers. High margins await.
Printed Electronics World
Sep 16, 2014
A*STAR's SIMTech to build local capabilities for printed electronics

A*STAR's SIMTech to build local capabilities for printed electronics

A*STAR's Singapore Institute of Manufacturing Technology has launched a Collaborative Industry Project on Roll-to-Roll Manufacturing of Functional Film and Printed Electronics to help companies develop technological and production capabilities in this emerging sector.
Printed Electronics World
Sep 15, 2014
Webinar: Flexible Displays and Flexible Sensors

Webinar: Flexible Displays and Flexible Sensors

IDTechEx are hosting a free webinar on Thursday 25 September discussing flexible displays and flexible sensors.
Printed Electronics World
Sep 15, 2014
Rethinking the basic science of graphene synthesis

Rethinking the basic science of graphene synthesis

A new route to making graphene has been discovered that could make the 21st century's wonder material easier to ramp up to industrial scale.
Printed Electronics World
Sep 12, 2014
Printed RFID Tag from Japanese Consortium

Printed RFID Tag from Japanese Consortium

Under the NEDO project, a group consisting of The University of Tokyo and others successfully transmitted an unique identification signal at a commercial frequency using high performance organic thin film transistor that can be manufactured by print process.
Printed Electronics World
Sep 11, 2014
First graphene-based flexible display produced

First graphene-based flexible display produced

A flexible display incorporating graphene in its pixels' electronics has been successfully demonstrated by the Cambridge Graphene Centre and Plastic Logic, the first time graphene has been used in a transistor-based flexible device.
Printed Electronics World
Sep 10, 2014
ITO replacements: time to take-off or fizzle out

ITO replacements: time to take-off or fizzle out

Over the past five years there have been a large number of companies developing Transparent Conductive Film (TCF) alternatives for Indium Tin Oxide (ITO). Including material providers and film providers, research and events firm IDTechEx has profiled almost 100 organizations working across more than 12 types of transparent conductive film technologies.
IDTechEx Research Subscribers
Smart Wristwatches: Something Missing

Smart Wristwatches: Something Missing

Almost no one wants to wear more than one wrist-mounted device. In fact there has been some trend towards young people abandoning wristwatches because all those functions exist in their carried mobile phone. The trend in mobile phones has been to larger ones. The idea of that functionality being on your wrist goes completely against the trend.
Printed Electronics World
Sep 30, 2014
Graphene flaws key to creating hypersensitive electronic nose

Graphene flaws key to creating hypersensitive electronic nose

Researchers have discovered a way to create a highly sensitive chemical sensor based on the crystalline flaws in graphene sheets.
Printed Electronics World
Sep 26, 2014
Greener low-cost transistor heralds advance in flexible electronics

Greener low-cost transistor heralds advance in flexible electronics

Researchers report a new, inexpensive and simple way to make transparent, flexible transistors that could help bring roll-up smartphones with see-through displays and other bendable gadgets to consumers in just a few years.
Printed Electronics World
Sep 24, 2014
The Apple Watch is a sign that flexible displays are finally coming

The Apple Watch is a sign that flexible displays are finally coming

The Apple Watch was officially announced earlier this month, with the promise that it will come with a flexible display. However, there is some confusion about what the term means and what the benefits are for consumers. Dr Guillaume Chansin, co-author of the IDTechEx report "OLED Display Forecasts 2014-2024: the rise of plastic and flexible displays" gives his view on flexible displays.
Printed Electronics World
Sep 23, 2014
Webinar: Structural Electronics 2015-2025

Webinar: Structural Electronics 2015-2025

IDTechEx are hosting a free webinar on Tuesday 30 September.
Printed Electronics World
Sep 19, 2014
Former Broadcom executive joins MC10 as CEO & President

Former Broadcom executive joins MC10 as CEO & President

MC10 has announced that it has hired former Broadcom executive, Scott Pomerantz as its new Chief Executive Officer and President.
Printed Electronics World
Sep 17, 2014
Kateeva closes series D round with $38 million in financing

