Hosted by IDTechEx
Printed Electronics World
Posted on May 15, 2012 by  & 

The Clean4Yield project

Clean4Yield project targets contamination and defect control in roll-to-roll organic electronics production

The EU-funded Clean4Yield project coordinated by Holst Centre/TNO, is a three-year project bringing together commercial and research partners from Europe and Israel to tackle one of the most pressing issues in organic electronics - ensuring high enough yields for cost-effective manufacturing. To this end, the partners will develop new technologies for inspecting, cleaning and repairing moving foils, and detecting and preventing defects in large-scale roll-to-roll production of OLEDs and OPVs.
Large Organic light emitting diode (OLED) on foil (© Holst Centre)
High-volume roll-to-roll processes are key to making organic electronics such as OLEDs (organic light-emitting diodes) and OPVs (organic photovoltaics) available at mass-market prices.
Manufacturers will be looking for production yields above 95% to minimize the wastage of expensive production materials. However, organic electronic devices are made of layers of chemicals, each around 100-300 nanometers thick. At this scale, a single dust particle can make a connection between layers, causing the final device to malfunction.
Inspection, defect detection, cleaning and repair of moving foils
Meeting these yield requirements will require advanced contamination and defect control. Such issues are well-known in traditional silicon-based electronics. However the larger areas, and moving, flexible substrates of roll-to-roll processes mean existing techniques cannot be easily transferred. Hence the Clean4Yield project will work to develop new technologies capable of inspecting moving foils for micro- and nanoscale dust particles and defects, and for cleaning / repairing layers as necessary. It will also explore techniques for preventing dust particles reaching the foil in roll-to-roll environments.
"The EU recognized an urgent need for these technologies, and that developing them here will provide long-term opportunities for Europe's instrumentation and equipment industries. Clean4Yield will deploy a holistic approach to address problems that are common to both OLEDs and OPVs, and which have relevance to other areas of flexible electronics," said project coordinator Juliane Gabel of Holst Centre.
Consortium members
The Clean4Yield consortium covers the entire value chain including materials and equipment suppliers, device producers and end users. It brings together multi-national companies, small-to-medium enterprises (SMEs), universities and research organizations. The sixteen consortium members are:
Funded through the European Union's Seventh Framework Programme (FP7), the Clean4Yield project will run for 36 months.
More information and latest developments is available at External Link.
Main Image The partners at the KickOff Meeting at Holst Centre, Eindhoven (© Holst Centre)
For more information attend Printed Electronics Asia in Tokyo, Japan on October 2-3 - the key event to learn and network with the leaders in printed electronics in Asia. See Printed Electronics Asia, October 2-3, 2012 to register early for the best savings.
More IDTechEx Journals