Hosted by IDTechEx
Conductive Inks: Finding the Right Segment in a Diverse $2.3B Market

Conductive Inks: Finding the Right Segment in a Diverse $2.3B Market

Printed Electronics World
Jun 24, 2020
Sub-6GHz and mmWave 5G: Opportunities for Thermal Management Materials

Sub-6GHz and mmWave 5G: Opportunities for Thermal Management Materials

The 5G market is expanding rapidly, with the first installations already being demonstrated. The increasing deployment of 5G will generate innovation and growth opportunities in thermal management.
Printed Electronics World
Jun 23, 2020
Is Cell Design Limiting Electric Vehicle Thermal Management?

Is Cell Design Limiting Electric Vehicle Thermal Management?

Thermal management of batteries for electric vehicles is a crucial issue. It is important not only for safety and thermal runaway prevention, but also for the performance and longevity of the battery.
Printed Electronics World
Jun 22, 2020
Biodegradable vs. Recyclable Plastics

Biodegradable vs. Recyclable Plastics

Which Is Better for the Environment? In recent years, plastic production has accelerated, with global plastic set production to reach 600 million tonnes by 2030 if production continues at its current rate of growth. Most of this plastic is not biodegradable, with 30-50% of it being produced for single-use applications.
Printed Electronics World
Jun 17, 2020
Flexible Hybrid Electronics: Strategies to Enable Cheaper Substrates

Flexible Hybrid Electronics: Strategies to Enable Cheaper Substrates

Picture a flexible circuit board (FPCB) and you will almost inevitably visualise a sheet of orange/brown plastic, probably with a few copper traces and maybe some soldered components on it. This plastic is PI (polyimide/Kapton), and its ubiquity is primarily due to its temperature resistance and general durability.
Printed Electronics World
Jun 17, 2020
Webinar - Energy Harvesting Microwatt-Gigawatt: New Directions

Webinar - Energy Harvesting Microwatt-Gigawatt: New Directions

Materials suppliers need to appraise opportunities at all power levels of energy harvesting. Those developing, making and using harvesters providing microwatts to GW need to see the big picture and how they can expand into it.
Printed Electronics World
Jun 16, 2020
Updating the e-Textiles Mantra: An Analyst's Commentary

Updating the e-Textiles Mantra: An Analyst's Commentary

A recent article by IDTechEx Principal Analyst, James Hayward, written on the need to update e-textiles' traditional mantra which implies that "technology + comfort = success".
Printed Electronics World
Jun 12, 2020
Upcoming Webinar on Electronics as Smart Materials

Upcoming Webinar on Electronics as Smart Materials

In this webinar IDTechEx Chairman, Dr Peter Harrop, describes a large new opportunity for added value materials suppliers. Electronics and electrics are moving from components-in-a-box to user "edit-able" composites, stretchable film and even paint.
Printed Electronics World
Jun 11, 2020
5G Market is at the Tipping Point

5G Market is at the Tipping Point

5G is considered as one of the largest market opportunities in the coming years, with large scale roll-out of infrastructures and rapid adoption of 5G devices and services. 5G will not only accelerate the growth and expansion of telecom; it will also redefine and accelerate industries such as automotive, entertainment, computing, and manufacturing.
Printed Electronics World
Jun 10, 2020
Printed Sensors: Emerging Applications Outweigh Test Strip Decline

Printed Sensors: Emerging Applications Outweigh Test Strip Decline

Asked to picture a printed sensor, you might well imagine a paper test strip for measuring blood glucose concentration. After all, such test strips comprise the majority of the printed sensor market, with billions used each year by diabetics around the world. However, this ubiquitous application masks a highly complex, fragmented and in some cases rapidly growing market that spans applications ranging from image sensing to wearable electrodes.
Printed Electronics World
Jun 5, 2020
Why Are We Still Talking About Hydrogen Economy and Fuel Cells?

Why Are We Still Talking About Hydrogen Economy and Fuel Cells?

Once every ten years the promising future of a hydrogen economy and fuel cells is announced. Hydrogen over the years has had several periods of hypes, which always blow off as nothing concrete, but why are we still talking about it? And why is there still the belief of a hydrogen economy, when Li-ion batteries are dominating the market?
Printed Electronics World
Jun 4, 2020
Materials Informatics: The Time For Adoption is Now

Materials Informatics: The Time For Adoption is Now

Materials Informatics is the key to enabling a paradigm shift in our approach to materials science R&D. Significant investment, notable adoption from key end-users, and technology leaps make it evident that it's time has come. Through primary-interview based analysis, IDTechEx has introduced the most comprehensive market report on the topic: "Materials Informatics 2020-2030".
Printed Electronics World
Jun 2, 2020
Upcoming Webinar on the Topic of Hydrogen Economy

Upcoming Webinar on the Topic of Hydrogen Economy

In this webinar, IDTechEx Technology Analyst Daniele Gatti, will provide a complete overview of the hydrogen economy, and technical specifics of fuel cells and electrolysers.
Printed Electronics World
Jun 1, 2020
Watch: Virtual Event, Opportunities for Printed & Flexible Electronics

Watch: Virtual Event, Opportunities for Printed & Flexible Electronics

IDTechEx, host of the world's largest event series on Printed & Flexible Electronics, broadcast this virtual event last week featuring Coca-Cola, Swarovski, Electrolux, Neotech AMT, Ynvisible, Roartis and IDTechEx. Watch on-demand.
Printed Electronics World
Jun 1, 2020
Upcoming Webinar - What to Know about Micro-LED Displays

