Shipment of tablets with touch screen technology is expected to reach 100 million units in 2012.

Printed electronics manufacturing is becoming increasingly integrated as companies work on putting together different printing, lamination, substrate handling, curing and finishing processes.

At the forthcoming event, Printed Electronics and Photovoltaics Europe 3-4 April in Berlin, one third of the 94 presentations and masterclasses primarily concern organic compounds but two thirds primarily concern inorganic and composite devices. The organisers did not steer it that way: the customers did.

This includes devices not yet printed today but which are moving towards being printed. Of this market, 30% of the devices studied are made predominately by printing, and 6% are on a non-rigid substrate.

Electronics and electrics on or in paper is being used for security, safety, crime prevention, brand enhancement and merchandising.

OLED versus LED lighting, the energy storage gold rush, replacing ITO and more.

IDTechEx's Printed Electronics Europe 2012 event in Berlin, Germany on April 3-4, will be the largest gathering of end users discussing their needs and experiences with the technology. The event matches technology providers with adopters.

Last week IDTechEx held the largest (worldwide) printed electronics and photovoltaics conference and tradeshow in Silicon Valley (Santa Clara Convention Center, California). This show brought together more than 1300 attendees from 28 countries. Players active across the entire value chain were present; covering the full range from research organisations to end-users, and from small start-ups to multi-billion internationals.

Next week the 8th annual IDTechEx Printed Electronics USA event opens at the Santa Clara Convention Center in CA, USA, on Nov 30 - Dec 1. Pre-registrations are 22% higher compared to this point last year and the number of exhibitors has grown by 19%. Pre-registered attendees are coming from 29 countries, with a particularly large contingent from Korea, Japan and Taiwan. Attendees are also coming from afar as China, Australia, India, South Africa and all over Europe.

This article shares some of the research carried out for the new IDTechEx report, {{RFID in Russia, CIS, Baltic States 2012-2022| http://www.idtechex.com/research/reports/rfid-in-russia-cis-baltic-states-2012-2022-000285.asp}}.

Three weeks remain until the IDTechEx Printed Electronics USA 2011 conference and tradeshow, the biggest event in the world on the topic. This year's tradeshow will be the largest Printed Electronics exhibition to date, with 105 exhibiting companies already confirmed to exhibit on the 46,000 sq.ft. tradeshow floor of the Santa Clara Convention Centre.

Screen Printing is one of the more established technologies utilised in the manufacture of what a lot would consider "conventional" electronics. And although they represent a hybrid state between fully printable electronics and electronics processed in silicon fabs, they also represent the intermediate step that leads to more accurate, fully automated atmospheric processing at very high volumes, with equally high yields.

Most of the well-known objectives of printed electronics remain elusive because they are glamorous, Olympian dreams based on some very exciting demonstrations in laboratories.

Graphene is considered a hot candidate for applications such as computers, displays, photovoltaics, and flexible electronics.

IDTechEx, the organiser of the World's largest global series of Printed Electronics events will hold its European show in Berlin, Germany on 3-4 April. The focus, as at all IDTechEx events, is to address the needs and experiences of adopters of the technology.

Over the next decade, the most vibrant Wireless Power Transmission (WPT) markets will be the contactless charging of portable and mobile equipment, in particular consumer electronics and electric vehicles.

This year, the world's largest event on printed electronics, "printed Electronics USA" will reflect the widening government support for printed electronics. Beyond the burgeoning programs at universities and government research centers, this is particularly evident in military and electric vehicle work. The US Army reflects this in two presentations. One is an overview of materials printing capabilities and prototype development for US Army applications and the other concerns direct write approaches to nanoscale electronics.

IDTechEx has tracked the printed electronics market since 2002. We have conducted extensive research programs, run our own events internationally and attended most other relevant events. Being impartial, we state the good and the bad. So what have we learnt?

According to IDTechEx research in the new report "Brand Enhancement by Electronics in Packaging 2012-2022" the global demand for electronic smart packaging devices is currently at a tipping point and will grow rapidly from $0.03 billion in 2012 to $1.7 billion in 2022. The electronic packaging (e-packaging) market will remain primarily in consumer packaged goods CPG reaching 35 billion units that have electronic functionality in 2022.

This year's Printed Electronics USA will take place in Santa Clara on November 30 and December 1. Analysts IDTechEx who organise the largest event on the subject, have paid a lot of attention once more to the end user streams. Their presence and contributions to the latest instalment of the successful series of events will be appropriate to the new direction of this burgeoning industry.