JournalArticle SearchList By TopicSubmit ArticleRegister
ResourcesWhite PapersGlossaryStock TrackerPresentations
15 Apr 2009 | Worldwide
Winners of the IDTechEx Printed Electronics Europe Awards
760 people from 31 countries attended the annual IDTechEx Printed Electronics Europe conference and exhibition in Dresden, Germany last week. The event, which is the largest on the topic, hosted the annual awards to recognise outstanding achievement in the industry. The Deputy Mayor of Dresden, Dirk Hilbert, opened the Awards.
The award categories and winners are:
1. Printed Electronics Europe Champion: Germany Trade & Invest
2. Technical Development Manufacturing Award:
3. Technical Development Materials Award: Applied Nanotech
4. New Product Development Award: Kovio
5. Commercialization Award: Power Paper
6. Academic R&D Award: University of Massachusetts working with Brewer Science and Optomec
Printed Electronics Europe Champion: Germany Trade & Invest
The Printed Electronics Champion Award is given to an individual or organization that has done an extraordinary amount of work to promote and develop the industry. IDTechEx CEO Raghu Das said of the winner, "This award is to recognize the enormous work Germany Trade & Invest has done to advance this industry. Their contribution has had a profound effect on the commercialization of the technology and has resulted in Germany becoming the global leader in this field."
Oliver Seiler, Director of Mechanical & Electronic Technologies for Germany Trade & Invest was in attendance to accept the award: "It is such an honor for us to receive this award. We are proud to have been recognized for our contribution in this growing field and hope that companies will continue to benefit from the services we offer."
Oliver Seiler, center, from Germany Trade and Invest collected the award. Deputy Mayor Dirk Hilbert, left and IDTechEx Chairman Dr Peter Harrop, right.
Technical Development Manufacturing Award: Thin Film Electronics and InkTec
InkTec Co.,Ltd., Korea, and Thin Film Electronics ASA, Norway, were awarded with IDTechEx Technical Development Manufacturing Award. The awarded results comes out of a joint Thin Film Electronics and InkTec project, that has demonstrated fully R2R printed memories with a layout and device structure developed by Thin Film Electronics, suitable for applications such as game cards and toys. Up to now rolls with more than 100 m of printed memories has been produced with a total of 5 printing steps.
Raghu Das, CEO of IDTechEx said that "The joint Thin Film Electronics and InkTec achievement is a huge success with the realization of a R2R production worthy printing process capable of realizing printed memory cells with a yield in the 96-97 % range."
Image: Roll to Roll printed memories
Johann Carlsson, CEO, Thin Film Electronics (left) and Kwang-Choon Chung, CEO, InkTec (right)
New Product Development Award: Kovio
This award was sponsored by Smart Systems Campus, Germany
Kovio wins the IDTechEx New Product Development Award for its printed silicon RFID platform. The company demonstrated the world's first silicon-ink based 128-bit HF (13.56MHz) RFID tag. Based on ISO 14443 standards, this product features integrated synchronous analog, logic, anti-collision, and read-only memory blocks. With data rates of 106kbps, this product is 100-1000X higher than previously reported printed organic tags. The breakthrough performance is enabled by Kovio's proprietary IC design and high performance silicon transistors - high mobility (~100cm2/v.s) and low power (CMOS). Volume production is due to start later this year.
Amir Mashkoori, CEO of Kovio (left), accepted the Award
Technical Development Materials Award: Applied Nanotech
Applied Nanotech, a NASDAQ listed company, won the Materials development award for the creation of an inkjettable conductive copper ink. The ink can be processed in air with a drying temperature at under 100C. Silver is widely used but is expensive and alternatives are needed for many applications. The launch of this ink offers a lower cost alternative to silver based inks.
Dr. Zvi Yaniv, the CEO of Applied Nanotech, accepting the award
Commercialization Award: Power Paper
Power Paper won the commercialization award for ingenious use of its printed thin film batteries. Over one million batteries are made each month, which are used for a diverse range of applications. Big successes include the use of batteries integrated into skin patches to significantly speed up the delivery of the cosmetic or drug. Customers include Estee Lauder.
Academic R&D Award: University of Massachusetts working with Brewer Science and Optomec
The University of Massachusetts, Brewer Science and Optomec won the academic award for printing carbon nanotubes to create 5 GHz transistors. The aerosol jet deposition process from Optomec was used to completely print all four layers of the Thin Film Transistor including materials with a wide spectrum of viscosities.
From left to right: Prof Craig Armiento, University of Massachusetts (left), Ulrich Herleb, Brewer Science, Dr Peter Harrop and Dave Ramahi, Optomec
Submissions were judged by a panel made up of four independent experts. For more details please see www.IDTechEx.com/awards .
To learn more read Inorganic and Composite Printed Electronics 2009-2019 .
Inmold, foldable, stretchable and skin-like electronics
- Stretchable Electronics Comes to Market
- RFID Forecasts, Players and Opportunities 2014-2024
- Printed Electronics for Healthcare, Cosmetics and Pharmaceuticals 2014-2024
- Printed, Organic & Flexible Electronics: Forecasts, Players & Opportunities 2013-2023
- Wireless Power Transmission for Consumer Electronics and Electric Vehicles 2014-2024
- Smart Packaging Comes To Market: Brand Enhancement with Electronics 2014-2024
- Touch Screen Modules: Technologies, Markets, Forecasts 2012-2022
- Printed and Chipless RFID Forecasts, Technologies & Players 2011-2021
- Introduction to Printed, Organic and Flexible Electronics
Stretchable Electronics Comes to Market
RFID Forecasts, Players and Opportunities 2014-2024
Printed Electronics for Healthcare, Cosmetics and Pharmaceuticals 2014-2024
Printed, Organic & Flexible Electronics: Forecasts, Players & Opportunities 2013-2023
Wireless Power Transmission for Consumer Electronics and Electric Vehicles 2014-2024
Smart Packaging Comes To Market: Brand Enhancement with Electronics 2014-2024
Touch Screen Modules: Technologies, Markets, Forecasts 2012-2022
Printed and Chipless RFID Forecasts, Technologies & Players 2011-2021
Introduction to Printed, Organic and Flexible Electronics
Surprising material could play role in saving energy
Unlocking secrets of new solar material
Environmentally compatible organic solar cells
$3 Million to advance U.S. competitiveness in the fuel cell market
BMW will use OLEDs in future vehicles
Relieving electric vehicle range anxiety with improved batteries