Hosted by IDTechEx
Large single-crystal graphene is possible!

Large single-crystal graphene is possible!

Printed Electronics World
Jul 27, 2017
Colour-shifting electronic skin

Colour-shifting electronic skin

Researchers have developed a new type of user-interactive electronic skin, with a colour change perceptible to the human eye, and achieved with a much-reduced level of strain. Their results could have applications in robotics, prosthetics and wearable technology.
External Company Press Release
Acquisition of CERADROP hybrid 3D digital deposition platform

Acquisition of CERADROP hybrid 3D digital deposition platform

The University of Texas at San Antonio strengthens multifunctional electronic materials and devices research by acquisition of CERADROP hybrid 3D digital deposition platform.
Printed Electronics World
Jul 25, 2017
Webinar Tuesday 8 August - New Technologies for Metal 3D Printing

Webinar Tuesday 8 August - New Technologies for Metal 3D Printing

IDTechEx is hosting a free webinar 'New Technologies for Metal 3D Printing' on Tuesday 8 August.
Printed Electronics World
Jul 25, 2017
Toppan Forms develops ITO replacement using silver salt ink

Toppan Forms develops ITO replacement using silver salt ink

Toppan Forms Co Ltd has developed a technology for forming printed micro wires, which enables a wire width of 4 micrometers that is almost invisible to the naked eye.
Printed Electronics World
Jul 24, 2017
Simplifying printed electronics

Simplifying printed electronics

A team of researchers has developed a technique for printing flexible electronics that uses laser driven micro-bubbles to write or make patterns on transparent surfaces.
Printed Electronics World
Jul 19, 2017
Breathable, wearable electronics on skin

Breathable, wearable electronics on skin

A hypoallergenic electronic sensor can be worn on the skin continuously for a week without discomfort, and is so light and thin that users forget they even have it on, says a Japanese group of scientists.
External Company Press Release
Eight19 secures 1.3m Pounds funding

Eight19 secures 1.3m Pounds funding

The new investment follows two years of continued improvement in OPV performance, advances in manufacturing readiness and an increased engagement with customers in the retail, FMCG and IoT sectors.
External Company Press Release
Cratus leverages Thinfilm's NFC technology

Cratus leverages Thinfilm's NFC technology

Through the collaboration, Cratus will integrate Thinfilm's technology into mobile sensor platforms, enabling location sensing and tamper-evidence monitoring of high-value goods through the simple tap of a smartphone or commercial reader.
Printed Electronics World
Jul 18, 2017
Dynamic templates critical to printable electronics technology

Dynamic templates critical to printable electronics technology

When it comes to efficiency, sometimes it helps to look to Mother Nature for advice - even in technology as advanced as printable, flexible electronics.
Printed Electronics World
Jul 17, 2017
Webinar Thursday 3 August - Opportunities for LPWAN Technologies

Webinar Thursday 3 August - Opportunities for LPWAN Technologies

IDTechEx is hosting a free webinar on opportunities for LPWAN technologies on Thursday 3 August.
Printed Electronics World
Jul 17, 2017
Composites, Drones & LPWAN IDTechEx #TechRoundUp

Composites, Drones & LPWAN IDTechEx #TechRoundUp

Dr Richard Collins et al. discuss composites and their uses in drones and enabling internet infrastructure.
Printed Electronics World
Jul 17, 2017
Low-cost smart glove translates American Sign Language into text

Low-cost smart glove translates American Sign Language into text

Engineers have developed a smart glove that wirelessly translates the American Sign Language alphabet into text and controls a virtual hand to mimic sign language gestures.
Printed Electronics World
Jul 14, 2017
Sprayable sensing network technology

Sprayable sensing network technology

The sprayed sensors can be networked, to render rich real-time information on the health status of the structure under monitoring.
Printed Electronics World
Jul 13, 2017
Sainsbury's introduces ham smart label technology to combat waste

Sainsbury's introduces ham smart label technology to combat waste

Sainsbury's is attempting to tackle food waste with the introduction of a 'smart label' for its own-brand ham.
IDTechEx Research Subscribers
Immersion vs. Fitbit: Everything you need to know in 7 charts

Immersion vs. Fitbit: Everything you need to know in 7 charts

Earlier this week, Immersion Corporation filed a patent infringement lawsuit against Fitbit. This is in addition to an existing lawsuit they have against Apple, also relating to the infringement of their patents in haptics, user interfaces and human-machine interfaces. In this article, James Hayward describes the background to these lawsuits within the broader context of the haptics industry.
External Company Press Release
David Yao joins Nanoco Group plc

David Yao joins Nanoco Group plc

Nanoco Group plc, developer and manufacturer of cadmium-free quantum dots and other nanomaterials, is pleased to confirm the appointment of David Yao as Senior Vice President of Global Sales.
Printed Electronics World
Jul 12, 2017
The road to fully flexible consumer electronics

The road to fully flexible consumer electronics

Flexible consumer electronic devices are now a reality, and as forecasted by IDTechEx in the launch of the first ever market research report on the topic of barrier films for electronics almost ten years ago, innovation in encapsulation was one of the critical requirements that needed to be met in order to realize commercially viable consumer products.
External Company Press Release
Growing demand drives TactoTek expansion

Growing demand drives TactoTek expansion

TactoTek announced the opening of its new manufacturing and corporate headquarters facilities in Oulu, Finland, initiating a new phase of company growth.
Printed Electronics World
Jul 11, 2017
3D printing structural electronics