Upcoming Webinar - What to Know about Micro-LED Displays

In this webinar, presented by IDTechEx Principal Analyst Dr Xiaoxi He, will give an introduction of micro-LED displays and things you should know about them. We will talk about 2-3 technologies involved in micro-LED fabrication with more details.
Printed Electronics World
Jun 24, 2020
Sub-6GHz and mmWave 5G: Opportunities for Thermal Management Materials

Sub-6GHz and mmWave 5G: Opportunities for Thermal Management Materials

The 5G market is expanding rapidly, with the first installations already being demonstrated. The increasing deployment of 5G will generate innovation and growth opportunities in thermal management.
Printed Electronics World
Jun 22, 2020
Biodegradable vs. Recyclable Plastics

Biodegradable vs. Recyclable Plastics

Which Is Better for the Environment? In recent years, plastic production has accelerated, with global plastic set production to reach 600 million tonnes by 2030 if production continues at its current rate of growth. Most of this plastic is not biodegradable, with 30-50% of it being produced for single-use applications.
Printed Electronics World
Jun 17, 2020
Webinar - Energy Harvesting Microwatt-Gigawatt: New Directions

Webinar - Energy Harvesting Microwatt-Gigawatt: New Directions

Materials suppliers need to appraise opportunities at all power levels of energy harvesting. Those developing, making and using harvesters providing microwatts to GW need to see the big picture and how they can expand into it.
Printed Electronics World
Jun 12, 2020
Upcoming Webinar on Electronics as Smart Materials

Upcoming Webinar on Electronics as Smart Materials

In this webinar IDTechEx Chairman, Dr Peter Harrop, describes a large new opportunity for added value materials suppliers. Electronics and electrics are moving from components-in-a-box to user "edit-able" composites, stretchable film and even paint.
Printed Electronics World
Jun 10, 2020
Printed Sensors: Emerging Applications Outweigh Test Strip Decline

Printed Sensors: Emerging Applications Outweigh Test Strip Decline

Asked to picture a printed sensor, you might well imagine a paper test strip for measuring blood glucose concentration. After all, such test strips comprise the majority of the printed sensor market, with billions used each year by diabetics around the world. However, this ubiquitous application masks a highly complex, fragmented and in some cases rapidly growing market that spans applications ranging from image sensing to wearable electrodes.
Printed Electronics World
Jun 4, 2020
Materials Informatics: The Time For Adoption is Now

Materials Informatics: The Time For Adoption is Now

Materials Informatics is the key to enabling a paradigm shift in our approach to materials science R&D. Significant investment, notable adoption from key end-users, and technology leaps make it evident that it's time has come. Through primary-interview based analysis, IDTechEx has introduced the most comprehensive market report on the topic: "Materials Informatics 2020-2030".
Printed Electronics World
Jun 1, 2020
Watch: Virtual Event, Opportunities for Printed & Flexible Electronics

Watch: Virtual Event, Opportunities for Printed & Flexible Electronics

IDTechEx, host of the world's largest event series on Printed & Flexible Electronics, broadcast this virtual event last week featuring Coca-Cola, Swarovski, Electrolux, Neotech AMT, Ynvisible, Roartis and IDTechEx. Watch on-demand.
Printed Electronics World
Jun 23, 2020
Is Cell Design Limiting Electric Vehicle Thermal Management?

Is Cell Design Limiting Electric Vehicle Thermal Management?

Thermal management of batteries for electric vehicles is a crucial issue. It is important not only for safety and thermal runaway prevention, but also for the performance and longevity of the battery.
Printed Electronics World
Jun 17, 2020
Flexible Hybrid Electronics: Strategies to Enable Cheaper Substrates

Flexible Hybrid Electronics: Strategies to Enable Cheaper Substrates

Picture a flexible circuit board (FPCB) and you will almost inevitably visualise a sheet of orange/brown plastic, probably with a few copper traces and maybe some soldered components on it. This plastic is PI (polyimide/Kapton), and its ubiquity is primarily due to its temperature resistance and general durability.
Printed Electronics World
Jun 16, 2020
Updating the e-Textiles Mantra: An Analyst's Commentary

Updating the e-Textiles Mantra: An Analyst's Commentary

A recent article by IDTechEx Principal Analyst, James Hayward, written on the need to update e-textiles' traditional mantra which implies that "technology + comfort = success".
Printed Electronics World
Jun 11, 2020
5G Market is at the Tipping Point

5G Market is at the Tipping Point

5G is considered as one of the largest market opportunities in the coming years, with large scale roll-out of infrastructures and rapid adoption of 5G devices and services. 5G will not only accelerate the growth and expansion of telecom; it will also redefine and accelerate industries such as automotive, entertainment, computing, and manufacturing.
Printed Electronics World
Jun 5, 2020
Why Are We Still Talking About Hydrogen Economy and Fuel Cells?

Why Are We Still Talking About Hydrogen Economy and Fuel Cells?

Once every ten years the promising future of a hydrogen economy and fuel cells is announced. Hydrogen over the years has had several periods of hypes, which always blow off as nothing concrete, but why are we still talking about it? And why is there still the belief of a hydrogen economy, when Li-ion batteries are dominating the market?
Printed Electronics World
Jun 2, 2020
Upcoming Webinar on the Topic of Hydrogen Economy

Upcoming Webinar on the Topic of Hydrogen Economy

In this webinar, IDTechEx Technology Analyst Daniele Gatti, will provide a complete overview of the hydrogen economy, and technical specifics of fuel cells and electrolysers.
Printed Electronics World
Jun 1, 2020
Upcoming Webinar - What to Know about Micro-LED Displays

Upcoming Webinar - What to Know about Micro-LED Displays

In this webinar, presented by IDTechEx Principal Analyst Dr Xiaoxi He, will give an introduction of micro-LED displays and things you should know about them. We will talk about 2-3 technologies involved in micro-LED fabrication with more details.
More IDTechEx Journals