Hosted by IDTechEx

Printed, Flexible and Organic Electronics

Printed Electronics World
Jun 24, 2020
Printed Perovskite LEDs

Printed Perovskite LEDs

Hybrid perovskite materials promise simplification - by arranging the organic and inorganic components of semiconducting crystal in a specific structure.
Printed Electronics World
Jun 23, 2020
ROARTIS Introduces Fast Cure Materials for PE Applications

ROARTIS Introduces Fast Cure Materials for PE Applications

Belgium based ROARTIS BV, also known under their brandnames IQ- BOND® and IQ-CAST®, develops and manufactures adhesives, coatings and resins for high reliability electronic applications. In the past few years, special attention has been given to printed electronic applications, where high throughput processes required the development of faster assembly materials.
Printed Electronics World
Jun 23, 2020
Flexible and Recyclable Optoelectronics Move a Step Closer

Flexible and Recyclable Optoelectronics Move a Step Closer

Australian researchers have demonstrated the strong potential for a new type of flexible, recyclable electrodes to be used in creating cheaper solar cells, touchscreens, wearable 'e-skins' and next-generation responsive windows.
Printed Electronics World
Jun 22, 2020
New Supercapacitor Opens Door to Better Wearable Electronics

New Supercapacitor Opens Door to Better Wearable Electronics

Researchers have designed a high-performance, low-cost, environmentally friendly, and stretchable supercapacitor that can potentially be used in wearable electronics.
IDTechEx Research Subscribers
What Happened to Magic Leap?

What Happened to Magic Leap?

Magic Leap laid off 1000 employees in April 2020, and has switched to a enterprise market rather than a consumer market. Why?
Printed Electronics World
Jun 17, 2020
Biogel for Soft Electronics Developed

Biogel for Soft Electronics Developed

Researchers introduce an elastic material made out of a non-polluting mix of gelatin and other edible ingredients. What is so special about the new bio-gel? It is elastic, flexible and easy to bend as well as sufficiently stable, allowing it to be combined with electronic components. This discovery forges new paths in the development of soft robotics.
Printed Electronics World
Jun 17, 2020
Flexible Hybrid Electronics: Strategies to Enable Cheaper Substrates

Flexible Hybrid Electronics: Strategies to Enable Cheaper Substrates

Picture a flexible circuit board (FPCB) and you will almost inevitably visualise a sheet of orange/brown plastic, probably with a few copper traces and maybe some soldered components on it. This plastic is PI (polyimide/Kapton), and its ubiquity is primarily due to its temperature resistance and general durability.
Printed Electronics World
Jun 16, 2020
Updating the e-Textiles Mantra: An Analyst's Commentary

Updating the e-Textiles Mantra: An Analyst's Commentary

A recent article by IDTechEx Principal Analyst, James Hayward, written on the need to update e-textiles' traditional mantra which implies that "technology + comfort = success".
External Company Press Release
Flexible Hybrid Electronics Focused Solicitation Request for Proposals

Flexible Hybrid Electronics Focused Solicitation Request for Proposals

Since 1993, SEMI-FlexTech has funded over 200 projects in R&D, with a total public/private investment in excess of U.S. $220 million. SEMI-FlexTech solicits proposals from the flexible electronics industry for candidate projects which will receive funding.
Printed Electronics World
Jun 16, 2020
Transparent Graphene Electrodes for New Generation of Solar Cells

Transparent Graphene Electrodes for New Generation of Solar Cells

A new way of making large sheets of high-quality, atomically thin graphene could lead to ultra-lightweight, flexible solar cells, and to new classes of light-emitting devices and other thin-film electronics.
Printed Electronics World
Jun 24, 2020
Printed Perovskite LEDs

Printed Perovskite LEDs

Hybrid perovskite materials promise simplification - by arranging the organic and inorganic components of semiconducting crystal in a specific structure.
Printed Electronics World
Jun 23, 2020
Flexible and Recyclable Optoelectronics Move a Step Closer

Flexible and Recyclable Optoelectronics Move a Step Closer

Australian researchers have demonstrated the strong potential for a new type of flexible, recyclable electrodes to be used in creating cheaper solar cells, touchscreens, wearable 'e-skins' and next-generation responsive windows.
IDTechEx Research Subscribers
What Happened to Magic Leap?

What Happened to Magic Leap?

Magic Leap laid off 1000 employees in April 2020, and has switched to a enterprise market rather than a consumer market. Why?
Printed Electronics World
Jun 17, 2020
Flexible Hybrid Electronics: Strategies to Enable Cheaper Substrates

Flexible Hybrid Electronics: Strategies to Enable Cheaper Substrates

Picture a flexible circuit board (FPCB) and you will almost inevitably visualise a sheet of orange/brown plastic, probably with a few copper traces and maybe some soldered components on it. This plastic is PI (polyimide/Kapton), and its ubiquity is primarily due to its temperature resistance and general durability.
External Company Press Release
Flexible Hybrid Electronics Focused Solicitation Request for Proposals

Flexible Hybrid Electronics Focused Solicitation Request for Proposals

Since 1993, SEMI-FlexTech has funded over 200 projects in R&D, with a total public/private investment in excess of U.S. $220 million. SEMI-FlexTech solicits proposals from the flexible electronics industry for candidate projects which will receive funding.
Printed Electronics World
Jun 23, 2020
ROARTIS Introduces Fast Cure Materials for PE Applications

ROARTIS Introduces Fast Cure Materials for PE Applications

Belgium based ROARTIS BV, also known under their brandnames IQ- BOND® and IQ-CAST®, develops and manufactures adhesives, coatings and resins for high reliability electronic applications. In the past few years, special attention has been given to printed electronic applications, where high throughput processes required the development of faster assembly materials.
Printed Electronics World
Jun 22, 2020
New Supercapacitor Opens Door to Better Wearable Electronics

New Supercapacitor Opens Door to Better Wearable Electronics

Researchers have designed a high-performance, low-cost, environmentally friendly, and stretchable supercapacitor that can potentially be used in wearable electronics.
Printed Electronics World
Jun 17, 2020
Biogel for Soft Electronics Developed

Biogel for Soft Electronics Developed

Researchers introduce an elastic material made out of a non-polluting mix of gelatin and other edible ingredients. What is so special about the new bio-gel? It is elastic, flexible and easy to bend as well as sufficiently stable, allowing it to be combined with electronic components. This discovery forges new paths in the development of soft robotics.
Printed Electronics World
Jun 16, 2020
Updating the e-Textiles Mantra: An Analyst's Commentary

Updating the e-Textiles Mantra: An Analyst's Commentary

A recent article by IDTechEx Principal Analyst, James Hayward, written on the need to update e-textiles' traditional mantra which implies that "technology + comfort = success".
Printed Electronics World
Jun 16, 2020
Transparent Graphene Electrodes for New Generation of Solar Cells

Transparent Graphene Electrodes for New Generation of Solar Cells

A new way of making large sheets of high-quality, atomically thin graphene could lead to ultra-lightweight, flexible solar cells, and to new classes of light-emitting devices and other thin-film electronics.
More IDTechEx Journals