3D printing structural electronics

TNO discuss their developments on 3D printed structural electronics using selective laser centering from a polymer pattern, and shows examples of their 3D printed products.
Printed Electronics World
Jul 27, 2017
Colour-shifting electronic skin

Colour-shifting electronic skin

Researchers have developed a new type of user-interactive electronic skin, with a colour change perceptible to the human eye, and achieved with a much-reduced level of strain. Their results could have applications in robotics, prosthetics and wearable technology.
Printed Electronics World
Jul 25, 2017
Webinar Tuesday 8 August - New Technologies for Metal 3D Printing

Webinar Tuesday 8 August - New Technologies for Metal 3D Printing

IDTechEx is hosting a free webinar 'New Technologies for Metal 3D Printing' on Tuesday 8 August.
Printed Electronics World
Jul 24, 2017
Simplifying printed electronics

Simplifying printed electronics

A team of researchers has developed a technique for printing flexible electronics that uses laser driven micro-bubbles to write or make patterns on transparent surfaces.
External Company Press Release
Eight19 secures 1.3m Pounds funding

Eight19 secures 1.3m Pounds funding

The new investment follows two years of continued improvement in OPV performance, advances in manufacturing readiness and an increased engagement with customers in the retail, FMCG and IoT sectors.
Printed Electronics World
Jul 18, 2017
Dynamic templates critical to printable electronics technology

Dynamic templates critical to printable electronics technology

When it comes to efficiency, sometimes it helps to look to Mother Nature for advice - even in technology as advanced as printable, flexible electronics.
Printed Electronics World
Jul 17, 2017
Composites, Drones & LPWAN IDTechEx #TechRoundUp

Composites, Drones & LPWAN IDTechEx #TechRoundUp

Dr Richard Collins et al. discuss composites and their uses in drones and enabling internet infrastructure.
Printed Electronics World
Jul 14, 2017
Sprayable sensing network technology

Sprayable sensing network technology

The sprayed sensors can be networked, to render rich real-time information on the health status of the structure under monitoring.
IDTechEx Research Subscribers
Immersion vs. Fitbit: Everything you need to know in 7 charts

Immersion vs. Fitbit: Everything you need to know in 7 charts

Earlier this week, Immersion Corporation filed a patent infringement lawsuit against Fitbit. This is in addition to an existing lawsuit they have against Apple, also relating to the infringement of their patents in haptics, user interfaces and human-machine interfaces. In this article, James Hayward describes the background to these lawsuits within the broader context of the haptics industry.
Printed Electronics World
Jul 12, 2017
The road to fully flexible consumer electronics

The road to fully flexible consumer electronics

Flexible consumer electronic devices are now a reality, and as forecasted by IDTechEx in the launch of the first ever market research report on the topic of barrier films for electronics almost ten years ago, innovation in encapsulation was one of the critical requirements that needed to be met in order to realize commercially viable consumer products.
Printed Electronics World
Jul 11, 2017
3D printing structural electronics

3D printing structural electronics

TNO discuss their developments on 3D printed structural electronics using selective laser centering from a polymer pattern, and shows examples of their 3D printed products.
External Company Press Release
Acquisition of CERADROP hybrid 3D digital deposition platform

Acquisition of CERADROP hybrid 3D digital deposition platform

The University of Texas at San Antonio strengthens multifunctional electronic materials and devices research by acquisition of CERADROP hybrid 3D digital deposition platform.
Printed Electronics World
Jul 25, 2017
Toppan Forms develops ITO replacement using silver salt ink

Toppan Forms develops ITO replacement using silver salt ink

Toppan Forms Co Ltd has developed a technology for forming printed micro wires, which enables a wire width of 4 micrometers that is almost invisible to the naked eye.
Printed Electronics World
Jul 19, 2017
Breathable, wearable electronics on skin

Breathable, wearable electronics on skin

A hypoallergenic electronic sensor can be worn on the skin continuously for a week without discomfort, and is so light and thin that users forget they even have it on, says a Japanese group of scientists.
External Company Press Release
Cratus leverages Thinfilm's NFC technology

Cratus leverages Thinfilm's NFC technology

Through the collaboration, Cratus will integrate Thinfilm's technology into mobile sensor platforms, enabling location sensing and tamper-evidence monitoring of high-value goods through the simple tap of a smartphone or commercial reader.
Printed Electronics World
Jul 17, 2017
Webinar Thursday 3 August - Opportunities for LPWAN Technologies

Webinar Thursday 3 August - Opportunities for LPWAN Technologies

IDTechEx is hosting a free webinar on opportunities for LPWAN technologies on Thursday 3 August.
Printed Electronics World
Jul 17, 2017
Low-cost smart glove translates American Sign Language into text

Low-cost smart glove translates American Sign Language into text

Engineers have developed a smart glove that wirelessly translates the American Sign Language alphabet into text and controls a virtual hand to mimic sign language gestures.
Printed Electronics World
Jul 13, 2017
Sainsbury's introduces ham smart label technology to combat waste

Sainsbury's introduces ham smart label technology to combat waste

Sainsbury's is attempting to tackle food waste with the introduction of a 'smart label' for its own-brand ham.
External Company Press Release
David Yao joins Nanoco Group plc

David Yao joins Nanoco Group plc

Nanoco Group plc, developer and manufacturer of cadmium-free quantum dots and other nanomaterials, is pleased to confirm the appointment of David Yao as Senior Vice President of Global Sales.
External Company Press Release
Growing demand drives TactoTek expansion

Growing demand drives TactoTek expansion

TactoTek announced the opening of its new manufacturing and corporate headquarters facilities in Oulu, Finland, initiating a new phase of company growth.
More IDTechEx Journals