Hosted by IDTechEx
New Metallic Material for Flexible Soft Robots

New Metallic Material for Flexible Soft Robots

Printed Electronics World
Nov 29, 2019
Wood is the Surprising Ingredient in Electrodes for Wearables

Wood is the Surprising Ingredient in Electrodes for Wearables

Wood fibres are being used by researchers to create a new class of stronger and lower-cost electrodes for even lighter and long-lasting flexible electronics and wearables.
Printed Electronics World
Nov 28, 2019
Scratching the Surface of Perovskites

Scratching the Surface of Perovskites

Versatile compounds called perovskites are valued for their application in next generation solar energy technologies. Despite their efficiency and relative cheapness, perovskite devices have yet to be perfected; they often contain atomic-level structural defects.
Printed Electronics World
Nov 27, 2019
IDTechEx Printed Electronics USA 2019 Award Winners

IDTechEx Printed Electronics USA 2019 Award Winners

At the 16th IDTechEx Printed Electronics USA conference and exhibition held in Santa Clara on November 20-21, three organizations were honored for their great achievements in developing and commercializing printed electronics technologies.
IDTechEx Research Subscribers
Formnext 2019

Formnext 2019

A rundown of the most innovative companies at Formnext 2019
Printed Electronics World
Nov 27, 2019
Ripple in Flexible Material Could Improve Electronic Properties

Ripple in Flexible Material Could Improve Electronic Properties

Two-dimensional materials — those either only an atom or layer thick — display a number of interesting properties and could form the foundation for a range of new devices. One of these materials, molybdenum disulfide, has shown an unusual flexibility that could make it attractive as a semiconducting component of bendable electronics.
IDTechEx Research Subscribers
Women in STEM discussion at the IDTechEx Show! USA 2019

Women in STEM discussion at the IDTechEx Show! USA 2019

At the IDTechEx Show! USA 2019, in Santa Clara, there was a panel discussion on "Women in STEM". This article summarizes the key topics and points from the discussion.
Printed Electronics World
Nov 26, 2019
Perovskite Solar Cells Can Capture More Electricity

Perovskite Solar Cells Can Capture More Electricity

Scientists have developed a method to analyse which pairs of materials in next-generation perovskite solar cells will harvest the most energy.
Printed Electronics World
Nov 25, 2019
Clean Carbon Nanotubes with Superb Properties

Clean Carbon Nanotubes with Superb Properties

Scientists at Aalto University, Finland, and Nagoya University, Japan, have found a new way to make ultra-clean carbon nanotube transistors with superior semiconducting properties.
Printed Electronics World
Nov 25, 2019
Soft Skin-Like Robots You Can Put in Your Pocket

Soft Skin-Like Robots You Can Put in Your Pocket

Stretchable skin-like robots that can be rolled up and put in your pocket have been developed using a new way of embedding artificial muscles and electrical adhesion into soft materials.
Printed Electronics World
Nov 25, 2019
Magnetic Skin Ensures the Force is With You

Magnetic Skin Ensures the Force is With You

A magnetic skin that is safe and comfortable to wear could open the door to a wide range of wireless, remotely controlled applications.
Printed Electronics World
Nov 22, 2019
Epidermal VR Gives Technology a Human Touch

Epidermal VR Gives Technology a Human Touch

Imagine holding hands with a loved one on the other side of the world. Or feeling a pat on the back from a teammate in the online game "Fortnite."
External Company Press Release
Ynvisble Strengthens Board of Directors

Ynvisble Strengthens Board of Directors

Ynvisible Interactive Inc is pleased to announce the appointment of Michael Robinson and Leif Ljungqvist as new independent members of its Board of Directors.
Printed Electronics World
Nov 21, 2019
IDTechEx Sensors USA 2019 Award Winner

IDTechEx Sensors USA 2019 Award Winner

Sensors and their enabling technologies are being developed rapidly. From materials, to components, from manufacturing method to integration techniques, from R&D to commercialization, the various disruptive technologies and their applicants indicate the continued improvement in the innovation from different aspects. Each year at IDTechEx Show!, a company is honoured the Best Innovative Sensor Technology award for its development and achievement in the sensor innovation and commercialization area.
Printed Electronics World
Nov 21, 2019
Thermoelectric Harvesting Finding its Place at Last?