Kateeva closes series D round with $38 million in financing

Kateeva has announced that it has closed its Series D round with $38 million in financing.
Printed Electronics World
Sep 16, 2014
A*STAR's SIMTech to build local capabilities for printed electronics

A*STAR's SIMTech to build local capabilities for printed electronics

A*STAR's Singapore Institute of Manufacturing Technology has launched a Collaborative Industry Project on Roll-to-Roll Manufacturing of Functional Film and Printed Electronics to help companies develop technological and production capabilities in this emerging sector.
Printed Electronics World
Sep 15, 2014
Rethinking the basic science of graphene synthesis

Rethinking the basic science of graphene synthesis

A new route to making graphene has been discovered that could make the 21st century's wonder material easier to ramp up to industrial scale.
Printed Electronics World
Sep 11, 2014
First graphene-based flexible display produced

First graphene-based flexible display produced

A flexible display incorporating graphene in its pixels' electronics has been successfully demonstrated by the Cambridge Graphene Centre and Plastic Logic, the first time graphene has been used in a transistor-based flexible device.
IDTechEx Research Subscribers
Smart Wristwatches: Something Missing

Smart Wristwatches: Something Missing

Almost no one wants to wear more than one wrist-mounted device. In fact there has been some trend towards young people abandoning wristwatches because all those functions exist in their carried mobile phone. The trend in mobile phones has been to larger ones. The idea of that functionality being on your wrist goes completely against the trend.
IDTechEx Research Subscribers
The technology roadmap for flexible displays

The technology roadmap for flexible displays

In July IDTechEx released its market forecasts for OLED displays, predicting a rapid rise of plastic and flexible displays. Recent announcements from major consumer electronics companies have just confirmed this trend.
Printed Electronics World
Sep 25, 2014
Innovative touch display solutions with enhanced outdoor readability

Innovative touch display solutions with enhanced outdoor readability

Canatu has announced that it is partnering with Display Solution to collaborate on innovative and disruptive touchscreen technology.
Printed Electronics World
Sep 23, 2014
Greater than 99% semiconducting single-wall carbon nanotubes

Greater than 99% semiconducting single-wall carbon nanotubes

SouthWest NanoTechnologies has received an SBIR Phase 1 Award from the National Institute of Standards and Technology.
Printed Electronics World
Sep 22, 2014
A more efficient, lightweight and low-cost organic solar cell

A more efficient, lightweight and low-cost organic solar cell

Researchers have developed a more efficient, easily processable and lightweight solar cell that can use virtually any metal for the electrode, effectively breaking the "electrode barrier."
Printed Electronics World
Sep 18, 2014
Structural electronics: a potential $60bn market by 2025

Structural electronics: a potential $60bn market by 2025

Electronics embedded within the structure of bridges, walkways, EVs, aircraft and more, have the potential to be a $60 billion market by 2025.
IDTechEx Research Subscribers
Wearable Technology: Lessons of History

Wearable Technology: Lessons of History

Many new wearable technologies will appear in luxury designer products and fashion following the modest beginning with non-electronic technology such as artificial diamonds and Swarovsky selling base metal linking glass that is coated with interference layers. High margins await.
Printed Electronics World
Sep 15, 2014
Webinar: Flexible Displays and Flexible Sensors

Webinar: Flexible Displays and Flexible Sensors

IDTechEx are hosting a free webinar on Thursday 25 September discussing flexible displays and flexible sensors.
Printed Electronics World
Sep 12, 2014
Printed RFID Tag from Japanese Consortium

Printed RFID Tag from Japanese Consortium

Under the NEDO project, a group consisting of The University of Tokyo and others successfully transmitted an unique identification signal at a commercial frequency using high performance organic thin film transistor that can be manufactured by print process.
Printed Electronics World
Sep 10, 2014
ITO replacements: time to take-off or fizzle out

ITO replacements: time to take-off or fizzle out

Over the past five years there have been a large number of companies developing Transparent Conductive Film (TCF) alternatives for Indium Tin Oxide (ITO). Including material providers and film providers, research and events firm IDTechEx has profiled almost 100 organizations working across more than 12 types of transparent conductive film technologies.
More IDTechEx Journals