Webinar Title: Additive Electronics Manufacturing: Innovations & Prospects
Date: Friday 10 February 2023
Presenter: Dr Matthew Dyson - Principal Technology Analyst, IDTechEx
Space is limited - reserve your seat today!
Printed electronics enables a transition from conventional sheet based subtractive manufacturing to more efficient and responsive production methods that can be additive, digital, and higher throughput. As electronics become increasingly ubiquitous, and pressures on cost and sustainability increase, taking advantage of the latest manufacturing methods will become ever-more important.
An especially notable transition is from sheet-to-sheet (S2S) to higher throughput roll-to-roll (R2R) manufacturing. Since conductive ink can be directly printed onto low-cost flexible substrates such as PET or paper via established methods such as flexographic or gravure printing, there is scope to dramatically lower the unit cost of simple electronics. This dramatic cost reduction is a pre-requisite for high volume applications such as smart packaging for consumer goods.
Furthermore, there is increasing interest in digital manufacturing methods that facilitate rapid prototyping and efficient high-mix low-volume (HMLV) production. Especially notable is laser induced forward transfer (LIFT), an emerging approach that brings the benefits of inkjet printing to a much wider range of printable materials while increasing throughput.
In this webinar Dr Matthew Dyson, a Principal Technology Analyst at IDTechEx, will discuss the following topics:
- The status and prospects of competing analogue and digital manufacturing methods for printed electronics, including a comparison of length scale and throughput.
- Technical discussion of emerging digital manufacturing methodologies, such as laser induced forward transfer and electrodynamic printing.
- Evaluation of the benefits and challenges of adopting high throughput roll-to-roll manufacturing.
- Innovations in component placement and attachment that will facilitate manufacturing of flexible hybrid electronics (FHE).
The brand new IDTechEx report, "Manufacturing Printed Electronics 2023-2033", explores the developments, transitions, and technological innovations within printed electronics manufacturing. Drawing on IDTechEx's many years of experience analyzing the printed electronics space, and on interviews and interactions with over 30 companies, we assess the attributes, readiness level, use cases and market demand for 20 analogue/digital printing and component attachment technologies.
Register Your Free Place
We will be holding exactly the same webinar three times in one day. Please register for the session most convenient for you.
Date: Friday 10 February 2023
Duration: Approx. 30 Minutes
Webinar #1: Asia-Pacific
10:00am (UTC+8) Singapore, Taipei, Beijing
10:00am (UTC+8) Australian Western Standard Time
11:00am (UTC+9) Tokyo, Seoul
12:30pm (UTC+10.30) Australian Central Time
1:00pm (UTC+11) Australian Eastern Time
3:00pm (UTC+13) Auckland, New Zealand
Webinar #2: Europe
10:00am (UTC) London
11:00am (UTC+1) Amsterdam, Berlin, Rome
12:00noon (UTC+2) Athens, Jerusalem
Webinar #3: Americas
9:00am (Pacific Time PT) USA & Canada
10:00am (Mountain MST) USA & Canada
11:00am (Central CST) USA & Canada
12:00noon (Eastern EST) USA & Canada
5:00pm (UTC) London