Thermoelectric Harvesting Finding its Place at Last?

Will market growth in thermoelectric energy harvesting primarily come from low or high power opportunities? Which researchers and manufacturers have the products with the most potential? Forecasts by industry? Significance of latest advances? Most active countries? It is all here in the new IDTechEx report, "Thermoelectric Energy Harvesting and Sensing 2020-2030"
External Company Press Release
Prelonic Launches PIP: Prelonic-Interactive-Paper

Prelonic Launches PIP: Prelonic-Interactive-Paper

The recently developed mass production process for hybrid electronics allows the launch of products that combine mobile phones and paper.
Printed Electronics World
Nov 20, 2019
20.1 Billion RFID Tags to be Sold in 2019, finds IDTechEx Research

20.1 Billion RFID Tags to be Sold in 2019, finds IDTechEx Research

RFID Forecasts, Players and Opportunities 2019-2029, the global annual survey of the RFID industry by analysts IDTechEx, reveals that in 2019 the number of passive RFID tags sold will increase by 13% over 2018.
Printed Electronics World
Nov 20, 2019
Printed Metal Conductors May be Next Generation Electronic Displays

Printed Metal Conductors May be Next Generation Electronic Displays

Each year, consumers ask more of electronic displays, wanting them bigger, brighter, and even flexible. Displays from smartwatches to 4K TVs currently consist of organic light-emitting diodes which use indium tin oxide as a transparent electrode. However, ITO has its limitations: it is expensive; doesn't perform well enough for larger areas; and can crack with repeated touching or swiping.
Printed Electronics World
Nov 19, 2019
Bionic Hand Made in Ten Hours

Bionic Hand Made in Ten Hours

A bionic hand can be made to measure in 10 hours and can grip using a moveable thumb. Designers and engineers have been able to entirely 3D Print the device with embedded electrical circuitry to seamlessly connect sensors and actuators.
Printed Electronics World
Nov 19, 2019
Wearable Oxygen Sensor for Sick Infants

Wearable Oxygen Sensor for Sick Infants

Researchers are developing a sensor the size of a Band-Aid that will measure a baby's blood oxygen levels, a vital indication of the lungs' effectiveness and whether the baby's tissue is receiving adequate oxygen supply.
Printed Electronics World
Nov 29, 2019
Wood is the Surprising Ingredient in Electrodes for Wearables

Wood is the Surprising Ingredient in Electrodes for Wearables

Wood fibres are being used by researchers to create a new class of stronger and lower-cost electrodes for even lighter and long-lasting flexible electronics and wearables.
Printed Electronics World
Nov 27, 2019
IDTechEx Printed Electronics USA 2019 Award Winners

IDTechEx Printed Electronics USA 2019 Award Winners

At the 16th IDTechEx Printed Electronics USA conference and exhibition held in Santa Clara on November 20-21, three organizations were honored for their great achievements in developing and commercializing printed electronics technologies.
Printed Electronics World
Nov 27, 2019
Ripple in Flexible Material Could Improve Electronic Properties

Ripple in Flexible Material Could Improve Electronic Properties

Two-dimensional materials — those either only an atom or layer thick — display a number of interesting properties and could form the foundation for a range of new devices. One of these materials, molybdenum disulfide, has shown an unusual flexibility that could make it attractive as a semiconducting component of bendable electronics.
Printed Electronics World
Nov 26, 2019
Perovskite Solar Cells Can Capture More Electricity

Perovskite Solar Cells Can Capture More Electricity

Scientists have developed a method to analyse which pairs of materials in next-generation perovskite solar cells will harvest the most energy.
Printed Electronics World
Nov 25, 2019
Soft Skin-Like Robots You Can Put in Your Pocket

Soft Skin-Like Robots You Can Put in Your Pocket

Stretchable skin-like robots that can be rolled up and put in your pocket have been developed using a new way of embedding artificial muscles and electrical adhesion into soft materials.
Printed Electronics World
Nov 22, 2019
Epidermal VR Gives Technology a Human Touch

Epidermal VR Gives Technology a Human Touch

Imagine holding hands with a loved one on the other side of the world. Or feeling a pat on the back from a teammate in the online game "Fortnite."
Printed Electronics World
Nov 21, 2019
IDTechEx Sensors USA 2019 Award Winner

