Hosted by IDTechEx
Printed Electronics World
Posted on February 25, 2009 by  & 
External Company Press Release

Phoseon Technology releases their FireFlex and FireEdge solutions

As the world leader in delivering high power, UV-LED systems, Phoseon Technology pioneered the Semiconductor Light Matrix (SLM™). With SLM™ technology, OEMs can manufacture the environmentally cleanest, coolest operating, and most efficient UV-based UV curing solutions commercially available.
The latest additions to our product family are the FireFlex and FireEdge solutions.
The RX FireFlex is designed as a scalable "high power" UV LED curing solution aimed primarily at high performance/high speed single pass UV inkjet applications but with utility in a wide variety of web/conveyor based UV curing applications. The initial product from the RX FireFlex family has an emitting area of 75mm x 50mm and is available in peak irradiances of 4W/cm2 or 8W/cm2 as measured at system output glass - which correlates to up to 72W/cm2 at the LED level. The RX FireFlex architecture is designed to allow the systems to be scalable in 75mm increments to as much as 2m in length with a variety of peak irradiance and total UV power specifications based on customer and application needs.
The RX FireEdge is designed as a simple, low cost, small form factor UV LED system for "pinning" applications where the requirement is to "freeze" the ink jet drop without fully curing. The first product of this family has a native emitting area of 75mm x 5mm but systems can be scaled linearly (end-2-end) in 75mm increments without affecting pinning uniformity.
You can download information about both products from the Phoseon website under the resources section
Top image: The RX FireFlex is a water cooled high intensity UV light "bar" with a configurable emitting lengths up to 2m and emitting width of 50mm.
More IDTechEx Journals