IDTechEx Sensors USA 2019 Award Winner

Sensors and their enabling technologies are being developed rapidly. From materials, to components, from manufacturing method to integration techniques, from R&D to commercialization, the various disruptive technologies and their applicants indicate the continued improvement in the innovation from different aspects. Each year at IDTechEx Show!, a company is honoured the Best Innovative Sensor Technology award for its development and achievement in the sensor innovation and commercialization area.
External Company Press Release
Prelonic Launches PIP: Prelonic-Interactive-Paper

Prelonic Launches PIP: Prelonic-Interactive-Paper

The recently developed mass production process for hybrid electronics allows the launch of products that combine mobile phones and paper.
Printed Electronics World
Nov 20, 2019
Printed Metal Conductors May be Next Generation Electronic Displays

Printed Metal Conductors May be Next Generation Electronic Displays

Each year, consumers ask more of electronic displays, wanting them bigger, brighter, and even flexible. Displays from smartwatches to 4K TVs currently consist of organic light-emitting diodes which use indium tin oxide as a transparent electrode. However, ITO has its limitations: it is expensive; doesn't perform well enough for larger areas; and can crack with repeated touching or swiping.
Printed Electronics World
Nov 19, 2019
Wearable Oxygen Sensor for Sick Infants

Wearable Oxygen Sensor for Sick Infants

Researchers are developing a sensor the size of a Band-Aid that will measure a baby's blood oxygen levels, a vital indication of the lungs' effectiveness and whether the baby's tissue is receiving adequate oxygen supply.
Printed Electronics World
Nov 28, 2019
Scratching the Surface of Perovskites

Scratching the Surface of Perovskites

Versatile compounds called perovskites are valued for their application in next generation solar energy technologies. Despite their efficiency and relative cheapness, perovskite devices have yet to be perfected; they often contain atomic-level structural defects.
IDTechEx Research Subscribers
Formnext 2019

Formnext 2019

A rundown of the most innovative companies at Formnext 2019
IDTechEx Research Subscribers
Women in STEM discussion at the IDTechEx Show! USA 2019

Women in STEM discussion at the IDTechEx Show! USA 2019

At the IDTechEx Show! USA 2019, in Santa Clara, there was a panel discussion on "Women in STEM". This article summarizes the key topics and points from the discussion.
Printed Electronics World
Nov 25, 2019
Clean Carbon Nanotubes with Superb Properties

Clean Carbon Nanotubes with Superb Properties

Scientists at Aalto University, Finland, and Nagoya University, Japan, have found a new way to make ultra-clean carbon nanotube transistors with superior semiconducting properties.
Printed Electronics World
Nov 25, 2019
Magnetic Skin Ensures the Force is With You

Magnetic Skin Ensures the Force is With You

A magnetic skin that is safe and comfortable to wear could open the door to a wide range of wireless, remotely controlled applications.
External Company Press Release
Ynvisble Strengthens Board of Directors

Ynvisble Strengthens Board of Directors

Ynvisible Interactive Inc is pleased to announce the appointment of Michael Robinson and Leif Ljungqvist as new independent members of its Board of Directors.
Printed Electronics World
Nov 21, 2019
Thermoelectric Harvesting Finding its Place at Last?

Thermoelectric Harvesting Finding its Place at Last?

Will market growth in thermoelectric energy harvesting primarily come from low or high power opportunities? Which researchers and manufacturers have the products with the most potential? Forecasts by industry? Significance of latest advances? Most active countries? It is all here in the new IDTechEx report, "Thermoelectric Energy Harvesting and Sensing 2020-2030"
Printed Electronics World
Nov 20, 2019
20.1 Billion RFID Tags to be Sold in 2019, finds IDTechEx Research

20.1 Billion RFID Tags to be Sold in 2019, finds IDTechEx Research

RFID Forecasts, Players and Opportunities 2019-2029, the global annual survey of the RFID industry by analysts IDTechEx, reveals that in 2019 the number of passive RFID tags sold will increase by 13% over 2018.
Printed Electronics World
Nov 19, 2019
Bionic Hand Made in Ten Hours

Bionic Hand Made in Ten Hours

A bionic hand can be made to measure in 10 hours and can grip using a moveable thumb. Designers and engineers have been able to entirely 3D Print the device with embedded electrical circuitry to seamlessly connect sensors and actuators.
More IDTechEx Journals